Introduction: Omron S8VK-S switching power supply Protection structure: IP20, static input variation *7: 0.5% or less, suitable for small control cabinets, using substrate coating to improve environmental resistance, in-line wiring, easy wiring.
peculiarity
Make the control cabinet smaller
Smaller* global power supply
The smaller*1 body and snug fit allow for more design freedom
Advanced high-power, low-loss technology
Proven thermal control technology
By improving environmental resistance, it can be used in a variety of situations
Hold it with a screwdriver, and you can work with both hands
Easy to plug in
Not easy to loosen
parameter
power | 60W | 120W | project | Rated output voltage | 24V | 24V | efficiency | AC115V
*1 when entering | 87% typ. | 90% typ. | AC230V
*1 when entering | 89% typ. | 92% typ. | input
condition | Input voltage tolerance range *2 | Single-phase AC85~264V, DC90~350V*13, AC265~300V (1 second) | Frequency *2 | 50/60Hz (47～450Hz) | 50/60Hz (47～63Hz) | Input current | AC115V
*1 when entering | 1.1A typ. | 1.2A typ. | AC230V
*1 when entering | 0.66A typ. | 0.63A typ. | Power factor*1 | - | 0.9 or more | Leakage current *3 | AC115V
When entering | 0.5mA or less | AC230V
When entering | 1mA or less | Inrush current *4
(25℃、
Cold start) | AC115V
When entering | 16A typ. | AC230V
When entering | 32A typ. | output
characteristic | Rated output current | 2.5A | 5A | Rated output power | 60W | 120W | Maximum peak current | 3A | 6A | Voltage variable range *5 | 21.6～28V (V.ADJ) | Ripple noise
Voltage *6 | AC100V
～240V
*1 at the time of input | 190mVp-p or less
At 20 MHz | 110mVp-p or less
At 20 MHz | Static input change *7 | 0.5% or less | Stationary load fluctuation *8 | 1.5% or less | Temperature fluctuations | AC100V
～240V
When entering | 0.05%/°C or less | Startup time *4 | AC115V
*1 when entering | 1,000ms or less | 1,000ms or less | AC230V
*1 when entering | 1,000ms or less | 1,000ms or less | output
Hold time
*6 | AC115V
*1 when entering | 20ms typ. | 45ms typ. | AC230V
*1 when entering | 95ms typ. | 45ms typ. | Incidental
function | Overcurrent protection | Yes, auto-reset | Overvoltage protection *9 | Yes More than 130% of rated output voltage, open circuit (power off reset) | In-line operation | Yes (up to 2 units, external diodes required) | Run in parallel | Yes (up to 2 power supplies) Please refer to the sample "●About parallel operation". | Output indicator | Yes (LED, color: green) | Undervoltage detection output | not | insulation
Pressure-resistant | Pressure-resistant | AC3.0kV 1min (all input terminals) and (all output terminals) between 10mA | AC2.0kV 1min (all input terminals) and (  ), the cut-off current is 10mA | AC1.0kV 1min (all output terminals) and (  ) between 20mA | Insulation resistance | 100MΩ or more, DC500V (all output terminals) and (all input terminals ·)  ). | environment | Operating ambient temperature *10 | -40~+70°C (rated attenuation due to temperature) (no icing, condensation) | Storage temperature | -40~+85°C (no icing, no condensation) | Use ambient humidity | 95%RH or less (storage humidity 95%RH or less) | Vibration resistant | 10~55Hz Max 5G single amplitude 0.42mm 3 directions 2h each | Impact-resistant | 150m/s2 3 times in each of the 6 directions | reliability | MTBF *11 | More than 135,000 hours | Lifespan *12 | More than 10 years | structure | weight | 250g or less | 400g or less | Cooling fan | not | Protective structures | IP20、EN/IEC 60529 | accord with
standard | Higher-order harmonic suppression | Complies with EN 61000-3-2 | EMI | noises
Terminal voltage | Complies with EN 61204-3 ClassB, EN 55011 ClassB | Radiated interference
