Description: E+H/Endershaus digital fluorescence dissolved oxygen sensor Memosens COS81E, Memosens COS81E digital fluorescence dissolved oxygen sensor, ideal for hygienic applications.
Features:
The Memosens COS81E is designed in accordance with EHEDG and ASME BPE standards. Eliminates the risk of cross-contamination and meets the requirements of United States Pharmacopeia USP Cl. VI, FDA certification, GMP and GLP specifications.
Long uptime: Allows the laboratory to pre-calibrate the sensor, plug and play, and quickly change the sensor online. No polarization time is required and it is put into use immediately after installation.
Reliable measurement results: Built-in reference LED light source compensates for the aging of the measured LED light source. Even after CIP/SIP and autoclaving processes, the measured values remain precise.
Low maintenance: Memosens COS81E can be easily replaced with electrolytes or sensitive sensor membranes. Simply replace the sensor cap and perform the sensor calibration.
The sensors can be installed in the process and used in fermenters. From the first laboratory trials to series production and laboratory applications, the results are consistent and consistent.
The sensors are explosion-proof and can be measured in dust-proof areas, making them particularly suitable for inert protection against oxidation processes.
IIoT support: Memosens 2.0 supports extended data storage, storage of calibration and process parameters, and better trend identification, which is the basis for the implementation of predictive maintenance and the advancement of IIoT technology.
Product parameters
Measuring principle
Optical oxygen measurement
apply
• Oxygen control in fermenters, e.g. in the pharmaceutical or biotechnology sectors
• Monitor oxygen concentration to ≥ 2% Vol
% of explosive atmospheres • Quality control in the food industry
Installation
Standard process connection PG 13.5 is available
Installed in a standard pH assembly
peculiarity
Hygienic optical sensor for stable oxygen measurement over multiple sterilization cycles
Measuring range
0.004 to 30 mg/L
0.05 to 330% SAT
0.1 to 700 hPa
Measuring principle
Luminescence quenching principle
devise
Optical system, stainless steel
Material
Sensor shaft: Stainless steel 1.4435 (AISI 316L) Process seals: FKM (USP<87>, <88> Class VI and FDA) Explosion-proof version of process seals: FKM (FDA non-compliant) Seals/O-rings: EPDM, FFKM (USP<87>, <88> Class VI and
FDA）
Dot cap: stainless steel 1.4435 (AISI 316L), titanium or Hastelloy
Dot Layer: Silicone (USP<87>, <88> Class VI and FDA)
Dimensions
Diameter: 12 mm (0.47 in.)
Shaft lengths: 120, 160, 220, 320 and 420 mm
(4.7, 6.3, 8.7, 12.6 and 16.5 inches)
Process temperature
1 to 140 °C
(32 to 284 °F)
Process pressure
0.02 to 13 bar absolute pressure
(0 to 190 psi)
Temperature sensor
Pt1000
Explosion-proof certification
ATEX, IECEx, NEPSI, Japan and INMETRO approvals for use in hazardous areas Zone 0, 1 and 2, as well as dust
Zone 20, Zone 21 and Zone 22 of the hazardous area.
CSA C/US approved for use:
Hazardous Area Class I, Zone 1 and Class II, Class 1 Dust Hazardous Area.
connect
Inductive digital connectors with Memosens 2.0 technology
Ingress protection
IP68
IP69
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action and every detail of the service is professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the E+H/Endershaus digital fluorescence dissolved oxygen sensor Memosens COS81E product, if you are interested in the E+H/Endershaus digital fluorescence dissolved oxygen sensor, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TW11 Insertion depth 4 mm
Introduction: E+H/Endershaus Temperature Sensor Protective Sleeve TW11, this metal protective sleeve is an important component for temperature measurement points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and prevents the temperature sensor from being ...
|
|
E+H/Endershaus Bar Protector TA555 has a maximum insertion depth of 5 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA555, because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H Proline Promass X 300 Gas error ± 0.35%
Description: The E+H/Endershaus mass flow meter Proline Promass X 300 with patented four measuring tubes with Premium measurement accuracy (0.05 %) and maximum flow capacity provides excellent performance in coastal/offshore applications in the oil and gas industry. Compatible with the all-in-one transmitter ...
|
|
E+H/Endershaus Dissolved Oxygen Measurement Mounting Bracket Cleanfit COA451
Introduction: E+H/Endershaus Dissolved Oxygen Measurement Mounting Bracket Cleanfit COA451, Cleanfit COA451 is a retractable bracket for dissolved oxygen measurement in all areas, it is equipped with brake bolts, O-rings and ball valves, so that the sensor chamber and the process are completely separated, allowing the sensor chamber to be completely separated from the process, allowing ...
