Omron DC Power Electrode Level Switch 61F-GPN-BT / -BC In the absence of AC power, it can be driven by a battery (DC24V). In addition, the voltage between the electrodes is an alternating sine wave, and there is no electric erosion, so it can achieve stable detection
Self-holding processed by loops allows you to select self-holding with output ON or OFF.
The sensitivity of the operating resistor from 0 to 100 kΩ is variable, and a wide range of liquids are supported.
The relay contact chatter caused by voltage fluctuations has been replaced with NPN output to eliminate contact wear.
CE marked, UL/CSA certified.
Rated specifications
Rated voltage DC24V
Allowable voltage fluctuation range: 85%-110% of rated voltage
The voltage between the electrodes is 5V or less
Operating resistance variable (0-100kΩ)
Error Scale 0 (+10kΩ)
Scale 100 (± 10kΩ)
Reset Resistance 200% or less of the value of the working resistance
Water supply and drainage switching: If terminal 7-8 is open, the drainage will run automatically
If terminal 7-8 is short-circuited, the water supply will run automatically
Output Specifications • 61F-GPN-BT
Open Collector (NPN)
DC30V, 100mA, leakage current 100μA or less
• 61F-GPN-BC
Relay Output (1A)
DC30V 5A, AC240V 5A (resistive load)
Accessories Fixing Bracket PFC-N8
Wiring distance * 100m or less
performance
The ambient temperature is -10-+55°C
Ambient humidity 25-85%
Insulation resistance: 100MΩ or more, DC500V megohmmeter
Withstand voltage * AC2,000V 50/60Hz for 1 minute
Power consumption 2W or less
Response time When operating: 1.5 seconds or less
At reset: 3.0s or less
Applicable Standards: UL61010-1, CAN/CSA CSA C22.2, No. 61010-1 EN61010-1,
EN61326-1 Industrial electromagnetic environment use
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces Omron/Omron conductive level switch 61F-GPN-BT/-BC products, if you are interested in Omron, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Omron General Basic Switch X Leakage Performance (PTI) 175
Introduction: DC switch with built-in magnetic arc extinguishing, leakage performance (PTI) 175, insulation resistance min. 100MΩ (at 500V DC).
peculiarity
A small permanent magnet that deflects the arc is placed in the contact mechanism to effectively eliminate it.
The shape and installation steps are similar to the ...
|
|
Omron High Temperature Standard Switches TZ Contact Resistance 100 mΩ or Less (Initial Value)
Introduction: Stable operation at ambient temperature of 400°C, contact resistance of 100 mΩ or less (initial value), use ambient temperature of -65°C~400°C (no icing).
peculiarity
Ceramic insulators, cobalt alloy springs and special alloy contacts are included to ensure high ambient temperatures ...
|
|
Omron Conductive Level Switch K8AK-LS
Introduction: The Omron Conductive Level Switch K8AK-LS has a self-holding function that does not pass through external wiring, but through loop processing.
Features:
By switching the setting of the DIP switch, it is possible to switch between water supply and drainage.
Working resistance 10k-100kΩ ...
|
|
OMRON Travel Switch WLCA12-2N-N BY OMR 2NO+2NC
Product Introduction
A variety of head shapes are available in combination with the environment and application
· Various head shapes such as rotary pendulum type, plunger type, tentacle type, fork locking pendulum type
· Select the most suitable shape from a variety of drive rods according to the shape and operation of the workpiece
· ...
|
|
Omron A165E E/E Emergency Stop Switch PTI (Tracking Characteristics): 175
Introduction: Omron/Omron A165E Emergency Stop Switch PTI (Tracking Characteristics): 175, Ambient humidity: 35%~85%, in accordance with EN 60947-5-5 standard, equipped with a safety lock to prevent abuse.
peculiarity
The forced disconnect structure can be used to force the ...
|
|
Omron D4NL solenoid locking safety gate switch 4kV between different terminals
Introduction: Omron D4NL electromagnetic locking safety gate switch is a multi-contact miniature electromagnetic locking safety door switch with a wide range of varieties, which can choose the insertion direction of the operating key and adjustable installation to ensure the flexibility of installation.
peculiarity
Selectable operation key insertion direction and ...
|
|
Omron D41L High Code Electromagnetic Locking Safety Gate Switch Frequency band 125kHz
Introduction: The Omron D41L High Code Electromagnetic Locking Safety Door Switch is a safety gate switch for sanitary equipment, the hinged door can be installed on the left or right side, and the latching force can be easily adjusted.
peculiarity
Hinged doors can be installed on either the left or right side
Trigger...
