Casper/casappa Gear Pump PLP20.14D0-82E2-/EA-N-EL

Casper Gear Pump Geared Motor PLM30-27S0-33S5-LOD Product Type: Single-phase series motor Number of poles: 2 poles Rated power: 3000W Rated voltage: 220V Rated speed: 3600rpm Our customer-centric service concept: a full range of services to pursue ...

Casappa gear pump PLP10.3, 15 D0-86E7-LBB/BA-N-EL Gear pump displacement: 3,15 cc/rev Rated pressure: 250 bar Peak pressure: 270 bar Pump type: Gear pump, designed for lubrication systems or small power packs Mounting shaft: taper shaft Port form: German standard ...

CASAPPA Cast Iron Hydraulic Shunt Motor HDD35.125-ME+C3030-MF+125-MC-E Technical Parameters: Displacement: 124,8cc/rev Rated pressure: 310 bar Peak pressure bar: 335 RPM * Large * Small: 3000 500 Relief valve pressure: Relief valve pressure can be customized according to needs.

CASAPPA Hydraulic Split Motor PLD10/3/CS-GD/6,3-GC/6,3-GC/6,3-GC Technical Parameters: Displacement: 6.3cc/rev Rated pressure: 250 bar Relief valve pressure: optional Mounting port size: inlet G1/2", degreaser G3/8" Our customer-centric ...

casappa Hydraulic Gear Motor PLM10.5RO Fan Hydraulic Motor can be used in a variety of cooling systems, in wind turbine hydraulic systems, and in applications where high speeds are required. Motor displacement: 5cc/rev Maximum speed: 4000rpm Our customer-centric approach ...

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pumps MVP-MVPD Series This compact design allows for direct mounting on the engine. The new "MVPD" series has a higher flow rate than conventional pumps of the same size, allowing for higher rotational rates without compromising the hydraulic system design.

Italy Casappa synchronous shunt motor, PLD20.16-**/GD-N-C combo 4-channel synchronous PLD20/4/CS-GE/16-GD/16-GD/16-GD/16-GD/16-GD Material: Aluminum alloy STRUCTURE: GEAR TYPE, 1 IN 4 OUT, RATED FLOW 100L/MIN PEAK FLOW 120L/MIN

Casper CASAPPA Hydraulic Gear Motor PLM20.11, 2R0-82E2-LGD/GD-N-EL This model is a unidirectional right-hand gear motor with a displacement of 11.2 cc/rev and a bevel shaft end in the mounting shaft Our customer-centric service concept: the pursuit of a full range of services is a kind of high-quality, ...

Technical Parameters: Displacement: 11,2 cc/rev Rated pressure: 250 bar Relief Valve Pressure:- Number of synchronous connections: 2-8 can be combined at any time Mounting port size: inlet G3/4", degreaser G1/2" Our customer-centric service concept: a full range of services are pursued ...

CASAPPA Hydraulic Shunt Motor PLD20/2/CS-GE/20-GD/20-GD/VPEF120 Technical Parameters: Displacement: 31,5cc/rev Rated pressure: 250 bar Relief valve pressure: 120 bar Number of synchronization connections: 2 connections Mounting port size: inlet G3/4", degreaser G1/2" ...

KAPPA Compact Series Duplex Pump KP30.22-ABK9-LMD/MB-KSL/GS/30.22 The front pump has a displacement of 22cc/rev and the tail pump has a displacement of 22cc/rev Two-stage cast iron gear pump and gear motor. The compact structure of the Casappa gear pump allows it to integrate many functions in a limited space.

Drive mode: magnetic Number of impellers: Multi-stage Pump shaft position: side vertical Flow: 35 Weight: 35kg Specifications: General Main downstream platforms: wish Usage: Chemical pump Our customer-centric service concept: a full range of services are pursued as a high...

Casappa Hydraulic Gear Motor PLM20.14D0-50S1-LOC/OD-N-EL This model is a one-way right-hand gear motor with a displacement of 14cc/rev and a splined shaft end in the mounting shaft Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-...

High efficiency Built-in shaft end support bearings for heavy-duty applications Multi-connected pumps can be imported together, and pumps of different series and different displacements can be cascaded Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, high-strength aluminum alloy, a variety of standard shafts, flanges and ports are optional (including ...

Introduction: Casper/Casappa Polaris Gear Pump The gear pump and electric motor are made of cast iron and are divided into three parts. THE NEW GEAR PUMP AND MOTOR "PH" SERIES IS A DEVELOPMENT OF THE "POLARIS" SERIES "POLARIS PH" WITH A NEW BODY MADE OF CAST IRON WITH HIGHER OPERATING PARAMETERS ...

Displacements range from 0.50 in3/rev (8,26 cm3/rev) to 2.01 in3/rev (33,03 cm3/rev). Peak pressure: 4350 psi (300 bar). Rotational speed: 3500 min-1 High operating pressures can also be maintained at high displacements Long service life Low noise High temperature...

Casper CASAPPA Hydraulic Gear Motor PLM20.25R5-48WC-L* This model is a one-way right-hand gear motor with a displacement of 14cc/rev and a splined shaft end in the mounting shaft Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service...

Duplex pump, head pump displacement 14.5cc tail pump displacement 11,2cc The piston pumps of the LVP series are available in displacements from 7,8 cm³/rev to 30 cm³/rev Peak pressure: 350 bar Peak speed: 2600rpm Our customer-centric service concept: a full range of services are pursued a...

Product introduction: Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, which is high-strength aluminum alloy. A variety of international standard shafts, flanges and ports are available (including SAE, DIN, EUROPEAN and other standards), which can be used in a wide range of applications. Displacements range from 0.07 in³/rev (1, ...

Type Gear pump Brand Casappa Model LVP48D-69Z1-LME/QC-N-LS0 Material: Cast aluminum Drive mode: Electric Performance: Wear-resistant Usage: Metering pumps Conveying medium oil pump Pump shaft position side vertical Number of impellers Multi-stage Flow rate 14 (m3/h) Yang...