Introduction: Kinco-K6 series PLC is a small PLC product, is a high-performance standard PLC launched by Buke company, using a new technology platform, under the premise of ensuring high performance and high reliability, it provides Ethernet, CAN bus, extended BD board interface and other functions closer to user needs, and has obvious advantages such as faster running speed, larger storage space, and significantly improved functions, which can meet the diverse needs of users.
peculiarity
It is equipped with a 10/100M Ethernet port as standard, supports TCP/UDP and other rich network protocols, and can accommodate up to 16 clients.
Support BD board, expand CAN bus or serial port, etc., more convenient and economical;
The body is equipped with multiple high-speed pulse input and output channels as standard, and can be connected to 14 expansion modules;
It adopts a new MCU platform, which has faster processing speed and supports rich software functions such as arrays and stacks.
parameter
Body switch: 14*DI/10*DO
Ontology Analog: --
Number of BD boards that can be connected to expand: 1
Number of Connectable Expansion Modules: 14
Communication port
Serial
Body: 2*RS485;
BD board: 1*RS232 + 1*RS485
CAN
Ontology: None;
BD plate: 1*CAN
Ehternet ontology: 1*Ethernet
High-speed counter: 4
Single-phase: HSC0 and HSC1: up to 200KHz; HSC2 and HSC3: up to 6KHz
Duplex: HSC0 and HSC1: up to 200KHz; HSC2 and HSC3: up to 2KHz
High-speed output
4
PTO0--PTO2: up to 200KHz
PTO3: up to 10KHz (The load resistance of each channel is not more than 1.5KΩ, otherwise the maximum cannot be reached.)
High output frequency)
The edge is interrupted by 4 paths, which can be set to the rising edge or the falling edge respectively.
Storage area
User program: Up to 8K instructions
User data: 4K bytes in M-zone; 16K bytes in the V zone.
timer
256
1ms time base: 4
10ms timebase: 16
100ms timebase: 236
Counter: 256
Data backup: EEPROM, up to 1K bytes
Data hold: Zone V (16K bytes) + Zone C (counter, 512 bytes). Lithium battery, 3 years at room temperature
other
Timing interrupts: 2, 0.1 ms time base.
Real-time clock: Yes, less than 5 minutes/month at 25°C
DC24V output power supply: 300mA, short circuit protection
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the Kinco/Buke K6 series high-performance standard PLC body: 2*RS485 products, if you are interested in Kinco/Buke PLC, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kinco/Buke HMI dedicated handheld terminal RT070 power: 8W
Introduction: Kinco/Buke HMI dedicated handheld terminal RT070 Power: 8W, input range: DC16V-DC32V, built-in isolated power supply, mobile operation handheld terminal, standard 5 meters cable (10, 15 meters optional).
peculiarity
Basic Specs: 7" TFT, 800×480 pixels
|
|
Kinco MT4513TE HMI Display size: 10.4" TFT
Introduction: Kinco MT4513TE HMI Display size: 10.4" TFT, resolution: 800×600 pixels, touch panel: 4-wire precision resistor network (surface hardness 4H).
parameter
Basic specifications
Display size: 10.4" TFT
Resolution...
|
|
Kinco MT4523TE Human-machine interface Allowable power loss: <5ms
Introduction:Kinco/Buke MT4523TE human-machine interface allows power loss:
|
|
kinco Buke driver 2CM860 Input voltage: 24~70VDC
Features:
It has the function of automatic adaptation of motor parameters, which can automatically generate optimal control parameters for different motors and maximize the performance of the motor;
It has a phase memory function;
It has automatic half-flow function, DIP switch selection;
With a test run function ...
|
|
Kinco G070 128MB DDR3 RAM 7" TFT
Product introduction: Kinco HMI GREEN series built-in isolated power supply enhances reliability, high-brightness LCD better display effect, supports CAN bus, and three serial ports meet diverse needs.
Basic specifications
Display size 7" TFT
...
|
|
Kinco HP series touch screen PLC all-in-one machine Power supply voltage DC 24V
Introduction: Kinco HP series integrates HMI and PLC, which is an economical hybrid product launched by Buke company. Under the premise of ensuring rich functions, high performance and high reliability, the all-in-one machine optimizes the hardware design and has good integration, eliminating the connection between PLC and HMI, and also eliminating the direct connection between the two.
|
|
Kinco HMI GL104E ARM RISC 32Bit 800MHz
Product introduction: Kinco HMI GREEN series 15-inch large screen preferred model; The industrial size is 4:3 for great visual coordination; The structure is sturdy and atmospheric. Built-in isolated power supply enhances reliability, high-brightness LCD better display effect, supports CAN bus, and three serial ports meet diverse needs.
