PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V AC/DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 60 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT III (relay)
IP20 (Relay Base)
Coil side
Rated input voltage UN 24 V AC/DC
Typical input current at UN 11 mA (at UN = 120V AC)
8.5 mA (at UN = 24 V DC)
Typical response time is 6 ms
Typical release time is 15 ms
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Power consumption at rated conditions is 0.26 W
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgSnO, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV at 10 mA
Minimum switching current 1 mA (24 V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limit continuous current to 6 A
Minimum switching current 10 mA at 12 V
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 2x 107 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure IEC 60664
IEC 60664A
DIN VDE 0110
DIN EN 50178/VDE 0160 (relevant part)
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (relevant parts)
Pollution level 3
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 24UC/21AU/MS - 2909673 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT- 5DC/1/SSI - 1094764
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH PLUG-IN CONNECTION AND "HOT" PLUG-IN MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND A SUITABLE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO NO NO AT 5 V DC RATED INPUT VOLTAGE
Rated supply voltage 24 V DC
Input current ...
|
|
Phoenix/Phoenix relay module PLC-RPT-24DC/21/EX - 2909528
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with plug-in connection and "hot" plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. ATEX/IECEx (Zone 2) and Ex zone Class I, Div. 2 ...
|
|
REL-PR3-230AC/3X1 2903709 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range 195.5 V AC ... 253 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input electricity under UN ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21/RW 2900318
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
advantage
...
|
|
Phoenix/Phoenix relay module - RIF-4-RPT-LDP-24DC/3X21 2903278
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 3 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC ...
|
|
Phoenix/Phoenix Single Relay REL-MR-110DC/21-21/EX - 2908824
Plug-in miniature power relay, sealed version RT III, with power contacts, 2 changeover contacts, input voltage: 110 V DC, in combination with the corresponding PLC base, certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Advantages: Cutting up to 8 A ...
|
|
RIF-1-RPT-LV-120AC/2X21 relay module from Phoenix/Phoenix - 2903332
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 120 V AC
Maximum power consumption of 1 W under rated conditions
Test voltage Coil/contact 4 ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-115AC/4X21 - 1109564
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21/EX-2909739
Prefabricated relay modules include: relay base, plug-in function module, power contact relay and bracket, certified according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Zone 2, Push-in connection, 4 PDTs, varistor, input voltage: 230 V AC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21 - 2900303
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 60 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-24AC/4X21 - 1157979
"Hot" pluggable power relay, basic, 4 PDTs, status display: LED green, input voltage: 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Winding/contact 2 kVrms ( ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 60DC/21/MS - 2909643
Pluggable miniature power relay with power contact, 1 changeover contact, manual operation, 60 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1ICT/ACT - 1078680
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BSC.../1 IC/ACT base terminals with screw connection and pluggable miniature relays, can be mounted on the DIN rail NS 35/7,5, with a maximum inrush current of up to 800 A, 1 NO contact, 24 V DC input voltage
Excellent...
|
|
Relay module with manually operated locking - PLC-RSC-125DC/21AU/MS - 2909658
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 125 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 9 ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21 - 2966207
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 1PDT, input voltage 230V AC/220V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/L-230AC/3X21 - 2903696
Pluggable eight-position relay with power contacts, 3 PDT, test button, mechanical switch position display, input voltage 230 V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21 - 2951885
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
RIF-4-RSC-LV-120AC/3X21 relay module from Phoenix/Phoenix - 2903287
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under the rated condition is 2.88 W
Test voltage ...
|
|
REL-MR-120AC/21HC - 2961419 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 120 V AC
Advantage: Switching current up to 16 A
Coil side
Rated input voltage UN 120 V AC
Input voltage range 93.6 V AC ... 186 V AC
...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21-21AU/MS - 2910529
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 ...
|
|
Contact
working hours
