Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 24 V AC
Trunk frequency 50/60 Hz
Typical input current at UN is 66 mA
Typical response time 5 ms ... 15 ms (phase dependent)
Typical release time range 5 ms ... 20 ms (phase dependent)
The status display LED is yellow
Power consumption at rated conditions is 1.58 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/L- 24AC/4X21AU - 2903683 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24DC/21-21/MS - 2987943
Plug-in miniature relay with power contacts, 2 PDTs, test keys, mechanical switch position display, status LED, freewheeling diode, polarity A1+, A2, input voltage 24 V DC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integrated status LEDs
Mechanical ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21AU/RW - 2900349
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature multi-layer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 24 V DC
Excellent...
|
|
RIF-1-RPT-LDP-24DC/2X21/FG relay module from Phoenix/Phoenix - 2908215
Prefabricated relay modules with plug-in interfaces, including: relay base, safety relay with positively guided contacts (according to DIN EN 61810-3), plug-in display/interference suppression module and bracket, contact type: 2 changeover contacts, input voltage: 24 V DC
Line...
|
|
Phoenix PLC-RSC-220DC/21AU - Relay module 2987286
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 220 V DC
Product Type: Relay Module
Product range PLC-IN ...
|
|
REL-MR- 60DC/21HC - 2961325 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, 60 V DC
advantage
Switching current up to 16 A
Coil side
Rated input voltage UN 60 V DC
Input voltage range 39 V DC ... 144 V DC
Typical input under UN ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/ 1AU/SEN - 2900315
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix relay modules EMG 22-REL/KSR-230/21/AU - 2949295
Relay module with solid-state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 1PDT, input voltage 230V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21/EX - 2909522
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
REL-MR-12DC/21-21/C1D2 - 2906988
Plug-in miniature power relay, RT III hermetically sealed, with power contacts, 2 changeover contacts, input voltage: 12 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Coil side
Rated input voltage U ...
|
|
Phoenix/Phoenix relay modules PLC-RSC-230AC/21HC/SO46/HI-1079402
The PLC-INTERFACE consists of PLC-BSC.../21HC/SO46/HI base terminals with screw connection and Push-in miniature relays for high continuous currents, 1 changeover contact, rated input voltage of 230 V AC, defined activation and deactivation thresholds
The most ...
|
|
Phoenix/Phoenix relay modules EMG 17-REL/KSR-120/21-21-LC -2940427
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 2PDT, input voltage 120 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 24DC/ 1/MS/ACT - 2909661
The PLC-INTERFACE is suitable for output functions, including the PLC-BSC.../ACT base terminal with screw connection, plug-in miniature relay with power contacts and manual operation, 1 normally open contact, 24 V DC input voltage
advantage
Direct connection to relay module ...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21AU -2947721
Relay module with solid-state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 1PDT, input voltage 24VAC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21AU - 2961121
Pluggable miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Give birth...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-115AC/4X21 - 1109564
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 12DC/4X21AU - 2903669
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix Time Relays Timing Relay - PLC-TR-1T-MUL-300M-PT - 2910141
Ultra-slim multi-function time relay with 4 functions, adjustable time range (0.1s - 300 min), 1 PDT, in-line connection
size
Width 6.2 mm
Height 80 mm
Depth 86 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 65 °C
Ring...
|
|
RIF-1-RSC-LDP-24DC/2X21/FG relay module from Phoenix - 2909848
Prefabricated relay modules with screw connection, including: relay base, safety relay with positively guided contacts (acc. to DIN EN 61810-3), plug-in display/interference suppression module and bracket, contact type: 2 changeover contacts, input voltage: 24 V DC
...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21 - 2951885
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
REL-FO/L-110DC/1X21 - 1308299
Pluggable miniature relay, FASTON connection, 1 changeover contact, status display: LED yellow, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 5x 107 switching cycles
Relay type: electromechanical relay
...
|
|
Contact
working hours
