PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 50 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay), IP20 (relay base), ≥ IP54 (mounting position)
Coil side
Rated input voltage: UN 230 V AC, 220 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (220 V DC), 3 ms ... 15 ms （230 V AC）
Typical release time 10 ms (220 V DC)
Typical release time range 3 ms ... 15 ms （230 V AC）
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13), 1.5 A (230 V, AC15)
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the relay module with manual operation locking function of Germany brand Phoenix - PLC-RSC-230UC/21-21/MS - 2910506 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-220DC/2X21 - 2903665
Plug-in industrial relay with power contacts, 2 PDTs, test button, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/2X21/FG-2910539
PLC-INTERFACE, including relay base and plug-in safety relay, with positively guided contacts according to DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, bridge rectifier, input voltage: 24 V AC/DC
Maximum ...
|
|
Phoenix relay EMG 17-REL/KSR-G 24/2E/SO38 - 2941646
Relay module, resistant to continuous high current, soldered with relay plug, contacts (AgSnO): medium to large loads, 1 normally open contact, input voltage 24V DC, maximum continuous current 10A, 2 inputs manual/automatic
advantage
Can be snapped onto standard EN DIN rails
...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/ 1AU/SEN - 2900315
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix Single Relay REL-MR-110DC/21-21 - 2961202
Pluggable miniature power relay with power contacts, 2 PDTs, input voltage 110 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Break off...
|
|
Phoenix/Phoenix relay module RIF-0-RSC-24DC/ 1AU -2903364
Prefabricated relay modules with screw connections, including: relay base with ejection device and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 24 V DC
The maximum power consumption under the rated condition is 0.22 W
Test voltage (coil/contact) 4 k ...
|
|
Relay module with manually operated locking - PLC-RSC- 48DC/21HC/MS - 2910516
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 1 changeover contact, input voltage: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix safety relays - REL-SR- 24DC/3X1AU/1X2AU/FG 1157954
Safety relays with mechanically interlocking contacts in accordance with DIN EN 61810-3 (Class A), input voltage 24 V DC, with multi-layer gold-plated contacts, 3 NO contacts and 1 NC contact
The maximum power consumption under rated conditions is 0.36 W
Test voltage Coil/contact 4 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21 - 2966184
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and the plug-in miniature relay with multi-level contacts, can be mounted on the NS 35/7.5 rail, 1PDT, input voltage 24V AC/DC
advantage
Low-profile design
Effective ...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21HC/MS - 2910514
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 1 changeover contact, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 12DC/21HC 2900290
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, input voltage 12 V DC
advantage
...
|
|
RIF-2-RSC-LDP-125DC/2X21 relay module from Phoenix/Phoenix - 2903324
Prefabricated relay modules with screw connections, including: relay bases, high-power contact relays and brackets. Contact type: 2 changeover contacts. Input voltage: 125 V DC
The maximum power consumption under rated conditions is 0.94 W
Test voltage (coil/contact) 2.5 kVrms ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1AU/SEN - 2966317
The PLC-INTERFACE is suitable for input functions, including PLC-BSC.../SEN base terminals with screw connection with plug-in miniature multilayer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Maximum savings of 60 ...
|
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
...
|
|
RIF-1-RPT-LDP-24DC/2X21/FG relay module from Phoenix/Phoenix - 2908215
Prefabricated relay modules with plug-in interfaces, including: relay base, safety relay with positively guided contacts (according to DIN EN 61810-3), plug-in display/interference suppression module and bracket, contact type: 2 changeover contacts, input voltage: 24 V DC
Line...
|
|
PLC-RPT-120UC/21/SO46 - 1125988
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BPT-120UC/21/SO46 base terminal block with plug-in connection, plug-in miniature relay with power contacts up to 6 A, 1 changeover contact, 120 V AC input voltage
Maximum ...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21-21AU/MS - 2910508
PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE MULTI-LAYER GOLD CONTACT RELAY WITH MANUAL OPERATION AND INTEGRATED STATUS LED, SCREW CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental Strip ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/21-21AU - 2961299
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 12 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 V DC ... 29.76 V DC
Typical input current at UN ...
|
|
RIF-1-RSC-LV-120AC/2X21 - 2903348
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 120 V AC
Maximum power consumption of 1 W under rated conditions
Measure...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21 - 2961150
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
size
...
|
|
Contact
working hours
