Introduction: XINJE/XINJE inverter VH3 series 0.75-30KW, non-inductive vector control, can smoothly drive large loads at low frequency; The output frequency is up to 500Hz, and it can control high-speed motors.
Features:
Inductive vector control can smoothly drive large loads at low frequencies
The output frequency is up to 500Hz, and it can control high-speed motors
Built-in two kinds of PID adjustment and simple PLC function, convenient for customers to use various needs
Rich and flexible input and output interfaces and control methods, strong versatility
Using SMT full patch production and conformal coating treatment process, the product performance is stable
Perfect protection function, good heat dissipation air duct design
Standard RJ45 network cable external interface (panel is connected to the main control board)
Product parameters
Adapter motor (KW): 0.75
Rated current (A): 2.1AC
Rated voltage (V): AC 380
Frequency range (Hz): 0-500
Frequency resolution (Hz): 0.01
Overload capacity: 150% rated current for 1 minute, 180% rated current for 1 second
Rated voltage/frequency: three-phase 380V; 50Hz/60Hz
Allowable voltage fluctuation: Voltage: -15% - +15% Voltage imbalance rate: <3%
Allowable Frequency Fluctuation: Frequency: ±5%
Power supply capacity (KVA): 1.5
Place of use: indoor, not exposed to direct sunlight, no dust, corrosive gas, oil mist, water vapor, etc
Altitude: Less than 1,000 meters (derating is required above 1,000 meters)
Ambient temperature: -10°C-+40°C
Humidity: less than 90%RH, no condensation
Vibration: less than 5.9 m/s2 (0.6 M)
Storage temperature: ——20°C——+60°C
Protection structure: IP20 (in the case of optional status display unit or keypad)
Cooling method: forced air cooling
Installation: wall-mounted, installed in the cabinet
This article introduces the Xinjie/XINJE low-voltage inverter VH3-40P7 0.75KW products, if you are interested in Xinjie/XINJE low-voltage inverter, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
XINJE/XINJE bus communication touch screen TG-NT frequency 400MHz
Introduction: TG-NT bus communication touch screen X-NET bus function special model 16.77 million colors, delicate picture quality without traces, display effect comparable to LCD display. Download, start, run, trinity of ultra-high-speed response; Support C language scripting function, arithmetic, free protocol writing, drawing ...
|
|
XINJE/XINJE Sport PLC XCM Series The processing speed is 0.5us
Introduction: XINJEXCM series sports PLC, including 60 points specification. It has all the functions of the XC3 series and can meet the various needs of users. External expansion modules are not supported, but BD boards can be connected externally.
...
|
|
The XINJE/XINJE servo drive DS3L-PFA has a built-in braking resistor
Introduction: XINJE/XINJE servo drive DS3L-PFA contains the most intelligent control system, which can significantly resist external disturbances, improve system rigidity, and shorten the positioning time (the positioning time is about 1/2 of the company's previous products). Smoother and faster speed response: DS3 has a built-in state observer, ...
|
|
XINJE/XINJE XG Series I/O Expansion Module 16 modules
Introduction: XINJE/XINJE XG series PLC adapts to the right expansion module of switching input and output, including 8-64 point specifications. The XG series PLC can generally be expanded with 16 modules.
Features:
XG Series PLC Adaptation Switching Input ...
|
|
XINJE/XINJE XD5-48D4T4-E differential model PLC DC 500V
Introduction: XD5 series differential model PLC, support differential input and output signals. Up to 12 times faster than the XC series, with more internal resource space. It supports special functions such as high-speed counting (up to 80KHz), 4-axis pulse output (up to 100KHz), frequency measurement, etc.
...
|
|
Xinjie/XINJE integral controller XP-4AD-BD resolution 0.15mV
Introduction: XP-18, XMP2-32 series integral controller special expansion BD board; Support 14bit analog voltage input, 0-10V, 0-5V; Support PT100 platinum thermal resistance (2-wire system) input, accuracy 0.1°C, support 10bit analog voltage output, 0-10V, 0-5V...
|
|
XINJE PLC XL-E4WT-D DC24V
Introduction: XL series PLC adapts to the right expansion module of temperature input, including 1-point, 2-point and 4-point input specifications. XL series PLCs can generally be expanded with 10-16 modules. Power specification: DC24V (-D type) 24-bit high-precision A/D conversion, which can collect -20-20mV (-D) voltage signal.
