The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 24V AC/DC
advantage
Low-profile design
Efficient system connectivity via V8 adapter
RT III Hermetically Sealed Relay
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Functional plug-in bridges
The maximum power consumption under the rated condition is 0.42 W
Test voltage Coil/contact 4 kV AC (50 Hz, 1 minute, coil/contact)
Test Voltage CO Contact/CO Contact 2.5 kV AC (50 Hz, 1 min, CO Contact/CO Contact)
Rated overvoltage 6 kV
Coil side
Rated input voltage UN 24 V AC/DC
Input voltage range 20.6 V AC/DC ... 33.6 V AC/DC （20 °C）
Typical input current at UN 17.5 mA (at UN = 120V AC)
17.5 mA (at UN = 24 V DC)
Typical response time is 8 ms
Typical release time is 10 ms
Protection circuits: bridge rectifiers; Bridge rectifiers
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 2 changeover contacts
Switch contact type Single contact
Drive and function monostability
Drive (Polarity) Bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 5 V AC/DC (10 mA)
Limit continuous current to 6 A
Maximum start-up current 15 A (300 ms)
Minimum switching current 10 mA (5 V)
Maximum power rating (resistive load) 140 W (24 V DC)
85 W (for 48 V DC)
60 W (can be used for 60 V DC)
44 W (for 110 V DC)
60 W (for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
0.2 A at 250 V, 13 DCs
3 A (at 250 V, AC15)
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Tightening torque 0.6 Nm ... 0.8 Nm
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module PLC-RSC- 24UC/21-21 - 2967073 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-SL-2T-I - 2866174
Pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-range power supply, 2 PDT
Increasing demands are placed on safety and system reliability in all areas. Processes in mechanical engineering, the chemical industry, power plants and automation technology are becoming more and more complex.
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21AU - 2961121
Pluggable miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Give birth...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21AU/MS - 2909672
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 m ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21AU/RW-2900322
PLC-INTERFACE for rail applications, including base terminals, with PCB connectors and pluggable miniature multilayer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 72 V DC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21HC - 2900291
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 24 V DC
advantage
...
|
|
REL-PR3-220DC/3X21 - 2909055
Plug-in high-power relay with power contacts, 3 switching contacts, coil voltage: 220 V DC
Coil side
Rated input voltage UN 220 V DC
Input voltage range 187 V DC ... 242 V DC (see graph)
Typical input current at UN is 6 mA
UN's loss ...
|
|
Phoenix/Phoenix relay module RIF-4-RPT-LV-120AC/3X21 - 2903277
Prefabricated relay modules with Push-in connection, including: relay base, power contact relay, plug-in display/interference suppression module, and fixed bracket. Contact switching type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under the rated condition is 2.88 W
Measure...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-115AC/4X21 - 1157971
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 115 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21HC/MS - 2910517
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 1 changeover contact, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/21-21/EX - 2909513
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contacts, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Forehead...
|
|
REL-PR1-220DC/1/MB - 2908046
Plug-in high-power relay with power contacts, specially designed for switching high DC loads, 1 NO contact, arc extinguishing magnet, coil voltage: 220 V DC
Coil side
Rated input voltage UN 220 V DC
Input voltage range 187 V DC ... 242 V DC
UN-referenced input ...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-12DC/21AU - 2903369
Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 PDT. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 kVrms ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-115AC/4X21 - 1109564
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/L-230AC/3X21 - 2903696
Pluggable eight-position relay with power contacts, 3 PDT, test button, mechanical switch position display, input voltage 230 V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21/MS - 2909668
PLC-INTERFACE, INCL. PLC-BPT.../21 BASE TERMINAL, PLUG-IN CONNECTION, PLUG-IN MINIATURE RELAY WITH POWER CONTACTS AND MANUAL OPERATION, 1 CO CONTACT, 24 V AC/DC INPUT VOLTAGE
advantage
Low-profile design
Effective system use via V8 adapter
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC - 296438
Relay module with solid state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 230 V AC/DC
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) 4 kV AC (50 Hz, 1 minute, coil/contact) ...
|
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21 - 2900303
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 60 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - TR-ES-MUL-24/240-10H - 2907322
Multifunctional timing relay with 7 functions and an adjustable time range (50 ms - 10 h) for supply voltages 24 - 48 V DC/24 - 240 V AC, 1 PDT
size
Width 17.5 mm
Height 98 mm
Depth 57.9 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Relay module with manually operated locking - RIF-1-RPT-LV-230AC/2X21MS - 2905292
Pre-assembled relay modules with plug-in connections, including: relay base, relay holder, plug-in suppressor module and high-power contact relay with test button and integrated status LED. Contact type: 2 PDT. Input voltage: 230 V AC
RIFLINE complete ...
|
|
Contact
working hours
