Xinshida/STEP servo motor 40E rated speed 3000rpm

Introduction: Xinshida/STEP servo motor 60ST 　　Product parameters Power range: 200W-600W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.2A——3.5A Rated speed: 3000rpm ...

Introduction: Xinshida/STEP servo motor 150ST 　　Product parameters Power range: 3.0kW - 5.5kW Input voltage: 220V Rated line current: 14A-27A Rated speed: 2000PRM-2500RPM Rated torque: 15N ...

Introduction: Xinshida/STEP servo motor 40S3S, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 50W——100W Input voltage: 220VAC (-15-+10%), 50-60Hz Rated torque: ...

Introduction: Xinshida/STEP servo motor 60B series, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated...

Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9. ...

Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...

Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6 Features: Self-tuning, free debugging, saving 90% of equipment debugging time; Speed loop bandwidth: 3.5kHz; Current loop refresh rate 1MHz; Three 16-bit analog command inputs can ...

Introduction: Xinshida/STEP servo motor 130ST Product parameters Power range: 1.3kW - 2.4kW Input voltage: 220VAC (-15-+10%), 50-60Hz Rated current: 7.0A——12A Rated torque: 4.2N.m— ...

Introduction: Xinshida/STEP universal bus servo Ωs-AP1 can cover servo motors with a power of 0.2kW - 7.7kW. Pulse control, up to 4MPulse/s high-speed pulse input interface (differential signal), up to 500KPulse/s low-speed pulse input interface (optocoupler circuit); ...

Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.

Introduction: Xinshida/STEP universal bus servo Ωs-EN2, Ωs-EN1 series servo drive can cover servo motors with a power of 2kW-22kW. Support EtherCAT bus communication, communication rate 100Mbps; It can realize precise position, speed, torque control, and has excellent control ...

Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...

Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit. Give birth...

Introduction: Xinshida/STEP servo motor 40ST Product parameters Power range: 50W-100W Quota line voltage: DC 48V/AC 220V Rated line current: 48V 1.1A-2.5A / 220V 0.4A-0.6A Rated speed: 300 ...

Introduction: The ADT-8960 is one of the members of the 12-axis motion control card based on the computer PCI bus, one system can support up to 16 control cards, can control 96 servo/stepper motors, plug and play. Mainly used in multi-axis ...

Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 0.4kW - 1.2kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2. ...

Introduction: Xinshida/STEP servo motor 130S3H, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 1.3kW - 2.3kW Rated voltage: 220VAC (-15-+10%), 50-60Hz Rated torque: ...

Introduction: Xinshida/STEP universal pulse servo KAS series Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can be set ...

Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...

Introduction: Xinshida/STEP servo motor 110ST servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Power range: 0.88kW - 1.6kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated...