KEYENCE/KEYENCE Laser Sensor LR-TB2000/5000 Reflectivity

Create Date: 2024-8-30 12:03:23|Source: KEYENCE

Previous
Next
Brand:
KEYENCE

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
LR-TB2000/5000

Product Introduction
The LR-T series features an intuitive user-friendly interface with high-visibility indicators to simplify installation and troubleshooting, and a supply voltage of 20 x 30VDC continuous wave (p-p) 10%, Class 2 or LPS.

quality assurance

Attentive service

Secure transactions

Product Description

Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series maximizes efficiency by providing stable detection from a position that does not obstruct the operator, eliminating the error caused by accidental impact on the sensor.

KEYENCELR-TB2000/5000

Product parameters

Model		LR-TB2000	LR-TB5000
type		Cable type
Detection distance		60reach2000mm*1	60reach5000mm*6
Spot diameter		about4mm	Variable (at ∅40mmThe following uses）
light source	class	Red laser (660nm）
Response time		1ms/10ms/25ms/100ms/1000msSwitch mode
Prevent mutual interference function		4Unit (when using the interference prevention function)
timer		OFF/OFF-Delay/ON- Delay/ single pulse
power supply	Supply voltage	20only30VDCLianbo(p-p）10%、Class2orLPS
	Current consumption	45mAhereinafter*3	50mAhereinafter*7
I/O	Control the output	NPN Open collector/PNP Open collector switching mode 30 VDC hereinafter50 mA Below, residual voltage 2 V hereinafter N.O./N.C. Switch mode 45
	External inputs	Casting stops/ Tuning/ The plane is updated(useDATUM mode)Switch mode Short-circuit current　NPN：1 mA hereinafter/PNP：1 mA hereinafter
Protection circuits		Power supply reverse polarity protection, power surge protection/output short circuit protection, output reverse polarity protection, output surge protection
Environmental resistance	Enclosure protection grade	IP65/ IP67 (IEC60529)
	Ambient lighting	incandescent lamp/Daylight:10,0000 lux hereinafter
	Ambient temperature	-20 reach +55 °C (No freezing)
	relative humidity	35 reach 85 % RH (No condensation)
	Earthquake resistance	10 reach 55 Hz, double amplitude 1.5 mm、X,Y,Z directions 2 Hours
	Impact resistance	1,000 m/s2、X,Y,Z directions 6 times
weight		about125(Cable included)	about200g(Cable included)

This article introduces the KEYENCE/KEYENCE laser sensor LR-TB2000/5000 reflective products, if you are interested in KEYENCE/KEYENCE laser sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

More on that

	KEYENCE/KEYENCE Laser Sensor LR-X Series The new Ultra-Small pursues "Ultra-Small × Stable Detection". It can be installed in a variety of places Green Laser × Mirror structure × Customized CMOS Sensors A new triangulation ranging system that achieves ultra-miniaturization It can stably detect a wide range of targets, from highly reflective metals to black workpieces ...
	KEYENCE/KEYENCE Sensor Head Spot Type LK-H150 Sensor head spot type LK-H150 specification This article introduces KEYENCE/KEYENCE sensor head light spot type LK-H150 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...
	KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51CN KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Mini Slim Permeable Type M8 Connector Type 1.2m specification This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F series.
	KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 2 m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard. This paper...
	KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2050 Sensor controller handsetter specification 1 Displayed on the IX touch panel or PC software. 2 Can be set according to the program. 3 Diameter tool only, up to 8 pieces. 4 When sample hold (edge), peak/valley, and P-P hold (horizontal/edge) are set. ...
	KEYENCE/KEYENCE Multi-Point Laser Sensor IX-CP50 Control panel for IX specification 1 Dedicated to connection to IX-1000/1050/H2000/H2050. 2 When connecting to the IX-H2000/H2050, only Chinese (Simplified), Japanese, and English are supported 3 Please use KEYENCE's recommended products. 4 When the ambient temperature exceeds 40°C, ...
	KEYENCE/KEYENCE PHOTOELECTRIC SENSOR WITH BUILT-IN ULTRA-MINIATURE AMPLIFIER PR-M/F SERIES PR-M51C3PL Mini Slim Permeable M8 Connector Type 1.2m PR-M51C3PL specification *1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L". Example) PR-M ...
	KEYENCE/KEYENCE Sensor Head Spot Type LK-H057 Sensor head wide type laser class 2 LK-H057 specification This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H057 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology ...
	KEYENCE/KEYENCE Sensor Head Spot Type LK-H058 Sensor head wide type laser class 3B LK-H058 specification This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H058 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology ...
	KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50CG (Detection Distance: 50mm) KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 50mm) 1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. 2 ...
	KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB30CN KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective M8 Connector Type 30mm PR-FB30CN specification In this article, we introduce the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-FB30CN products, ...
	KEYENCE/KEYENCE Sensor Head LJ-G080 Enclosure rating: IP67 (IEC60529) Ambient light: Incandescent/fluorescent: 5,000 lux*5 max Ambient temperature: 0 to +50 °C Relative humidity: 35 to 85 % RH (non-condensing) Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
	KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH490CB Screw type reflective type M12 connector type 490mm This article introduces the LR-Z series LR-ZH490CB products with CMOS laser sensor built into KEYENCE/KEYENCE amplifiers, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
	KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series LR-TB2000 Detection distance: 2m Cable type Laser classification 2 Reflective laser sensor with detection distance** up to 5 meters in length, regardless of installation limitations. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces. specification 1 Can be displayed from 50 to 2200. 2 FDA(CD ...
	KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB90CB Threaded reflective type M12 connector type 90mm specification 1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. In addition, when "-99" is exceeded, the display will change to "-FF". 2 The FDA's (CDRH) laser classification is based on ...
	KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100P Square Reflective Cable Type 100mm specification 1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". 2 The FDA's (CDRH) laser classification is based on IEC608 ...
	KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH500N NPN Output Cable Exit Type (2m) Reflective sensor with through-beam stability. It is not affected by the surface color, material, inclination, etc. of the workpiece. 316L stainless steel body shell, protection grade IP68/69K, can be used in various occasions. Launched high-power type Reflective type using traditional* light intensity detection ...
	KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M) KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 50 mm) with a cable length of 10 m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) on the IEC60825-1 basis ...
	KEYENCE/KEYENCE Multi-Point Laser Sensor IX Series Identifies the height of various locations within the area The workpiece is captured by the camera and the specified point is tracked The height of the specified point is identified by the laser Lasers can detect the height and height difference of multiple points of the target at the same time, even if the product position is skewed. Product Features: A la carte ...
	KEYENCE/KEYENCE Sensor Head Color Screen CA-MP120 12 inch LCD color screen (analog XGA) CA-MP120 Pixels: 1,024 (W) × 768 (H) pixels or 800 (W) × 600 (H) pixels Display area: 245 (W) × 184 (H) mm Supply voltage: 24 VDC ±10 % Deplete...