Electric field strength | Complies with EN 61204-3 ClassB, EN 55011 ClassB | EMS | EN 61204-3 high severity levels | Safety standards | UL Listing：UL 508,ANSI/ISA 12.12.01
(For 60W only Class2 Output：Per UL 1310)
cUL：CSA C22.2 No.107.1、
CSA C22.2 No.213
(For 60W only Class2 Output：Per CSA C22.2 No.223)
UL UR：UL 60950-1(Recognition) OVCⅡ (≦3000m) Pol2
cUR：CSA C22.2 No.60950-1 OVCⅡ (≦3000m) Pol2
EN：EN 50178 OVCⅢ (≦2000m) OVCⅡ (2000m＜and ≦3000m) Pol2、
EN 60950-1 OVCⅡ (≦3000m) Pol2 Complies with PELV (EN/IEC 60204-1) *13 Complies with EN/IEC 61558-2-16:2009+A1:2013 *13 | Ship standard *13 | LR standard | SEMI standard | Compliant with SEMI F47-0706 (AC200~240V input) standard |
This article introduces the Omron S8VK-S switching power supply protection structure: IP20 products, if you are interested in Omron switching power supply, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
|
More on that
|
OMRON SS-5GL2 BY OMI Position Switch
Introduction: OMRON SS-5GL2 BY OMI SS series subminiature basic switch, contact type: 1NO+1NC
It is Omron's best-selling micro switch with a wide range of specifications and a wide range of 0.1A~10.1A types.
The operating force specifications meet the requirements of low load operation to high negative ...
|
|
Omron D4NA safety limit open heteroterminal room: 4kV
Introduction: Omron D4NA is an economical safety limit switch, off insulation resistance: more than 100MΩ, contact spacing: 2 × 0.5mm or more, standardized gold-plated contacts to ensure high reliability of contact.
peculiarity
Standardized gold-plated contacts guarantee a high contact ...
|
|
OMRON Travel Switch WLCA12-2N-N BY OMR 2NO+2NC
Product Introduction
A variety of head shapes are available in combination with the environment and application
· Various head shapes such as rotary pendulum type, plunger type, tentacle type, fork locking pendulum type
· Select the most suitable shape from a variety of drive rods according to the shape and operation of the workpiece
· ...
|
|
Omron/Omron C5SA/C5SB Lighted Pushbutton Switch Protection Rating: IP00
Introduction: Omron/Omron C5SA/C5SB lighted pushbutton switch protection grade: IP00, durability: more than 10 million times electrical life (rated load switch), use of ambient humidity: 35~85%RH, damping mechanism to ensure high impact resistance.
peculiarity
The backlight brings uniform, ...
|
|
Omron 1ZAP2/1VAP2 Door Switch PTI (Leakage Performance) 175
Introduction: Door switch with built-in standard type switch, long service life, PTI (leakage performance) 175, ambient temperature -25~ 80 ° (no icing, condensation).
peculiarity
Installed in electrical facilities, equipment and other door opening and closing parts, can reliably prevent accidents...
|
|
The ORMON proximity switch EE-SX671 has a response frequency of 1kHz
Features:
Operation mode ON when shading and ON when light is in (switchable type)
High-speed response with a response frequency of 1kHz
The light entry indicator is clear for easy operation confirmation
The power supply voltage is DC5 - 24V wide range
Equipped with a light inlet when shading ...
|
|
Omron A7PS/A7PH DIP Switches The maximum contact resistance is 300mΩ
Introduction: Omron/Omron A7PS/A7PH dip switch is a dust-proof, easy-to-use, setting switch with large display characters, vibration resistance: 10~55Hz, 1.5mm double amplitude, more than 2 hours.
peculiarity
The simple press mechanism and the large easy-to-view digital display make for ...
|
|
Omron D5B Mechanical Contact Switch Degree of protection: IP67
Introduction: The Omron D5B mechanical contact switch is ideal for inspecting objects from multiple directions, with high precision, and robots. Protection level: IP67, allowable operating speed: 5~500mm/s.
peculiarity
Adopt a slow-acting switching mechanism.
