The Fluke 710 Valve Tester is designed to make it quick and easy for users to test HART Smart Control Valves. The 710 features built-in test procedures and an intuitive user interface that allows users to test valves quickly and easily, while valve test quick check results provide at-a-glance diagnostics to help you make maintenance decisions faster than ever before. The results of the quick valve condition check let the user know if the valve is in good, critical, or poor operating condition, so you can quickly decide if additional maintenance is required.
The valve tester is equipped with valve testing and HART communication capabilities
With the 710 Valve Tester's built-in HART communication, the user can output a 4-20 mA signal to move the smart control valve and interpret the valve's HART feedback to determine if the valve is moving to the desired position. In addition to the position information, the measured pressure output by the I/P inside the valve (for moving the valve) can also be determined via the HART communication protocol.
The 710 has a built-in test process that automatically increases and changes the mA signal, while monitoring the HART position and pressure feedback from the control valve, giving you a complete picture of the valve's overall condition at the touch of a button.
Pre-configured valve tests for at-a-glance diagnostic results
The 710's built-in valve test program includes:
manual testing; Manually change the mA signal and view HART position and pressure parameter information
Full-scale ramp characteristics of the mA signal (4-20-4 mA) while recording the pressure applied at 0-100-0% position, or moving the valve from 0-100-0%.
Step the mA signal at the input to the valve and evaluate the valve's response to changes in the mA input
A speed test determines how quickly a valve opens or closes
Crash and partial-stroke tests help to test valves over a portion of the range for real-world testing
ValveTrack™ software enables further analysis and trend forecasting
Valve test data can be recorded and saved to the 710's memory or uploaded to the included ValveTrack™ analysis software.
With ValveTrack™ software, you can:
Upload, print and plot recorded valve test data (on-site acquisition).
Compare previously uploaded test data with the most recent test data
View valve test history data via HART tag ID
Export valve test data to CSV for supplemental analysis in Microsoft Excel®
Save time and solve problems
In addition, the 710 features:
HART data is recorded in the field. Once the 710 field records data, ValveTrack™ software can upload HART configurations for up to 20 HART devices in your facility, with the ability to use the 710 field with the ability to use the data in (. csv) or (csv). txt) format.
The mA loop measurements and HART data in the data log can come from a specific transmitter and can be used for troubleshooting and adjusting the loop. The data log has selectable acquisition intervals of 1 to 60 seconds and can record 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process parameters.
Product Highlights:
The valve testing process evaluates control valves for good, critical, or bad condition
Generic HART communication
mA accuracy, 0.01% of measured or output
Compact, durable design
Intuitive user interface, quick knobs for quick setup, easy to use
24 V DC loop power supply with mA measurement mode (-25% - 125%)
The current range resolution is up to 1 μA and the voltage range is up to 1 mV
Built-in 250 Ω selectable resistor for HART communication
All measurements are made with a simple two-wire connection
Automatic power off to extend battery life
Variable step and ramp times in seconds.
Key features:
Key valve testing capabilities include preconfigured valve characterization, speed, step, manual, and crash and part-stroke testing
Key valve tester functions include mA source, mA analog, mA read, mA read/loop power, and voltage read
ValveTrack™ software can be uploaded to a PC for further in-depth analysis of valve measurement data recorded and saved to the 710 memory
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the Fluke/Fluke 710 Valve Tester products, if you are interested in Fluke/Fluke products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Fluke/Fluke Networks MicroScanner™ PoE Cable Tester
MicroScanner™ PoE takes the frustration out of PoE installation by providing quick and easy PoE verification.
The tester detects the available PoE rating (0-8) according to the latest PoE standards and displays the voltage of the passive PoE power supply. What a cable technician needs ...
|
|
Fluke Pack30 Professional Tools Backpack
Backpacks make it easy to organize, store and carry your tools. Having all the tools you need in one Fluke Pack30 backpack means you don't have to constantly go back to get your tools. Moreover, the traditional tool belt will put all the weight on your lower back, and a ...
|
|
Fluke T5-600 Voltage Current Off Tester | Voltage fluctuation test
The T5-600 Voltage Current Break Tester is a versatile troubleshooting and troubleshooting tool for environments up to 600 V. Compact, compact tool that can be used to check voltage, on/off, and current. Simply select the voltage, resistance or current, and the tester will do the rest.
|
|
Fluke/FLUKE 1621 Earth Resistance Tester
The Fluke 1621 is an easy-to-use grounding tester. For ground resistance testing applications, the 1621 is the first line of defense for detecting reliable ground connections. The device adopts a variety of basic grounding test methods, including the three-pole voltage drop test method and the two-pole grounding resistance test method.
|
|
FLUKE VPS421-B Oscilloscope Test Probe (Blue)
Fluke VPS420-R Oscilloscope Test Probe Set, Red/Black, 100:1
Key features:
Color: Red test lead probe, black ground clip
Main functions: connect oscilloscopes, etc
Voltage conversion ratio: 100:1
Large test bandwidth: 150MHz
Operating voltage (probe tip and parameter)
|
|
Fluke/Fluke 725S Multifunction Process Calibrator
The Fluke 725S Multifunction Process Calibrator is a powerful, easy-to-use field access, calibration, and maintenance tool that can be used to test and calibrate virtually any process parameter using its measurement or output capabilities.
