Description: The Schmersal / SCHMERSAL safety sensor RSS16-D-R-SK with locking, suitable for series wiring, connection terminal or plug connection, universal coding with RFID technology, tamper-proof RFID technology based on requirements.
Features:
Screw connection
Serial cables
Thermoplastic housing
3 Different directions of operation
Magnetically lock the latch
Product parameters
Product name: RSS16
Standard: EC 60947-5-3
How it works: RFID
Enclosure structure type: Block
Installation condition (mechanical): non-flushed
Sensor topology: Sensors are connected in series
Housing Material: Plastic, fiberglass reinforced thermoplastic, self-extinguishing
Active area: fiberglass, reinforced thermoplastic
Gross weight: 208 g
Ready time, max.: 2,000 ms
Response time, max.: 100 ms
Risk duration, maximum: 200 ms
Number of LED lights: 2
Number of semiconductor outputs with signal function: 1
Number of fail-safe digital outputs: 2
Standard:
ISO 13849-1
IEC 60947-5-3
EN 62061
IEC 61508
Control category, according to EN13849:4
PFH value: 6.30 x 10⁻¹¹ /h
Safety Integrity Level (SIL): 3
Duration: 20 years
Operator Panel:
front
behind
from the head
Activity Area:
Transverse
front
Side covers
Mounting: 2 x M5, cylinder head screws
Switching distance: 15 mm
Guaranteed switching distance "ON" Sao: 5 mm
Guaranteed switching distance "OFF" Sar: 30 mm
Hysteresis (switching distance), max.: 2 mm
Repeatability R: 0.5 mm
Tightening torque of screw l, max.: 2 Nm
Sensor height: 30 mm
Sensor length: 91 mm
Sensor width: 52 mm
Ingress Protection:
IP 65 according to IEC/EN 60529
IP 67 according to IEC/EN 60529
Ambient temperature, min: -25 °C
Ambient temperature, max.: +70 °C
Storage and transport temperature, min.: -25 °C
Storage and transport temperature, max.: +85 °C
Impact resistance: 30 g / 11 ms
Rated impulse withstand voltage: 0.8 kV
Pollution class according to VDE 0100:3
Voltage Type: DC (DC)
No-load current: 100 mA
Rated operating voltage, min: 20.4 VDC
Rated operating voltage, max: 26.4 VDC
Operating current: 2,100 mA
Rated short-circuit current according to EN 60947-5-1: 100 A
Conversion frequency, approximately: 1 Hz
Rated operating current (safety output): 1,000 mA
Output current (fail-safe output), max.:
1 A
P-type
1 V
Current drainage: 0.5 mA
This article introduces the Schmersal / SCHMERSAL safety sensor RSS16-D-R-SK 2100mA products, if you are interested in Schmersal / SCHMERSAL safety sensor, also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 161CC-12/12KAT-024
Introduction: Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 161CC-12/12KAT-024
Features:
Large wiring room
Emergency escape
Cable inlet 4 M 16 x 1.5
Thermoplastic housing
Double insulation
Interlock protection prevents improper locking ...
|
|
SCHMERSAL Safety Lock AZM300B-ST-1P2P-A Gross Weight 600g
Introduction: SCHMERSAL Safety Lock AZM300B-ST-1P2P-A
Features:
Universal coding for RFID technology
Coupling M12, 8-pole
Powered on, locked
Actuators are monitored
Diagnostic output
Hygienic design
Ingress Protection ...
|
|
Schmersal input expansion module SRB-E-204ST 125mA
Introduction: The Schmersal input expansion module SRB-E-204ST has STOP 0 function, 2 safety outputs, 4 signal outputs, monitoring 4 sensors, start button / self-start function. Quick installation of DIN rails according to EN 60715
...
|
|
SCHMERSAL Security Lock MZM 100 ST-1P2PR-A Gross weight 635g
Introduction: SCHMERSAL security lock MZM 100 ST-1P2PR-A
Features:
Lock monitoring
Coupling M23, 8+1-core
Powered on, locked
Auto-lock
Safety solenoid lock with unique and innovative working principle (to protect people)
...
|
|
Schmersal Safety Light Curtain SLC440COM-ER-0330-14
Introduction: SCHMERSAL Safety Light Curtain SLC440COM-ER-0330-14 Active Integrated Setup Tool; Automatic start or restart of interlocks; Process safety with the highest availability; Safety Type 4 according to IEC 61496-1; Status and diagnostics via the Bluetooth app.
