KEYENCE/KEYENCE Clamp-on Flow Meter FD-R Series DC200mA

Introduction: KEYENCE/KEYENCE Clamp Flow Meter FD-R Series No impact on production during installation, no expertise, no tools or contractors required, no risk of contamination, leakage or pressure loss, installation in minutes using a standard screwdriver, built-in predictive maintenance procedures.

KEYENCE/KEYENCE Clamp-on Flow Meter FD-R Series DC200mA

Features:

Simple installation: no downtime required

Suitable for a wide range of applications: water, deionized water, oils, chemicals, consumer goods, etc

Significant reduction in time and costs: no impact on production during installation

Product parameters

Model		FD-R50	FD-R80	FD-R125	FD-R200
Supported pipeline diameters		1 1/2" (40A), ø44 to ø55 2" (50A), ø55 to ø64	2 1/2" (65A), ø64 to ø83 3" (80A), ø83 to ø100	4" (100A), ø100 to ø127 5" (125A), ø127 to ø152	6" (150A), ø152 to ø191 8" (200A), ø191 to ø220
Supported pipeline materials		Metal pipes, resin pipes*1
Supported fluids		All liquids (water, oil, medicines, etc.)*1
Supported fluid temperatures		-20 to +120 °C (no freezing on the surface of the line)*2
Rated flow range		Rated flow range: 5.0 m/s Flow Conversion Value: 1 1/2" (40A) ： 400 L/min、24 m3/h 2" (50A) ： 600 L/min、36 m3/h	Rated flow range: 5.0 m/s Flow Conversion Value: 2 1/2" (65A) ： 1000 L/min、60 m3/h 3" (80A) ： 1500 L/min、90 m3/h	Rated flow range: 5.0 m/s Flow Conversion Value: 4" (100A) ： 2500 L/min、150 m3/h 5" (125A) ： 3700 L/min、220 m3/h	Rated flow range: 5.0 m/s Flow Conversion Value: 6" (150A) ： 5500 L/min、330 m3/h 8" (200A) ： 9500 L/min、570 m3/h
Zero incision flow rate		Zero incision: 0.3 m/s (default)*3 Flow rate converted value: 36 L/min, 2.4 m3/h	Zero incision: 0.3 m/s (default)*3 Flow rate conversion value: 90 L/min, 5.4 m3/h	Zero incision: 0.3 m/s (default)*3 Flow rate tariff: 220 L/min, 12 m3/h	Zero incision: 0.3 m/s (default)*3 Flow rate tariff: 570 L/min, 36 m3/h
How it is displayed		2-segment 5-digit display using white 14-segment LEDs, large status indicator, output indicator, stability indicator, unit indicator
Displays the refresh period		Approx. 3 times/sec
Display resolution		0.1/1 (L/min)	1 (L/min)
Response time		0.5 s/1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy		20 to 100 % of F.S.: ±2.0 % of RD45 6 to 20 % of F.S.: ±0.4 % of F.S.45
Zero-point error		±0.5 % of F.S.46
lag		Variable
Flow Units		L/min、m3/h
Integrated flow device display		1/10/100/1000/10000 (L)
Piping temperature detection accuracy		±3 °C (piping temperature -20 °C to +50 °C), ±5 °C (piping temperature 50 °C to 120 °C) (at ambient temperature 25 °C)*4
Wiring specifications	power supply	Selectable DC Power Supply: M12 4pin Connector/AC Power Supply: M4 Screw Terminal Block
	I/O	When using DC power: M12 4pin connector / When using AC power: M3 screw terminal block
Inputs/Outputs (Optional)	Output (Channel 1 / Channel 2)	Control output/Cumulative pulse output/Error output/Temperature alarm NPN/PNP setting switching Open collector output 30 VDC or less Maximum 100 mA/ch or less Residual voltage 2.5 V or less*7
	Analog output (channel 2)	Flow Analog Output/Temperature Analog Output Switchable 4 to 20 mA/0 to 20 mA Load resistance 500 Ω or less*7
	External Input (Channel 2)	Cumulative Reset Input/Zero Flow Input/Zero Adjustment Input (Switchable) The short-circuit current is 1.5 mA or less, and the input time is 20 ms or more*7
Protection circuits		Power supply reverse polarity protection, power surge protection, short-circuit protection for each output, surge protection for each output
rated	Supply voltage	20 to 30 VDC incl. ripple (P-P) 10 % Class2/100 to 240 VAC -15 %/+10 % (50/60 Hz)
	Current consumption	200 mA or less (without load current) / 400 mA or less (including load current) when using DC power supply Below 15 VA when using AC power supply
Environmental resistance	Enclosure protection grade	IP65/67 (IEC60259) 、IP69K (ISO20653) 、Enclosure Type 4X (NEMA250)
	Ambient temperature	-20 to +60 °C (no freezing)*2
	relative humidity	5 % to 90 %RH (non-condensing)
	Earthquake resistance	10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions
	Impact resistance	100 m/s2, 16 ms pulses, 1000 pulses each in the X, Y, Z directions
Dimensions		Body unit dimensions: 218.5 mm x 66.9 mm x 70.7 mm
Material	Ontology unit	Body: Cast Aluminum + Coating/PPS, Display: Tempered Glass, Connector Part: SUS304 Equivalent
	The back of the unit	Special rubber
	Top/bottom bracket	SUS304
weight		Main unit: approx. 1.0 kg Top/bottom bracket: approx. 1.5 kg (with separator)	Main unit: approx. 1.0 kg Top/bottom bracket: approx. 2.0 kg (with separator)	Main unit: approx. 1.0 kg Top/bottom bracket: approx. 2.3 kg (with separator)	Main unit: approx. 1.0 kg Top/bottom bracket: approx. 2.5 kg (with separator)

This article introduces the KEYENCE/KEYENCE clamp-on flowmeter FD-R series products, if you are interested in KEYENCE/KEYENC flowmeter, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

KEYENCE/KEYENCE Clamp-on Flow Meter FD-R Series DC200mA

Sections viewed

Contact

working hours