Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 36 V DC （20 °C）
The input voltage range referenced to UN is shown in the graph
Typical input current at UN is 9 mA
Typical response time is 5 ms
Typical release time is 8 ms
Coil voltage 24 V DC
Protection circuit: Freewheeling diode
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 1 N/O contact
Switch contact type Single contact
Drive and function monostability
Contact material AgSnO, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV (10 mA)
Limit continuous current to 50 mA
The maximum starting current is 50 mA
Minimum switching current 1 mA (12V)
Maximum power rating (resistive load) 1.2 W (24 V DC)
Use category CB Scheme (IEC 60947-5-1) AC15, 3 A/250 V (N/O contacts)
AC15, 1 A/250 V (NC contact)
DC13, 1.5 A/24 V (N/O contact)
DC13, 0.2 A/110 V (N/O contacts)
DC13, 0.1 A/220 V (N/O contacts)
Switching: When the gold plating is broken
Precautions If the plating is damaged, the following values can be applied
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limit continuous current to 6 A
Minimum switching current 10 mA at 12 V
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 1.5 mm²
Flexible conductor cross-section 0.14 mm² ... 1.5 mm²
0.14 mm² … 1.5 mm² (ferrule with plastic sleeve)
Attachable guide cross-section AWG 24 ... 16
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix relay module RIF-0-RPT-24DC/ 1AU - 2903359 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single Relay REL-MR-BL- 24AC/21-21 - 1109546
Pluggable miniature power relay in basic design with power contacts, 2 changeover contacts, input voltage 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 5x106 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3 ...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21HC/MS - 2910533
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), Push-in connection, 1 changeover contact, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21/EX - 2909524
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/1/SSI - 1094765
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH PLUG-IN CONNECTIONS AND "HOT" PLUG-IN MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND AN APPROPRIATE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO NO U, 12 V DC RATED INPUT VOLTAGE
The maximum power consumption under the rated condition is 0.22 W
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR - 24AC/21HC/MS - 2987891
Plug-in miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 24 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
Integrated status LEDs
Mechanical switch position display
...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-BL-1T-230-PT - 2905814
Compact multi-function time relay with 4 functions, adjustable time range (50 ms - 1 h), Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - MACX-TR-1T-MUL - 1096429
Multifunction Time Relay, 24 V AC/DC ... Ample power supply of 240 V AC/DC, 13 functions, configurable time range (10 ms...) 999 h: 59 min), available in two configurations, password protected, support for dry contact, PNP and NPN proximity switch inputs, 2 ...
|
|
REL-MR-120AC/21-21AU - Phoenix/Single Relay from Phoenix - 2961477
Plug-in miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 120 V AC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 120 V AC
Input voltage range 93.6 V AC ... 186 V AC
Trunk frequency 50/60 h ...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21-21/MS - 2910520
PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE POWER CONTACT RELAY WITH MANUAL OPERATION AND INTEGRATED STATUS LED, PUSH-IN CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental Strip ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21AU - 2966126
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 1 PDT, input voltage 48 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/LDP- 48DC/2X21 - 2903661
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 48 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module RIF-0-RSC-12DC/ 1 - 2903367
Prefabricated relay modules with screw connections, including: relay base with pop-up and power contacts. Contact type: 1 NO contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) ...
|
|
Phoenix/Phoenix Single Relay REL-MR-BL-110DC/21-21 - 1109545
Plug-in miniature power relay with power contacts, 2 changeover contacts, input voltage 110 V DC
handoff
Contact Type: 2 changeover contacts
Switch contact type Single contact
Drive and function monostability
Contact material AgNi
Maximum switching voltage 250 V AC ...
|
|
Phoenix/Phoenix relay module RIF-0-RSC-12DC/ 1AU - 2903365
Prefabricated relay modules with screw connections, including: relay base with ejection device and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 k ...
|
|
RIF-0-RSC-24DC/21AU - 2903372
Prefabricated relay modules with screw connections, including: relay base with ejection device and multi-layer gold-plated contact relays. Contact type: 1 changeover contact. Input voltage: 24 V DC
The maximum power consumption under the rated condition is 0.22 W
Test voltage (coil/contact) 4 k ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21-21AU - 2967138
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/110 V DC
Maximum power consumption under rated conditions 0.54 W ...
|
|
The Phoenix/Phoenix relay module PLC-RSC-230UC/21HC 2967675
PLC-INTERFACE, incl. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relays for high continuous currents, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 230 V AC/220 V D...
|
|
RIF-4-RSC-LV-230AC/3X21-2903285 relay modules from Phoenix
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 230 V AC
The maximum power consumption under rated conditions is 3.22 W
Test voltage ...
|
|
RIF-1-RSC-LV-24AC/2X21 relay module from Phoenix/Phoenix - 2903349
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 0.79 W
Test voltage ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-115AC/4X21 - 1157971
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 115 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Contact
working hours
