Introduction: Panasonic/Panasonic Welding Machine 350FR2 has Standard mode, which is suitable for the usual welding needs, in this mode, the welding parameters can be set freely and finely according to the welding process and operation habits; The unified adjustment method is adopted, and the welding voltage is automatically matched when the current is adjusted. Fast modeWelding expert mode customized for fast spot welding, short weld fast welding, this mode is characterized by fast arc strike, fast welding. The switch is pressed to weld, and the switch is stopped when it is released, with high welding cycle time and high operation efficiency.
Features:
Degree of protection: IP23S
Dimensions (W×D×H): 372×575×632 mm
Weight: 54 kg
Switching between current display and wire feeding speed display (350FR2/500FR2).
Set the upper and lower limits (percentage) of current and voltage, and an alarm signal will be output when the range is exceeded
The arc shape (hardness) can be adjusted freely
Product parameters
Input voltage: AC three-phase 380 V
Rated input capacity: 13.5 kVA
Rated input power: 13.0 kW
Input power frequency: 50/60 Hz
Output Characteristics: CV (Constant Voltage Characteristics)
Rated output current: DC 350 A
Rated output voltage: 31.5 V
No-load voltage: DC 70 V
Output current range: DC 40 – 430 A (resistive load output capability)
Output voltage range: 16 – 35.5 V (resistive load output capability)
Rated load duration: 60%
Control mode: IGBT inverter control
Cooling method: forced air cooling
Applicable wire type: solid/flux cored
Welding method: separate/unified
Applicable wire diameter
Solid 0.8/1.0/1.2 mm
Flux cored carbon steel: 1.2/1.4 mm
Timing: welding/welding—arc closing/initial stage—welding—arc closing/spot welding
Shielding gas
CO2 welding CO2: 100 %
MAG welding Ar: 82 %, CO2: 18 %
MIG Welding Ar:98%, CO2:2.5%
Advance aeration time: 0.2 s
Lag downtime: 0.5 s
Spot welding time: 0.3–10.0 s continuous adjustment
Insulation class: 155 °C for main transformer (200 °C for reactor)
This article introduces the Panasonic/Panasonic Welding Pole 350FR2 products, if you are interested in Panasonic/Panasonic Welding Machine, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy. Safety relay products, if you are interested in Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Panasonic/Panasonic tungsten TIG welding machine 300BP4 rated input power 10 kW
Introduction: Panasonic/Panasonic tungsten TIG welding machine 300BP4 AC output frequency from 30Hz to 400Hz stepless adjustment. The higher the frequency, the higher the arc stiffness, the easier it is to add wire, and the smoother the weld. It can obtain an arc with high energy density, and the weld seam is fused quickly, which improves the welding speed. At the same time make ...
|
|
Panasonic/Panasonic tungsten TIG welding machine 315TXL3 IGBT inverter control
Introduction: Panasonic Robot Tungsten TIG Welding Machine 315TXL3 has rich waveform control, adapts to a variety of welding needs, excellent manual welding performance, equipped with remote control interface, with automatic wire adding device, built-in anti-electric shock function. Other protection and convenience functions: abnormal indicator/temperature ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 400TX3 Power 95%
Introduction: Panasonic tungsten argon arc welding machine 400TX3 current and voltage digital display, preset parameters accurate and convenient. There are three functions of DC TIG welding/DC pulse TIG welding/DC manual welding, which are widely used. There are two types of settings: low frequency (0.5-30Hz) and medium frequency (10-500Hz).
|
|
Panasonic/Panasonic Welding Machine 500GL5 has a rated output voltage of 39V
Introduction: Panasonic/Panasonic 500GL5 is equipped with root welding function as standard, which is suitable for foundation laying and large gap welding. Deepen deep arc penetration function can be extended, applied to thick plate large penetration penetration welding and thick plate root welding, GL5 welding machine also has a wealth of process software packages for purchase, very ...
|
|
Panasonic/Panasonic Electrode Arc Welder 630SS3 Rated output current 630A
Introduction: Panasonic/Panasonic electrode arc welding machine 630SS3 uses ASIC to generate trigger pulses, which ensures the stable and reliable operation of the main circuit. It is equipped with a balance adjustment function to avoid the imbalance of the input waveform caused by abnormal input power supply. Variable voltage intelligent control ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 400TX3 Power Factor 0.95
Introduction: Panasonic tungsten argon arc welding machine 400TX3 current and voltage digital display, preset parameters accurate and convenient. It is equipped with two pulse functions: low frequency (0.5-30Hz) and medium frequency (10-500Hz). The low-frequency pulse is suitable for all positions of medium plates, thick plates, and tubular plates of various materials.