|
|
E+H/Endershaus PROFIBUS gateway Fieldgate SFG500
Introduction: E+H/Endershaus PROFIBUS gateway Fieldgate SFG500, Fieldgate SFG500 provides independent access paths for access to PROFIBUS networks, and its wide range of applications is supported by various operating modes. The wide range of applications of the Fieldgate SFG500 has been ...
|
|
E+H/Endershaus thermocouple sensor TSC310 with a maximum process pressure of 25 bar
Introduction: The E+H/Endershaus thermocouple sensor TSC310 offers a high level of operational safety thanks to its simple installation and reliable and accurate temperature measurement in common process applications. The probes are particularly suitable for measuring gaseous and liquid states in machinery, laboratory instruments and factories.
|
|
E+H/Endershaus Radiometric Level and Density Measurement Gammapilot FMG50
Introduction: E+H/Endershaus Radioactive Level and Density Measurement Gammapilot FMG50, the Gammapilot FMG50 all-in-one transmitter enables non-contact point level detection, continuous level measurement, interface measurement and density measurement in liquids, solids, suspensions or sludge.
...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI56
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI56, Solicap FTI56 fully insulated or semi-insulated cable probes are rugged for the detection of fine and coarse solids. With its automatic adhesion compensation, the probe offers the highest measurement yield.
|
|
E+H/Endershaus resistance thermometer iTHERM TM401
Introduction: E+H/Endershaus resistance thermometer iTHERM TM401, the iTHERM thermometer is designed to meet the essential requirements of the food & beverage and life sciences industries at the best price.
Features:
From product selection to maintenance, it makes users feel friendly and reliable
International...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT71
Description: The E+H/Endershaus temperature transmitter iTEMP TMT71 offers unmatched reliability, measurement accuracy and long-term stability when used in critical process segments in all industries. The transmitter can be configured to receive not only RTD and thermocouple (TC) signals, but also ...
|
|
E+H Proline Prosonic Flow 91W
Description: The E+H/Endershaus Ultrasonic Flow 91W strapped sensor is designed for flow measurement of water and wastewater. In combination with the cost-effective Prosonic Flow 91 transmitter with a button, the Prosonic Flow ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 500 Measuring Tube 1.4539
Description: The E+H/Endershaus mass flow meter Proline Promass E 500 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. In combination with the innovative split transmitter, ...
|
|
E+H/Endershaus Ultrasonic Sludge Interface Sensor Turbimax CUS71D IP68
Description: E+H/Endershaus Ultrasonic sludge interface sensors Turbimax CUS71D, Turbimax CUS71D continuously monitor the separating and transition layers in clarifiers and sedimentation tanks for safe, cost-effective and efficient sedimentation processes.
Features:
Reliable: Sensors ...
|
|
E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB50 0.2% Accuracy
Description: The E+H/Endershaus hydrostatic level gauge Deltapilot FMB50 is an integrated transmitter with an anti-condensation Contite measuring cell, mainly used in the process and hygiene industries for measuring the level of liquids or slurry media in open or closed containers.
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF12S
Introduction: E+H/Endershaus High Temperature Thermocouple Thermometer TAF12S, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and a thermocouple made of special metals such as platinum and rhodium. The special material sheath protects the working elements during the measurement process and prevents mechanical damage or chemical damage.
|
|
E+H/Endershaus digital pH/ORP combination electrode Memosens CPS76E
Introduction: E+H/Endershaus Memosens CPS76E, a digital pH/ORP combination electrode, is a specialist for demanding applications and is capable of simultaneous pH and ORP measurements. The unique stain-resistant reference system reliably measures heavily contaminated and low conductivity media. ...
|
|
E+H/Endershaus Modular RTD Thermometer TH11
Introduction: E+H/Endershaus Modular RTD Thermometer TH11, TH11 is a RTD temperature sensor for use in the process industry or in environmentally friendly factory automation. It consists of a thermal resistance (RTD) measuring probe, an insulating layer, and an armored core.
Features:
Flexible to use: ...
|
|
E+H/Endershaus iTHERM ModuLine TT151
Introduction: E+H/Endershaus iTHERM ModuLine TT151, TT151 protective sleeves are designed in accordance with DIN 43772, ASME B40.9, NAMUR NE 170 standards and can also be customized according to user requirements.
Features:
TT151 Standard Industrial Protective Sleeve, Composed of Integral Bar ...
|
|
E+H Proline Promass F 100 Gas error ± 0.35%
Introduction: E+H/Endershaus Mass Flow Meter Proline Promass F 100 is the best tool for system integrators, skid-mounted equipment manufacturers for accurate measurement under changing process conditions, and in combination with the smallest transmitter available.
|
|
E+H/Endershaus industrial thermometer iTHERM ModuLine TM121
Description: E+H/Endershaus industrial thermometer iTHERM ModuLine TM121, basic RTD or thermocouple thermometer for use in non-hazardous areas with standard extension neck, economical to use.
Features:
Reliable measurement and economical use
From product selection to ...
|
|
Contact
working hours