...
|
|
Kinco CV20 series inverter carrier frequency 6kHz
Introduction: Kinco high-performance vector inverter CV20 series inverter carrier frequency 6kHz, output frequency 0-300Hz.
peculiarity
Output frequency 0-300Hz
V/F control and programmable V/F curves
Carrier frequency 6kHz
Automatic torque boost and automatic slip ...
|
|
Kinco K2 series PLC baud rate is 115.2kbps
Product Introduction
The K2 series PLC is an economical product of the K series (some are not scalable), which improves the performance and reduces the cost on the basis of the K5 series, and has a very high cost performance.
Key features:
• Provide USB programming port, and can be debugged by USB power supply, which is convenient ...
|
|
Kinco/Buke SZ7GE HMI dedicated handheld terminal Allowable power loss: <3ms
Introduction:Kinco/Buke SZ7GE HMI dedicated handheld terminal Allowable power loss:
|
|
Buke FMC frameless torque motor FMC057 rated torque 0.32Nm-0.64Nm
Product Introduction
Frameless torque motor is different from the traditional servo motor, there is no casing, only stator and rotor 2 parts, compared with framed motor, frameless motor configuration is flexible, easy to install, focusing on the current drive system high integration trend, it can be said that frameless motor is more ...
|
|
Kinco Buke Servo Motor SMC40S-0005-30M□K-5DSU Voltage: 48V
Features:
New electromagnetic design
The cogging torque is small, the torque ripple is low, and the vibration during the operation of the motor makes the torque output more stable
Short fuselage design
The fuselage structure has been redesigned to shorten the length of the fuselage, save more installation space, and reduce the size of the equipment ...
|
|
Kinco AK800M-48DT Motion Controller 4M program storage space
Introduction:Kinco AK800M-48DT motion controller 4M program storage space, 24 transistor digital output, 1 EtherCAT master, support synchronous positioning, electronic cam, interpolation function.
peculiarity
4M program storage and 8M data storage
...
|
|
Kinco Human-Machine Interface MT4512TE Brightness: 320cd/m²
Introduction: Kinco Human-machine interface MT4512TE Brightness: 320cd/m², dimensions: 310×230×58 (mm), simplified design, more cost-effective.
peculiarity
Display size: 10.1"
Streamlined design and more cost-effective
400MHz RISC CPU, ...
|
|
Kinco HMI GT100E2 Power consumption: 5W@ DC24V
Introduction:Kinco Human-machine interface GT100E2 Power consumption: 5W@ DC24V, withstand voltage performance: 500VAC for 1 minute, motherboard three-proof spraying, strong corrosion resistance in harsh environments; Built-in isolated power supply prevents external interference and enhances reliability.
peculiarity
10.1" HD display, 1677...
|
|
Kinco/Buke HMI F150E displays 16.7M colors
Introduction: Kinco/Buke HMI F150E Display color 16.7M, display size: 15" TFT, resolution: 1024×768 pixels, built-in ferroelectric memory, support unlimited erase of recipe data.
peculiarity
FUTURE series HMI human-machine interface focuses on human-computer interaction experience ...
|
|
Kinco KW series PLC uses a higher performance CPU
Product Introduction
The K series continues to be rich in functions, high performance, and high reliability
Adopt a higher performance CPU
The body comes with a wireless network interface and Micro USB programming
Mini form factor, metal housing
Kinco-KW series PLC belongs to the small all-in-one PLC ...
|
|
Kinco HMI GH043E 30m/s², 3 axes/1 hour
Product introduction: Kinco HMI GREEN series subway, high-speed rail and other rail transit preferred models, motherboard three-proof treatment to effectively cope with complex use environment, built-in isolated power supply to enhance reliability, classic shape, hidden serial port outlet.
Basic specifications
Display...
|
|
Kinco FM series bus stepper driver power supply voltage: DC24V-70V
Introduction: Kinco FM series bus stepper driver power supply voltage: DC24V-70V, support RS232 serial port communication, with rich IO function settings, support origin, multi-section speed, multi-stage position and other control modes.
Key features:
• Support Modbus/Canopen/E...
|
|
Kinco GT070E-WiFi GT IoT Engineering Plastics
Product introduction: GREEN series human-machine interface GT IoT type 7" high-definition display, 16.77 million true color; Support Ethernet, built-in Wi-Fi function; Powerful scripting function to support edge computing; Built-in IoT function to support remote service.
Basic Specifications ...
|
|
Contact
working hours