|
|
Omron D4NA safety limit open heteroterminal room: 4kV
Introduction: Omron D4NA is an economical safety limit switch, off insulation resistance: more than 100MΩ, contact spacing: 2 × 0.5mm or more, standardized gold-plated contacts to ensure high reliability of contact.
peculiarity
Standardized gold-plated contacts guarantee a high contact ...
|
|
The ORMON proximity switch EE-SX671 has a response frequency of 1kHz
Features:
Operation mode ON when shading and ON when light is in (switchable type)
High-speed response with a response frequency of 1kHz
The light entry indicator is clear for easy operation confirmation
The power supply voltage is DC5 - 24V wide range
Equipped with a light inlet when shading ...
|
|
Omron S8VK-S Switching Power Supply Protection structure: IP20
Introduction: Omron S8VK-S switching power supply Protection structure: IP20, static input variation *7: 0.5% or less, suitable for small control cabinets, using substrate coating to improve environmental resistance, in-line wiring, easy wiring.
peculiarity
Make the control cabinet smaller
...
|
|
Omron/Omron In general, the basic switch A is 15mΩ or less
Introduction: High capacity switch capable of handling 20A loads with high inrush currents
peculiarity
The shape is the same as Omron's standard switches (except for the needle plunger position) and can still withstand inrush currents up to 75A.
We will be honest and trustworthy, convenient and fast way of operating ...
|
|
Omron Special Standard Switch DZ Mass approx. 30~50g
Introduction: DPDT standard switch for control of two independent circuits
peculiarity
It is well suited for switching circuit operation at different voltages and for controlling two independent circuits.
It is interchangeable with the Omron Z standard type switch because of the mounting hole size of the two switches, the mounting ...
|
|
Omron generally uses the basic switch Z 15A
Introduction: The basic type switches, which are known for their high precision and abundant variety, are available in basic types of micro switches, and there are also a variety of basic types depending on the application, such as the basic type, the split contact type, and the maintenance contact type.
peculiarity
The break-circuit capacity is up to 15A and the accuracy is high.
Micro ...
|
|
Omron S8FS-C Switching Power Supply Weight: 150g or less
Introduction: Omron S8FS-C Switching Power Supply Weight: 150g or less, voltage adjustable range *: -10~+10% (V.ADJ), wide current range input: AC100-120V, AC200-240V series, DIN rail installation can also be easily achieved with separately sold accessories.
peculiarity
...
|
|
Omron S8VK-T Switching Power Supply Life expectancy*10: More than 10 years
Introduction:Omron S8VK-T Switching Power Supply Life expectancy*10: more than 10 years, protection level: EN/IEC 60529 IP20, simple installation, quick to use, miniaturized design, saving cabinet space.
peculiarity
Can be used in harsh environments
Installation is simple ...
|
|
Omron D5B Mechanical Contact Switch Degree of protection: IP67
Introduction: The Omron D5B mechanical contact switch is ideal for inspecting objects from multiple directions, with high precision, and robots. Protection level: IP67, allowable operating speed: 5~500mm/s.
peculiarity
Adopt a slow-acting switching mechanism.
Gold-plated contacts, capable of opening ...
|
|
Omron D4NE Safety Limit Switch Rated frequency: 50/60Hz
Introduction: Omron D4NE is a safety limit switch in accordance with the global standard EN 50047, rated frequency: 50/60Hz, weight: about 47g (when D4NE-4G31), ambient temperature: -30~+70°C (no icing).
peculiarity
The contact composition is complete, and there is a single contact ...
|
|
Omron Safety Limit Switch D4N Insulation Resistance: 100MΩ or more
Features:
Models with 1NC/1NO, 2NC, 2NC/1NO and 3NC contact styles are available. (MBB contact slow-acting type is also available.) ）
In addition, the M12 connection type is available, which is more labor-saving and easier to replace.
Can be used for standard loads and tiny ...
|
|
OMRON Travel Switch D4V-8107Z-N BY OMR IP65
Product Introduction
Small longitudinal Asian standard size
The terminal section is fully open for easy wiring
Protection structure IP65
Product parameters
Brand: OMRON
Series: D4V-N
Model: D4V-8107Z-N BY OMR
Product...
|
|
OMRON Safety Door Switch Operation Key D4DS-K2 2NC/1NO
Product Introduction
A new generation of multi-contact safety door switch saves labor and is beneficial to environmental protection.
Features:
In addition to the original 1NC/1NO and 2NC contact structures, the product series has added 3-contact type and MBB M12 connectors equipped with 2NC/1NO and 3NC contact structures.
|
|
Contact
working hours
