INTRODUCTION: SCHMERSAL/SCHMERSAL SAFETY SWITCH AZ16ZVRK-M16
Features:
3 cable inlet M 16 x 1.5
With LED optional
Large wiring room
Thermoplastic housing
Double insulation
52 mm x 90 mm x 30 mm
Multi-coding
Long life
High level of contact reliability at low voltage and low current
Insensitive to dust
The long slotted hole can be adjusted, and the round hole is used to fix the position
Product parameters
Code grade according to ISO 14119: Low
Housing Material: Plastic, fiberglass reinforced thermoplastic, self-extinguishing
Contact Material, Electrical: Silver
Gross weight: 115 g
Mechanical life, min: 1,000,000 operations
Locking force: 30 N
Positive disconnect stroke: 8 mm
Actuation speed, max.: 2 m/s
Terminal Connector: Screw terminal
Cable entry: 3 x M16 x 1,5
Cable cross-section, min. 0.25 mm²
Cable cross-section, max.: 2.5 mm²
Degree of protection: IP67 according to EN 60529
Ambient temperature, min.: -30 °C
Ambient temperature, max.: +80 °C
Storage and transport temperature, min.: -40 °C
Storage and transport temperature, max.: +85 °C
Altitudes are allowed to be installed, maximum: 2,000 m
Rated insulation voltage Ui: 500 V
Rated impulse withstand voltage Uimp: 4 kV
Overvoltage Level: III
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the SCMERSAL SCHMERSAL safety switch AZ16ZVRK-M16 products, if you are interested in SCMERSAL SCHMERSAL safety switch, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
SCHMERSAL safety lock AZM201Z-I2-ST2-T-1P2PW locking force 30N
Description: SCHMERSAL safety lock AZM201Z-I2-ST2-T-1P2PW, sensor technology allows a deviation of 5 mm ±vertically and ± 3 mm horizontally between the actuator and the latch
Features:
Duplicate individual coding with RFID technology
Power on to unlock
...
|
|
Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 200CC-T-1P2P working current 50mA
Introduction: Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 200CC-T-1P2P
Features:
Lock monitoring
Thermoplastic housing
Electronic non-contact, coding system
The maximum length of the sensor chain is 200 m
31. Self-monitoring of series sensors
...
|
|
SCHMERSAL Security Lock MZM 100 ST-1P2PR-A Gross weight 635g
Introduction: SCHMERSAL security lock MZM 100 ST-1P2PR-A
Features:
Lock monitoring
Coupling M23, 8+1-core
Powered on, locked
Auto-lock
Safety solenoid lock with unique and innovative working principle (to protect people)
...
|
|
Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 161CC-12/12KAT-024
Introduction: Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 161CC-12/12KAT-024
Features:
Large wiring room
Emergency escape
Cable inlet 4 M 16 x 1.5
Thermoplastic housing
Double insulation
Interlock protection prevents improper locking ...
|
|
Schmersal controller PSC1-C-100-FB1 depth 115mm
Introduction: The Schmersal safety controller PSC1-C-100-FB1 has 6 signal outputs, 2 safety relay contacts, 4 safe 2 A pp switching semiconductor outputs, and can be switched to 2 safety p-/n-switching semiconductor inputs.
...
|
|
SCHMERSAL safety switch AZ 17-02ZRK-2243 Gross weight 425g
Introduction: SCHMERSAL safety switch AZ 17-02ZRK-2243 front cable inlet, can be derived, 30 mm x 60 mm x 30 mm, high contact reliability with low voltage and low current, insensitive to dust, 8 operating surfaces
Features:
Thermoplastic housing
...
|
|
Schmersal safety sensor RSS16-D-R-SK 2100mA
Description: The Schmersal / SCHMERSAL safety sensor RSS16-D-R-SK with locking, suitable for series wiring, connection terminal or plug connection, universal coding with RFID technology, tamper-proof RFID technology based on requirements.
Give birth...
|
|
SCHMERSAL Safety Lock AZM300B-ST-1P2P-A Gross Weight 600g
Introduction: SCHMERSAL Safety Lock AZM300B-ST-1P2P-A
Features:
Universal coding for RFID technology
Coupling M12, 8-pole
Powered on, locked
Actuators are monitored
Diagnostic output
Hygienic design
Ingress Protection ...
|
|
Schmersal / SCHMERSAL controller PSC1-C-10-MC semiconductor output
Introduction: The Schmersal safety controller PSC1-C-10-MC has 2 signal outputs, 2 safety relay contacts, 4 safe 2 A pp switching semiconductor outputs, and 14 safety inputs on the basic module.