...
|
|
SCHMERSAL safety switch AZ16ZVRK-M16 with a locking force of 30N
INTRODUCTION: SCHMERSAL/SCHMERSAL SAFETY SWITCH AZ16ZVRK-M16
Features:
3 cable inlet M 16 x 1.5
With LED optional
Large wiring room
Thermoplastic housing
Double insulation
52 mm x 90 mm x 30 mm
Multi-coding
...
|
|
SCHMERSAL safety lock AZM201Z-I2-ST2-T-1P2PW locking force 30N
Description: SCHMERSAL safety lock AZM201Z-I2-ST2-T-1P2PW, sensor technology allows a deviation of 5 mm ±vertically and ± 3 mm horizontally between the actuator and the latch
Features:
Duplicate individual coding with RFID technology
Power on to unlock
...
|
|
Schmersal Safety Controller PSC1-E-21-SDM1
Introduction: The Schmersal safety controller PSC1-E-21-SDM1 has 12 digital failsafe inputs and supports encoders: TTL, sin/cos, SSI, and safe drive monitoring of 1 axis according to EN 61800-5-2 (SDM – Safe Drive Monitoring).
...
|
|
The Schmersal / SCHMERSAL sensor CSS 11-300-D-M-ST weighs 135g
Introduction: Schmersal safety sensor CSS15-30-2P+D-M-L thermoplastic housing, high repeatability switch contacts, up to 31 sensor switches connected in series, with short circuit detection, wire break, external voltage monitoring of safety cables, up to the control box.
...
|
|
Schmersal / SCHMERSAL safety sensor RSS16-I2-D-CC block
Description: The Schmersal / SCHMERSAL safety sensor RSS16-I2-D-CC with locking, suitable for series wiring, connection terminal or plug connection, with repeated individual coding with RFID technology, tamper-proof RFID technology based on requirements.
...
|
|
Schmersal safety sensor CSS15-30-2P+D-M-L
Introduction: Schmersal safety sensor CSS15-30-2P+D-M-L metal housing, high repeatability switch contacts, up to 16 sensor switches connected in series, with short circuit detection, wire break, safety cable external voltage monitoring, up to the control box.
...
|
|
SCHMERSAL safety lock AZM201Z-I1-ST2-T-1P2PW
Introduction: SCHMERSAL Safety Lock AZM201Z-I1-ST2-T-1P2PW
Features:
Individually coded with RFID technology
Power on to unlock
Lock monitoring
Thermoplastic housing
The maximum length of the sensor chain is 200 m
31 series sensors ...
|
|
Schmersal / SCHMERSAL controller PSC1-C-10-SDM2-FB1-PNPS
Introduction: The Schmersal safety controller PSC1-C-10-SDM2-FB1-PNPS has 2 signal outputs, 2 safety relay contacts, 4 safe 2 A pp switching semiconductor outputs, and 14 safety inputs on the base module.
...
|
|
The Schmersal safety controller PSC1-C-10-FB1 weighs 580g
Introduction: The Schmersal safety controller PSC1-C-10-FB1 has 2 signal outputs, 2 safety relay contacts, 4 safe 2 amp switching semiconductor outputs, and 14 safety inputs on the base module.
Give birth...
|
|
The Schmersal / SCHMERSAL output expansion module SRB402EM frequency 60 Hz
Description: The SCHMERSAL output expansion module SRB402EM housing material in glass-fibre reinforced thermoplastic with ventilation, with 2 auxiliary contacts, signal output, contact expansion module with 4 safety contacts, STOP 0
...
|
|
Schmersal / SCHMERSAL controller PSC1-C-10-MC semiconductor output
Introduction: The Schmersal safety controller PSC1-C-10-MC has 2 signal outputs, 2 safety relay contacts, 4 safe 2 A pp switching semiconductor outputs, and 14 safety inputs on the basic module.
Give birth...
|
|
The Schmersal controller PSC1-C-100-MC has a width of 112.5 mm
Introduction: The Schmersal safety controller PSC1-C-100-MC has 6 signal outputs, 2 safety relay contacts, and 4 safe 2 A pp switching semiconductor outputs that can be switched to 2 safe p-/n-switching semiconductor outputs.
...
|
|
Schmersal controller PSC1-C-100-FB1 depth 115mm
Introduction: The Schmersal safety controller PSC1-C-100-FB1 has 6 signal outputs, 2 safety relay contacts, 4 safe 2 A pp switching semiconductor outputs, and can be switched to 2 safety p-/n-switching semiconductor inputs.
...
|
|
Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 200CC-T-1P2P working current 50mA
Introduction: Germany Schmersal / SCHMERSAL electromagnetic safety lock AZM 200CC-T-1P2P
Features:
Lock monitoring
Thermoplastic housing
Electronic non-contact, coding system
The maximum length of the sensor chain is 200 m
31. Self-monitoring of series sensors
...
|
|
SCHMERSAL limit switch PS116-T11-LR200-K200 has a minimum operating force of 7.5 N
Introduction: SCHMERSAL limit switch PS116-T11-LR200-K200
Features:
Belt line right, 2 m
Slow-acting 1 NO (NO) / 1 Open (NC)
Thermoplastic housing
Symmetrical shell
Degree of protection IP66, IP67
...
|
|
Contact
working hours
