Mini Slim Permeable M8 Connector Type 1.2m PR-M51C3PL
specification
| Model | PR-M51C3PL*1 | | type | permeance | | output | PNP | | shape | Compact and slender | | Connection patterns | M8 connector 3-pin | | Detection distance | 1.2 m | | Control the number of outputs | 1 | | Output actions | Output 1 | ― | | Output 2 | ON when light is in | | Response time | Output 1 | ― | | Output 2 | ON → OFF：2.7 ms、OFF → ON：0. 5ms | | Sensitivity adjustment | N/A | | Spot diameter | ― | | light source | 4 elements, point light, red LED (650 nm) | | Prevent mutual interference function | ― | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | 1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including pulsation (P-P) 10 % | | Current consumption | Transmitter: 11 mA, receiver: 16 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 26 g |
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) PR-M51C3PL has an ON output (output 2) when light is entered. (The response time is also the response time of output 2)
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-M51C3PL products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-B03
Mini slim metal parts are installed as standard
Type: Small, slender standard mounting bracket
Number of Builts: 1pcs
Material: SUS316L
Remarks: Comes with M3 screw×2, plate nut
Weight: approx. 8 g
This article introduces the KEYENCE/KEYENCE subminiature amplifier built-in photoelectric transmitter ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A20
Sensor head-controller cable 20m CB-A20
Length: 20 m
Weight: approx. 1,400 g
This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A20 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100C (Detection Distance: 100mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100C (Detection Distance: 100mm) Laser Sensor Standard M8 Connector Type
specification
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Select ...
|
|
KEYENCE/KEYENCE LR-X50 laser sensor
Introduction: KEYENCE/KEYENCE Laser Sensor LR-X50 Ultra-Compact Laser Sensor 90g 0.5mm
It can be installed in a variety of places:
Although it is a laser sensor, it can be ultra-small × 9.427×17mm. Can be installed in very tight spaces. Can be cut for ...
|
|
LR-T series LR-TB2000C TOF laser sensor with built-in KEYENCE/KEYENCE amplifier
Detection distance: 2m M12 connector cable type Laser classification 2
specification
*1 Can be displayed from 50 to 2200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15CP
Mini Slim BGS Reflective M8 Connector Type 15mm PR-MB15CP
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB15CP products, if you are interested in KEYENCE/KEYENCE products, please also contact our ...
|
|
KEYENCE/KEYENCE P-M/F Series P-MB15C3PL PHOTOELECTRIC SENSOR WITH BUILT-IN ULTRA-COMPACT AMPLIFIER
Mini Slim BGS Reflective M8 Connector Type 15mm PR-MB15C3PL
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) P ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB90CB
Threaded reflective type M12 connector type 90mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. In addition, when "-99" is exceeded, the display will change to "-FF".
*2 The FDA's (CDRH) laser classification is based on ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH500N NPN Output Cable Exit Type (2m)
Reflective sensor with through-beam stability. It is not affected by the surface color, material, inclination, etc. of the workpiece. 316L stainless steel body shell, protection grade IP68/69K, can be used in various occasions.
Launched high-power type
Reflective type using traditional* light intensity detection ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1500
Amplifier unit Panel mount IL-1500
Pollution level: 2
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH (non-condensing)
Shock resistance: 10 to 55 Hz, double amplitude 1.5 mm, 2 each in X, Y, Z ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S025
keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S025
Base distance: 25 mm
Measuring distance: 20 to 30 mm
Enclosure rating: IP67
Pollution level: 3
Ambient light: Incandescent lamp: 10,000lux*5
Ambient temperature: -1 ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-73865
Connector cable M8 straight 10m PVC
specification
This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F series OP-73865 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1050
keyence KEYENCE CMOS Laser Displacement Sensor Amplifier Unit DIN Rail Mount Type IL-1050
Power supply voltage: Supplied by the main module*3
Power consumption: 2000 mW or less (67 mA or less at 30 V)
Pollution level: 2
Ambient temperature: -10 to +50 °C ( ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906
I/O cable 3m
Type: I/O cable
Length: 3 m
Weight: approx. 230 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your ...
|
|
KEYENCE/KEYENCE photoelectric sensor PZ-M series control output 100mA
Introduction: KEYENCE's stand-alone photoelectric sensor PZ-V/M series uses a laser sensor with distance principle detection, which is not easily affected by the color and tilt of the workpiece, and performs stable detection. Unaffected by highly reflective target backgrounds, it is highly resistant to dust and dirt.
...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51CN
KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51CN Flat Permeable Type M8 Connector Type 0.6m
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-F51CN products.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1550
Amplifier unit Panel mount type IL-1550
Power supply voltage: Supplied by the main module*3
Power consumption: 2200mW or less (74mA or less at 30V)
Environmental resistance
Pollution level: 2
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relatively wet ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87410
Securely mount metal parts
Material: SUS316L
Note: When installing the connector type, it can only be used in combination with L-shaped connector cables.
Weight: approx. 170 g
In this article, we introduce the KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series OP-87410 ...
|
|
KEYENCE/KEYENCE CCD laser displacement sensor LK-G3000 series all-in-one type
Introduction: There are 6 sensor heads to choose from, which can be used with new algorithms and 2 types of optical systems.
peculiarity
Sampling speed: 50kHz
High accuracy: ±0.02% (LK-G10/15)
Ultra-high repeatability: 0.01 μm
Multi-function controller
...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51C3PD
Mini Slim Permeable Type M8 Connector Type 1.2m
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".
Example) PR-M51C3PL ...
|
|
Contact
working hours
