Casper/casappa Twin Rotary Motor PHM20.16R0-07E2-LGD/GD-N-EL-D-VNR01

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pump Boda [LVP] series is suitable for medium and high pressure open circuits. Features: energy conservation Low noise Short response time It can be equipped with bearings, and can bear ...

CASAPPA gear pump PLP20.14D0-82E2-/EA-N-FL Displacement: 14cc/rev PRESSURE: 250BAR Installation: Rectangular flange at the motor connection end It can completely replace the gear pumps of Italy brands such as Matsucchi, Gotek, Dakinsa Odendos, Vivor, Roots, etc More Models ...

Introduction: The swash plate design of Casper/casappa TVP series variable axial piston pumps is ideally adapted to the application of open hydraulic systems in trucks. This compact design allows it to be mounted directly on the PTO. Features: ...

The 6 motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can make the 6 actuators in the hydraulic system work synchronously. Displacement: 4cm/rev Rated pressure: 250 bar Speed range: 6 channels synchronized CASAPPA synchronous motor PLD is divided into PLD10 and PLD20 ...

CASAPPA Hydraulic Shunt Motor PLD10/3/CS-GD/4-GC/4-GC/4-GC/VPEF120 Technical Parameters: Displacement: 4cc/rev Rated pressure: 250 bar Relief valve pressure: 120 bar Mounting port size: inlet G1/2", degreaser G3/8" We are customer-centric ...

casappa gear pump PLP10.2-D0-81E1-LBB/BA-N-EL FS Displacement: 2cc/rev PRESSURE: 280BAR Installation: Rectangular flange at the motor connection end It can completely replace the gear pumps of Italy brands such as Matsucchi, Gotek, Dakinsa Odendos, Vivor, Roots, etc CASAPPA ...

Cast Iron Gear Pump & Gear Motor KAPPA Compact Series KP30.41-05S6-LMF/OD-BSL/30.24-BSH/OB/OC/X-N-LN-80E-D Twin pump combination: front pump displacement 41cc; The tail pump has a displacement of 24cc Two-stage cast iron gear pump and gear motor. Casappa Gear Pump Compact ...

Product introduction: Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, which is high-strength aluminum alloy. A variety of international standard shafts, flanges and ports are available (including SAE, DIN, EUROPEAN and other standards), which can be used in a wide range of applications. Displacements range from 0.07 in³/rev (1, ...

The gear pump and motor are made of cast iron and are divided into three parts. Extremely versatile and reliable design, also suitable for the most extreme operating conditions. Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) are available for 30 and 35 ...

Casper IKRON products, including suction filters, return hydraulic filters, spin filters, medium and high pressure filters, manual hydraulic pumps, accessories, integrated plastic hydraulic oil tanks, portable filtration units. The KRON HF410 suction filter is installed directly on the suction line of the hydraulic pump, ...

The two motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can make the two actuators in the hydraulic system work synchronously. Displacement: 8ml/rev, pressure: 230 bar Synchronization error 1,5% - 2,5% CASAPPA synchronous motor PLD is divided into PLD10 and PLD20 specifications, ...

Casper CASAPPA Hydraulic Gear Motor PLM20.11, 2R0-82E2-LGD/GD-N-EL This model is a unidirectional right-hand gear motor with a displacement of 11.2 cc/rev and a bevel shaft end in the mounting shaft Our customer-centric service concept: the pursuit of a full range of services is a kind of high-quality, ...

KAPPA Compact Series Duplex Pump KP30.22-ABK9-LMD/MB-KSL/GS/30.22 The front pump has a displacement of 22cc/rev and the tail pump has a displacement of 22cc/rev Two-stage cast iron gear pump and gear motor. The compact structure of the Casappa gear pump allows it to integrate many functions in a limited space.

Casper Gear Pump Geared Motor PLM30-27S0-33S5-LOD Product Type: Single-phase series motor Number of poles: 2 poles Rated power: 3000W Rated voltage: 220V Rated speed: 3600rpm Our customer-centric service concept: a full range of services to pursue ...

Drive mode: magnetic Number of impellers: Multi-stage Pump shaft position: side vertical Flow: 35 Weight: 35kg Specifications: General Main downstream platforms: wish Usage: Chemical pump Our customer-centric service concept: a full range of services are pursued as a high...

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pumps MVP-MVPD Series This compact design allows for direct mounting on the engine. The new "MVPD" series has a higher flow rate than conventional pumps of the same size, allowing for higher rotational rates without compromising the hydraulic system design.

The synchronous motor displacement is; 31.5cc/rev Working pressure: 200 bar Motor structure: 2 gear type aluminum alloy synchronous motor, oil port is two inlets, two outlets, two relief valves The port sizes are: G3/4 inch thread for the inlet port G1/2 inch thread for the working port, ...

CASAPPA synchronous motor PLD20/4/CS-GE/14-GD/14-GD/14-GD//14-GD/VPEF190, abbreviated model PLD20/4/CS-GE/14-GD/*4-VPEF190 The 2 motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can synchronize the 2 actuators in the hydraulic system.

CASAPPA Cast Iron Hydraulic Shunt Motor HDD35.125-ME+C3030-MF+125-MC-E Technical Parameters: Displacement: 124,8cc/rev Rated pressure: 310 bar Peak pressure bar: 335 RPM * Large * Small: 3000 500 Relief valve pressure: Relief valve pressure can be customized according to needs.

CASAPPA Hydraulic Shunt Motor|Synchronous Motor Model: PLD20/2/CS-GE/31,5-GD/31,5-GD/VPEF160 Technical Parameters: Displacement: 31,5cc/rev Technical Parameters: Displacement: 14,4cc/rev Rated pressure: 250 bar Relief valve pressure: 206 bar Synchronous ...