FANUC FAQ - Maintenance of [ROBOSHOT] screw

With the rapid development of the global logistics industry, there is an increasingly urgent need for enterprises to improve operational efficiency and reduce costs. As one of the world's leading manufacturers of industrial robots, FANUC Robotics has been more and more widely used in automation applications in the logistics industry. At...

As one of the world's four largest robot manufacturers, Japan's Fanuc Group (hereinafter referred to as Fanuc) officially opened a new robot factory in China. On December 2, the "super smart factory" of Shanghai Fanuc Robot Co., Ltd. (hereinafter referred to as Shanghai Fanuc) started construction in Shanghai, with a total investment of about 1 ...

In order to ensure the safe and reliable operation of the machine tool, the CNC system should usually be routinely inspected and tested first, regardless of whether the fault involves the following inspections. This type of inspection includes a visual inspection and a mains voltage inspection. ...

It must be installed every 3 years or replaced in a shorter period of 11,520 hours of operation.

Check whether the empty opening is tripped

Fix the mechanism part and the electrical part according to the maintenance instructions before transporting

Lower the resin temperature, reduce the injection speed, and increase the mold vent

Fanuc power failure: After the control power supply of the power module is turned on, the power supply is turned on and the display "PIL" does not light up. Cause analysis: 1. No AC power supply is provided. 2. Power supply circuit failure. (STATUS shows using a +5V power supply) Exclusion method: 1. Check the plug CX1 ...

The program name is 7 digits, which consists of a PNS and a 4-digit program number (insufficient bits are filled with 0).

In order to help users in different industries better improve production efficiency and flexibility of production processes, FANUC has launched a new SCARA robot, SR-20iA. With a carrying weight of 20 kg and an arm span of 1,100 mm, the SR-20iA inherits the high compactness and high operability of the FANUC SCARA series.

Digitalization is driving the plastics industry's manufacturing systems to become more intelligent. At every stage of production, digital smart manufacturing systems help companies meet current and future challenges. CHINAPLAS 2023 IS ABOUT TO KICK OFF, AND FANUC WILL BRING A NEW GENERATION OF PRECISION ELECTRIC INJECTION MOLDING MACHINE ROBOSHOT α ...

TORCH MATE – Automatic torch recovery • Basic concepts Torch Mate is a low-cost, convenient and practical solution for automatic TCP tuning. •use Use the Torch Mate to automatically compensate for TCP inaccuracies due to a bent torch neck or worn contact tips. ...

In the context of globalization, the textile and apparel industry is facing quarterly labor shortages and insufficient equipment numbers. At the same time, there are unfavorable factors such as noise, temperature and humidity, and air cleanliness in the textile workshop that affect the work of operators. The two pain points are superimposed, and the textile industry is promoted to achieve self-improvement.

Clean the wire trimmer and adjust the cylinder clamp piece

The main advantages of spraying robots are (1) they are flexible. The scope of work is large. (2) Improve the quality of spraying and the use of materials. (3) Easy to operate and maintain. It can be programmed offline, which greatly shortens the on-site debugging time. (4) High equipment utilization. The utilization rate of the spraying robot can reach 90%-95%. ...

The FANUC system is the system hardware, including scientific research, design, and manufacturing. The FANUC system was created by FANUC and developed in Japan. The role of the FANUC system is to include: 1. The spindle control loop is closed.

Three-phase 170V-242V, three-phase 200+ 10%V is recommended

The use of industrial robots is now a trend because the use of stand-alone and responsive systems can increase productivity and reduce the cost per part of the product. Welding is carried out by an automated device connected to a stand-alone Ethercat computer-aided robot ...

At present, Shanghai is in the critical stage of epidemic prevention and control, and when the city implements global static management, they are carrying their bags and going "retrograde" to the front line of production... According to the latest epidemic prevention requirements of Shanghai, Shanghai Fanuc actively responded and combined with the actual situation of the company.

The application of industrial robots in the foundry industry can not only ensure the quality of castings, but also alleviate the contradiction of labor shortage. At the upcoming China International Foundry Metallurgical Exhibition, ...