Chinese LCD backlight display, easy to operate
Measurement of volts, milliamps, platinum resistance (RTD...)
|
|
Fluke/FLUKE Multi-Metering Furnace 9142-X
A new generation of multifunctional on-site metering furnaces – bringing the temperature metrology laboratory to the site
After the introduction of the innovative high-precision dry metering furnace 917X series that can be used in the field, Fluke has successfully developed the multi-functional dry metering furnace 914X series with more functions and easier to use.
|
|
Fluke/Fluke insulated pump clamps
Fluke's quick-adjustment insulated carp pliers or water pump pliers have a higher grip and are more comfortable than conventional pump pliers of the same length. Compared to other designs, the 27 jaw adjustment steps allow for more accurate clamping of the workpiece and is less prone to slipping. The slender head and fitting section allow for easy clamping of these pump clamps ...
|
|
Fluke/Fluke 15B+ Economy Digital Multimeter 600V
Brief: Fluke/Fluke 15B+ Digital Multimeter 600 V Cat III Safety Design Indicators, the Fluke 15B+ is easy to use, requires only one hand to operate, and has the flexibility to operate even with gloves on to meet all your needs.
...
|
|
Fluke 63 Infrared Thermometer High Accuracy 1 %
Description: The Fluke 63 infrared thermometer can be used to measure temperatures at hard-to-reach, hot, rotating, or other dangerous targets, with accurate measurements in temperatures ranging from -32°C to 535°C (-25°F to 999°F).
...
|
|
FLUKE/FLUKE 902 FC TRUE RMS HVAC CLAMP METER
The Fluke 902 FC True RMS HVAC Clamp Meter enables HVAC technicians to create reports and collaborate with colleagues on the job site.
The Fluke 902 FC True RMS HVAC Clamp Meter is a wireless Fluke Connect compatible clamp meter that improves HVAC technician field ...
|
|
Fluke/Fluke MultiFiber Pro Optical Power Meter
The MultiFiber Pro Optical Power Meter and Source is the only fiber tester that can test MPO fiber trunks without the use of fan jumpers. This singlemode and multimode MPO fiber testing tool takes the complexity out of the equation and makes MPO cartridges more tolerant.
|
|
Fluke Mini Infrared Thermometer FLUKE-59
The FLUKE 59 infrared spot pyrometer provides accurate temperature measurement within reach
The FLUKE 59 is a powerful tool to assist electrical engineers in daily electrical maintenance and commissioning and installation work. It provides a quick and easy way to quickly and accurately detect the surface temperature of an object, and its compact design allows users to ...
|
|
Fluke C345 Soft Carrying Case
The perfect carrying case for shipping a wide range of Fluke handheld test tools and accessories
The movable internal isolator can be flexibly adapted to a wide range of oddly sized objects, such as test meters and ammeters
The size is large enough to hold all accessories and instrument books
Exterior pockets, exterior zippered pockets and ...
|
|
Fluke CXT170 Deluxe Bag
Durable, waterproof, sealed, dustproof, chemical-resistant, and corrosion-resistant.
The excellent buoyancy allows the carrying case to float on a saltwater surface with a load of 3.6 kg (7.94 lb).
Equipped with an automatic air release valve, it can quickly achieve air pressure leveling inside and outside the carrying case when the atmospheric pressure changes.
|
|
Fluke/Fluke TiX1000 thermal imaging camera
With the 32x shooting digital zoom, you can still take a close-up photo when inspecting from a safe distance.
Choose a convenient image transfer protocol for your application: Camera data port: Image transfer: SD card, USB 2.0, video output DVI-D (HDMI). GigE vision and RS232 ...
|
|
Fluke/Fluke 5000 power analyzer
Fluke Norma 5000 Power Detection Analyzer/Power Meter: The Fluke Norma 5000 six-phase power analyzer offers the highest bandwidth in its class on the market, making it an ideal test and analysis tool for drive and lighting development. Features include: 3 – 6 power modules, ...
|
|
Fluke/FLUKE-LDR (red) and FLUKE-LDG (green) laser line detectors
Laser line detector for use in bright light environments
Visual audio indicator for ease of use
Rugged design that can withstand rough handling on the job site; Passed a 1-meter drop test
Compatible with Fluke 180LR (Fluke LDR) or Fluke 180LG (Fluke LDG)
Include...
|
|
FLUKE 324 True RMS Clamp Meter
Go to work with durable tools
Flow Cloning relaunches the new F1uke320 series true
RMS Clamp Table.
Continuing a tradition of excellence.
For many years, Fluke has been known for producing the world's most reliable,
The sturdy clamp watch is known all over the world. The new F1uke320 series is no exception. They
Precise, firm ...
|
|
Fluke/Fluke Networks LinkIQ™ Industrial Ethernet Cable/Network Tester
LinkIQ™ measures cables up to 1000 ft (305 m) in length and provides distance to points of failure such as open, short, and unterminated cables.
The included MS-IE remote adapter finds wiring errors and splits on RJ45, M12X, M12D, and M8D terminated cables.
|
|
Contact
working hours