...
|
|
XINJE Slim PLC XL1-16T Series CPU Module
Introduction: XINJE simplified version of thin PLC XL1-16T series CPU module, small and practical, saving installation space; Standard configuration of 1 RS232 port and 1 RS485 port; The right expansion module and the left expansion ED module are not supported.
Give birth...
|
|
XINJE/XINJE Enhanced BD Board Z-1WT-BD DC0~10mV
Introduction: ZG3/ZGM series all-in-one special expansion BD board supports 1-channel RS232 or 1-channel RS485 communication, supports 10-bit analog output, current mode; Mounted directly on the back of the integral controller, it does not take up extra space.
Give birth...
|
|
XINJE/XINJE inverter VH3-41P5 current 3.8A 1.5KW
Introduction: XINJE/XINJE inverter VH3 series 0.75-30KW, non-inductive vector control, can smoothly drive large loads at low frequency; The output frequency is up to 500Hz, and it can control high-speed motors.
Features:
Inductive ...
|
|
XINJE MA Series Temperature Module 6PT-P DC24V±10%
Introduction: Xinjie MA series module adopts RS485 communication port, based on the standard Modbus communication protocol, which has wide use significance. Its models include input and output modules, analog input modules, analog output modules, etc., so that PLC, touch screen, all-in-one machine and other phases that support Modbus protocol ...
|
|
XINJE/XINJE Enhanced PLC XC5 Series Insulation voltage DC500V
Introduction: XC5 series enhanced PLC, including 24, 32 point specifications. It has all the functions of the XC3 series and can meet the various needs of users. Support external expansion module and external expansion BD board.
Products...
|
|
Xinjie/XINJE PLC expansion module XCC series DC500V 0.2us
Introduction: XCC series high-performance PLC expansion module faster instruction processing speed, up to 5 channels of pulse output, 5 channels of AB phase high-speed counting support for basic motion control instructions, can achieve two-axis linkage, interpolation, follow-up, coordinate conversion and other functions, but also support most of the ordinary PLC ...
|
|
XINJE standard PLC XC3 series user program capacity 128KB
Introduction: XC3 series standard PLC, including 14, 24, 32, 42, 48, 60 point specifications. It has complete functions and can meet the various needs of users. It supports external expansion modules (except 14 points) and external expansion BD boards (except 14 and 42 points).
...
|
|
XINJE DM5F-2A Servo Drive
Product introduction: flat appearance structure design, convenient wiring, saving installation space; Support gantry synchronization to achieve dual-axis precise synchronization; Support Modbus RTU, EtherCAT (under development, stay tuned), CANopen (under development, stay tuned) multiple communication protocols; Built-in ...
|
|
XINJE oil-resistant touch screen TG-(P) voltage shock AC1000V
Introduction: TG-(P) oil-resistant touch screen, more suitable for heavy oil stained industrial occasions 16.77 million colors, delicate picture quality, display effect comparable to LCD display. Download, start, run, trinity of ultra-high-speed response; Support C language scripting function, operation, free protocol writing, drawing ...
|
|
XINJE/XINJE servo drive DF3E communication port RS232 is standard
Introduction: XINJE/XINJE Servo Driver DF3E Non-Brake Version: 4 DI Inputs/3 DO Outputs; Brake type: 3 DI inputs/3 DO outputs. Input Patterns: Pulse + Direction, AB Phase Pulse, CW/CCW Signal.
Features:
Input frequency: open collector 200kp...
|
|
XINJE touch screen TE765-MT/UT/ET 7" LED backlight
Introduction: TE765-MT/UT/ET touch screen 16.77 million colors - delicate picture quality, touch screen display effect comparable to LCD monitor, support C language script function, operation, free protocol writing, drawing, improve programming freedom.
Give birth...
|
|
XINJE/XINJE XD Series I/O Expansion Module Small PLC
Introduction: Xinjie XD series I/O expansion module PLC adapts to the right expansion module of switching input and output, including 8-32 point specifications. XD series PLC can generally be expanded by 10-16 modules.
Product Details
XD Series PLC Adaptation ...
|
|
Xinjie/XINJE wireless touch screen MTG series resolution 800*480
Introduction: MTG series handheld wireless touch screen, 16.77 million colors true color 7-inch widescreen with exquisite appearance, handheld operation, and higher flexibility. Wireless communication with PLC, fast air transmission speed (up to 115200bps), long communication distance and strong stability.
...
|
|