The PLC-INTERFACE is suitable for output functions, including the PLC-BSC.../ACT base terminal with screw connection, plug-in miniature relay with power contacts and manual operation, 1 normally open contact, 24 V DC input voltage
advantage
Actuators connected directly to relay modules
Efficient system connectivity via V8 adapter
No additional combination terminal blocks are required
Up to 60% installation time savings
Safely isolated relay module between coil and contact in accordance with DIN EN 50178
Up to 80 % installation space savings
Functional plug-in bridges
size
Width 6.2 mm
Height 80 mm
Depth 94 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 60 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT II (relay)
IP20 (Relay Base)
Coil side
Rated input voltage UN 24 V DC
Typical input current at UN is 9 mA
Typical response time is 5 ms
Typical release time is 8 ms
Protection Circuits Polarity Protection Polarity Protection Diodes
Standby diode Damping diode
The operating voltage is displayed with a yellow LED
Power consumption at rated conditions is 0.22 W
Contact side
Contact Type: 1 N/O contact
Switch contact type Single contact
Contact material AgSnO
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 5 V (at 100 mA)
Minimum switching current 10 mA at 12 V
Max. start-up current 10 A (4 s)
Limit continuous current to 6 A
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 1x 107 cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module - PLC-RSC- 24DC/ 1/MS/ACT - 2909661 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21HC - 2967620
PLC-INTERFACE FOR HIGH CONTINUOUS CURRENT, INCL. PLC-BSC.../21 HC BASE TERMINAL WITH SCREW CONNECTION AND "HOT" MATING MINIATURE RELAY FOR MOUNTING ON NS 35/7,5 DIN RAIL, LIMIT CONTINUOUS CURRENT UP TO 10 A, 1 CO CONTACT, INPUT VOLTAGE 24 V DC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21AU - 2900306
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 12DC/21-21AU - 2900337
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 12 V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix relay module EMG 17-REL/KSR- 24/21-21-LC - 2940391
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 2PDT, input voltage 24 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Coil side
Forehead...
|
|
The PLC-RPT-230UC/21HC relay module from Phoenix 2900297
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, and an input voltage of 230 V AC/DC
Excellent...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-100AC/21-21/MS - 2908183
Plug-in miniature relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100VAC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
Phoenix/Phoenix safety relays - REL-SR- 24DC/3X1AU/1X2AU/FG 1157954
Safety relays with mechanically interlocking contacts in accordance with DIN EN 61810-3 (Class A), input voltage 24 V DC, with multi-layer gold-plated contacts, 3 NO contacts and 1 NC contact
The maximum power consumption under rated conditions is 0.36 W
Test voltage Coil/contact 4 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21HC/RW - 2900324
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals with plug-in connection and plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
Advantage...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21/MS - 2909667
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 24 V DC input voltage
advantage
Low-profile design
Effective system connectivity via V8 adapter
|
|
REL-PR3-230AC/3X1 2903709 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range 195.5 V AC ... 253 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input electricity under UN ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21 - 2900336
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and the plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 230 V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix Single Relay REL-PR3- 24AC/3X1 - 2903707
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 24 V AC
Coil side
Rated input voltage UN 24 V AC
Input voltage range 20.4 V AC ... 26.4 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN ...
|
|
Phoenix/Phoenix relay module RIF-1-RSC-LDP-12DC/1IC -1078803
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 NO contact, max. inrush current peak up to 130 A, 80 A (20 ms), output voltage 12 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 12DC/4X21 - 2903676
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix relay module PLC-RPT-24DC/21/EX - 2909528
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with plug-in connection and "hot" plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. ATEX/IECEx (Zone 2) and Ex zone Class I, Div. 2 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21/MS - 2909641
Plug-in miniature power relay with power contact, 1 changeover contact, manual operation, 12 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
The maximum power consumption under the rated condition is 0.22 W
Test Electricity ...
|
|
Relay module with manual locking - RIF-1-RPT-LDP-24DC/1X21MS - 2905289
Pre-assembled relay modules with plug-in connections, including: relay base, relay bracket, high-power contact relay with test button, integrated status LEDs and freewheeling diode. Contact type: 1 PDT. Input voltage: 24 V DC
The complete range of products in the RIFLINE range ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-SL-2T-I - 2866174
Pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-range power supply, 2 PDT
Increasing demands are placed on safety and system reliability in all areas. Processes in mechanical engineering, the chemical industry, power plants and automation technology are becoming more and more complex.
|
|
Contact
working hours