Gold-plated contacts, capable of opening ...
|
|
Omron A7CN / A7CN-L DIP Switch Continuous current carrying: 1A
Introduction: Omron/Omron A7C series miniature DIP switch is a new lineup of the brand, contact resistance: maximum 200mΩ, maximum operating force: 4.41 N or less.
peculiarity
This series includes all locking types to prevent accidental operation.
parameter
This article introduces the Omron/...
|
|
OMRON Switching Power Supply S8VK-C24024 Power: 240W
Features:
Cost-saving, single-phase power supply
Common input and for global applications
Safety standards
Small, space-saving design
· Universal input for global applications:
AC100-240V(AC85-264V
Can use DC input: DC90-...
|
|
OMRON switches WLCA12-N BY OMR IP67 rated
Product Introduction
Use a combination of environment and purpose
A variety of head shapes are available
· Various head shapes such as rotary pendulum type, plunger type, tentacle type, fork locking pendulum type
· Select the most suitable shape from a variety of drive rods according to the shape and operation of the workpiece
...
|
|
Omron Safety Limit Switch D4N Insulation Resistance: 100MΩ or more
Features:
Models with 1NC/1NO, 2NC, 2NC/1NO and 3NC contact styles are available. (MBB contact slow-acting type is also available.) ）
In addition, the M12 connection type is available, which is more labor-saving and easier to replace.
Can be used for standard loads and tiny ...
|
|
OMRON Limit Switches HL-5030 BY OMR 2NO+2NC
Product Introduction
Small, low-cost, high-practicability limit switches
· The head, shell and cover are equipped with a sturdy surface to maintain strength.
· The unique head structure provides smooth operation of the large OT.
· Catheter opening design for easy wiring.
· Printing equipment ...
|
|
Omron D4F Miniature Safety Limit Switch Rated Frequency: 50/60Hz
Introduction: Omron D4F small safety limit switch rated frequency: 50/60Hz, operating speed: mm/s~0.5m/s, ultra-small limit switch (4 contacts) with forced disconnect structure, protection grade: IP67.
peculiarity
Ultra-miniature limited ...
|
|
OMRON U-Proximity Sensor EE-SX670 Protective structure: IP50
Features:
Operation mode ON when shading and ON when light is in (switchable type)
High-speed response with a response frequency of 1kHz
The light entry indicator is clear for easy operation confirmation
The power supply voltage is DC5 - 24V wide range
Equipped with a light inlet when shading ...
|
|
Omron D41G High Code Guard Lock Safety Door Switch Latching force: 30N
Introduction: Omron D41G High Coding Guard Lock Safety Door Switch Latching Force: 30N, Rated Insulation Voltage (Ui) DC32V, Rated Short-Circuit Current: 100A, D41 Series helps you create safety precautions that meet ISO14119 standards.
peculiarity
No tampering ...
|
|
Omron Switching Power Supply S8VK-X has no cooling fan
peculiarity
With communication function, size**small*1
Excellent environmental resistance contributes to the stable operation of the plant
Support a wide range of communication methods in various fields
The status is displayed on the body monitor, which is more convenient to use in various scenarios
The fuselage monitor adopts a clear ...
|
|
Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more
Introduction: Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more, rated frequency: 50/60Hz, in line with EN115-1, EN81-20 and EN81-50 safety contact requirements (slow action type only).
peculiarity
The product contains a variety of products with 1NC/1NO, 2NC, 2NC/...
|
|
Omron Safety Limit Switch D4B-□N Ambient humidity: 95% or less
peculiarity
A new force-open action device (NC contact only) has been added to disconnect the contact in the event of a fault such as a contact blowing.
The safety of the pendulum setting ensures that a gear meshing device is adopted between the action position indicator panel and the pendulum.
Equipped with the ability to ...
|
|
Omron A165E E/E Emergency Stop Switch PTI (Tracking Characteristics): 175
Introduction: Omron/Omron A165E Emergency Stop Switch PTI (Tracking Characteristics): 175, Ambient humidity: 35%~85%, in accordance with EN 60947-5-5 standard, equipped with a safety lock to prevent abuse.
peculiarity
The forced disconnect structure can be used to force the ...
|
|
Contact
working hours