Give birth...
|
|
The Schmersal controller PSC1-C-100-MC has a width of 112.5 mm
Introduction: The Schmersal safety controller PSC1-C-100-MC has 6 signal outputs, 2 safety relay contacts, and 4 safe 2 A pp switching semiconductor outputs that can be switched to 2 safe p-/n-switching semiconductor outputs.
...
|
|
SCHMERSAL safety lock AZM201Z-I1-ST2-T-1P2PW
Introduction: SCHMERSAL Safety Lock AZM201Z-I1-ST2-T-1P2PW
Features:
Individually coded with RFID technology
Power on to unlock
Lock monitoring
Thermoplastic housing
The maximum length of the sensor chain is 200 m
31 series sensors ...
|
|
Schmersal / SCHMERSAL safety sensor RSS16-I2-D-CC block
Description: The Schmersal / SCHMERSAL safety sensor RSS16-I2-D-CC with locking, suitable for series wiring, connection terminal or plug connection, with repeated individual coding with RFID technology, tamper-proof RFID technology based on requirements.
...
|
|
The Schmersal RSS36-D-R-ST sensor has a switching distance of 12 mm
Description: Schmersal / SCHMERSAL safety sensor RSS36-D-R-ST THERMOPLASTIC HOUSING, OPERATED FROM THE SIDE, HIGH REPEATABILITY SWITCHING CONTACTS WITH SHORT CIRCUIT DETECTION, WIRE BREAK, EXTERNAL VOLTAGE MONITORING OF SAFETY CABLES, RIGHT UP TO THE CONTROL BOX.
Products...
|
|
The Schmersal / SCHMERSAL sensor CSS 11-300-D-M-ST weighs 135g
Introduction: Schmersal safety sensor CSS15-30-2P+D-M-L thermoplastic housing, high repeatability switch contacts, up to 31 sensor switches connected in series, with short circuit detection, wire break, external voltage monitoring of safety cables, up to the control box.
...
|
|
Germany Schmersal / SCHMERSAL safety relay AZ16-02ZVRK-M16 gross weight 115g
Introduction: Germany Schmersal / SCHMERSAL safety relay AZ16-02ZVRK-M16
Features:
3 cable inlet M 16 x 1.5
Large wiring room
Thermoplastic housing
Double insulation
52 mm x 90 mm x 30 mm
Multi-coding
Long...
|
|
Schmersal Safety Light Curtain SLC440COM-ER-0330-14
Introduction: SCHMERSAL Safety Light Curtain SLC440COM-ER-0330-14 Active Integrated Setup Tool; Automatic start or restart of interlocks; Process safety with the highest availability; Safety Type 4 according to IEC 61496-1; Status and diagnostics via the Bluetooth app.
...
|
|
Germany SCHMERSAL Safety Relay SRB201ZH 24VDC Gross Weight 250g
Description: Germany Schmersal safety relays SRB201ZH 24VDC for connection to active signal outputs (AOPDs), e.g. safety light curtains/light curtains, for passive output signal processing, e.g. emergency stop command devices, safety position switches, door lock switches
...
|
|
Schmersal Safety Controller PSC1-E-21-SDM1
Introduction: The Schmersal safety controller PSC1-E-21-SDM1 has 12 digital failsafe inputs and supports encoders: TTL, sin/cos, SSI, and safe drive monitoring of 1 axis according to EN 61800-5-2 (SDM – Safe Drive Monitoring).
...
|
|
SCHMERSAL limit switch PS116-T11-LR200-K200 has a minimum operating force of 7.5 N
Introduction: SCHMERSAL limit switch PS116-T11-LR200-K200
Features:
Belt line right, 2 m
Slow-acting 1 NO (NO) / 1 Open (NC)
Thermoplastic housing
Symmetrical shell
Degree of protection IP66, IP67
...
|
|
Germany SCHMERSAL Safety Relay SRB301MC-24V Gross Weight 250g
Introduction: Germany Schmersal / SCHMERSAL safety relay SRB301MC-24V
Features:
Suitable for output signal processing of contact sensors
3 Safety contacts, STOP 0
1 Signal output
Suitable for connection to active signal outputs (AOPDs), ...
|
|
Contact
working hours
