Casappa Gear Motor PLM20.11, 2R0-82E2-LGD/GD-N-EL

CASAPPA Hydraulic Shunt Motor|Synchronous Motor Model: PLD20/2/CS-GE/31,5-GD/31,5-GD/VPEF160 Technical Parameters: Displacement: 31,5cc/rev Technical Parameters: Displacement: 14,4cc/rev Rated pressure: 250 bar Relief valve pressure: 206 bar Synchronous ...

Drive mode: magnetic Number of impellers: Multi-stage Pump shaft position: side vertical Flow: 35 Weight: 35kg Specifications: General Main downstream platforms: wish Usage: Chemical pump Our customer-centric service concept: a full range of services are pursued as a high...

Casappa gear pump PLP10.3, 15 D0-86E7-LBB/BA-N-EL Gear pump displacement: 3,15 cc/rev Rated pressure: 250 bar Peak pressure: 270 bar Pump type: Gear pump, designed for lubrication systems or small power packs Mounting shaft: taper shaft Port form: German standard ...

High efficiency Built-in shaft end support bearings for heavy-duty applications Multi-connected pumps can be imported together, and pumps of different series and different displacements can be cascaded Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, high-strength aluminum alloy, a variety of standard shafts, flanges and ports are optional (including ...

Introduction: Casper/casappa Whisper [WS] hydraulic gear pump is divided into three parts and extruded with high-strength aluminum alloy. WHISPER is a new original technology protected by international patents that has been applied to a range of low-noise external gear pumps and motors. Complies with all international standards (...)

Product introduction: Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, which is high-strength aluminum alloy. A variety of international standard shafts, flanges and ports are available (including SAE, DIN, EUROPEAN and other standards), which can be used in a wide range of applications. Displacements range from 0.07 in³/rev (1, ...

CASAPPA Hydraulic Split Motor PLD10/3/CS-GD/6,3-GC/6,3-GC/6,3-GC Technical Parameters: Displacement: 6.3cc/rev Rated pressure: 250 bar Relief valve pressure: optional Mounting port size: inlet G1/2", degreaser G3/8" Our customer-centric ...

The 4 motors work synchronously, and the same flow rate and the same pressure of hydraulic oil can make the 4 actuators in the hydraulic system work synchronously. Displacement: 11,2 cc/rev, optionally with or without relief valve, set pressure between 50 and 230 bar Synchronization error 1,5% - 2, ...

Italy Casappa synchronous shunt motor, PLD20.16-**/GD-N-C combo 4-channel synchronous PLD20/4/CS-GE/16-GD/16-GD/16-GD/16-GD/16-GD Material: Aluminum alloy STRUCTURE: GEAR TYPE, 1 IN 4 OUT, RATED FLOW 100L/MIN PEAK FLOW 120L/MIN

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pump Boda [LVP] series is suitable for medium and high pressure open circuits. Features: energy conservation Low noise Short response time It can be equipped with bearings, and can bear ...

Casappa Hydraulic Gear Motor PLM20.14D0-50S1-LOC/OD-N-EL This model is a one-way right-hand gear motor with a displacement of 14cc/rev and a splined shaft end in the mounting shaft Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-...

Model: CASAPPA hydraulic shunt motor PLD10/4/CS-GD/2-GC/2-GC/2-GC/2-GC Technical Parameters: Displacement: 2cc/rev Rated pressure: 250 bar Number of streams: 6 streams are synchronized Mounting port size: inlet G1/2", degreaser G3/8" Our customer-centric ...

CASAPPA Gear Pump PLP20.25S0-31S1-LGE/GD-N-EL Displacement: 14,4cc/rev PRESSURE: 250BAR Rotation : Left rotation Installation: Rectangular flange at the motor connection end It can completely replace Italy brands such as Mazucchi, Gotek, Grande Kinsa, Odendevers, Wivor, Roots, etc.

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pumps MVP-MVPD Series This compact design allows for direct mounting on the engine. The new "MVPD" series has a higher flow rate than conventional pumps of the same size, allowing for higher rotational rates without compromising the hydraulic system design.

CASAPPA synchronous motor PLD20/4/CS-GE/14-GD/14-GD/14-GD//14-GD/VPEF190, abbreviated model PLD20/4/CS-GE/14-GD/*4-VPEF190 The 2 motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can synchronize the 2 actuators in the hydraulic system.

CASAPPA Filter, Hydraulic Filter, Filter Element: HF745-30.223-AS-FG010-LC-B60 Rotary in-line oil filter It is designed for use in the suction circuit or return circuit of the hydraulic system to protect the components in the hydraulic series from contaminants. HF620-625 series Filter Replacement ...

Introduction: Casper/Casappa Polaris Hydraulic Gear Pumps use 3D computer-aided design, which allows us to insert components into hydraulic circuits using 3D modeling and virtual simulation. This means that this approach can invest less time in manufacturing a better quality product. Polaris Pump ...

casappa Hydraulic Gear Motor PLM10.5RO Fan Hydraulic Motor can be used in a variety of cooling systems, in wind turbine hydraulic systems, and in applications where high speeds are required. Motor displacement: 5cc/rev Maximum speed: 4000rpm Our customer-centric approach ...

CASAPPA gear pump PLP20.11, 2D0-82E2-/EA-N-EL FS Displacement: 11.2cc/rev PRESSURE: 250BAR Installation: Rectangular flange at the motor connection end It can completely replace the gear pumps of Italy brands such as Matsucchi, Gotek, Dakinsa Odendos, Vivor, Roots, etc More...

KAPPA Compact Series Duplex Pump KP30.22-ABK9-LMD/MB-KSL/GS/30.22 The front pump has a displacement of 22cc/rev and the tail pump has a displacement of 22cc/rev Two-stage cast iron gear pump and gear motor. The compact structure of the Casappa gear pump allows it to integrate many functions in a limited space.