|
|
Panasonic/Panasonic Welding Machine 500FR2 Weight 60kg
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 500FR2, the analog interface can be used with the power supply of the special machine to achieve automatic welding. The expandable IoT module can be upgraded to an IoT welder, connected to the Panasonic iWeldCloud system, and the device can be managed through the App, and the remote service from Tangshan Panasonic can be obtained.
|
|
Panasonic/Panasonic tungsten argon arc welding machine 300WX4 three-welding method
Introduction: Panasonic tungsten argon arc welding machine 300WX4 has a variety of welding modes such as AC TIG, DC TIG, MIX TIG, etc., and the AC welding arc has three arc functions of flexible, rigid and hybrid for selection. The MIX TIG method welds aluminum, which improves the ...
|
|
Panasonic/Panasonic cutting machine 100PF3 Rated input voltage AC three-phase 380 V
Introduction: Panasonic/Panasonic cutting machine 100PF3 has a high arc success rate, fast cutting speed, small cutting amplitude, good smoothness of the cutting surface, less hanging slag on the surface, and small deformation of the thin plate. Equipped with a cutting navigation function, the appropriate specification is automatically determined according to the selected material/plate thickness. Electrode life ...
|
|
Panasonic/Panasonic tungsten TIG welding machine 400BW power supply frequency 50/60 Hz
Introduction: Panasonic Tungsten TIG Welding Machine 400BW is an all-digital pulsed DC TIG arc welding machine with adjustable arc stiffness and pulse arc, new appearance, visual intelligent design, intelligent navigation, high scalability and other special functions. Chinese and English operation interface, equipped with online ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 350GL5 has a rated input capacity of 17.6kVA
Introduction: Panasonic tungsten argon arc welding machine 350GL5 has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, standard root welding function, suitable for bottom and large gap welding. Expandable Deepen deep arc transmission function for thick ...
|
|
Panasonic/Panasonic Welding Machine 500KR2 Rated input power 28.1kW
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 500KR2 without remote control cable design, which reduces wire disconnection failures and improves mobility. Unified/individually adjusted conversion function. It is easy to operate and easy to maintain. Self-developed anti-main transformer burning loss technology and multiple protection functions. Structural design ...
|
|
Panasonic/Panasonic 315TXL3 Phase loss protection
Introduction: Panasonic/Panasonic tungsten argon arc welding machine has rich waveform control, which can adapt to a variety of welding needs. Stable welding is also possible even at an output current of 4A. Excellent manual welding performance, with automatic wire feeding device, built-in anti-electric shock function. Other Protection and Convenience Features: Anomaly Indicator ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 300WX4 Insulation Class H
Introduction: Panasonic tungsten argon arc welding machine 300WX4 has a variety of welding modes such as AC TIG, DC TIG, MIX TIG, etc., and the AC welding arc has three arc functions of flexible, rigid and hybrid arc for selection. The MIX TIG method welds aluminum, which improves the ...
|
|
Panasonic/Panasonic Welding Gear/Polar Gas Shielding Machine 350GP5 Rated output current 350 A
Introduction: Panasonic/Panasonic Welding Pole 350GP5 is suitable for welding carbon steel, stainless steel and aluminum with different wire feeders, welding guns and shielding gases. Standard built-in IoT module and analog communication interface, expandable digital interface, as automatic welding machine and robot power supply ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 300BP4 DC Hand Welding Function
Introduction: Panasonic/Panasonic tungsten TIG welding machine 300BP4 AC output frequency from 30Hz to 400Hz stepless adjustment. The higher the frequency, the higher the arc stiffness, the easier it is to add wire, and the smoother the weld. At the same time, it is easy to control fillet welding, welding of different thicknesses, and circumferential welding. Tool...
|
|
Panasonic/Panasonic Welding Machine 350GL5 No load current 80V
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 350GL5 has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, and is equipped with root welding function as standard, suitable for foundation laying and large gap welding. Expandable Deepen arc penetration, applied to ...
|
|
Panasonic/Panasonic MIG/MAG welder 500GP5 IP23S protection
Introduction: Panasonic/Panasonic Welding Machine 500GP5 Advanced Multi-functional Welding Machine, welding power supply has a built-in welding expert library of a variety of materials, with different wire feeding devices, welding guns and shielding gases, suitable for welding carbon steel, stainless steel and aluminum. Standard built-in IoT module and analog ...
|
|
Panasonic/Panasonic Welding Machine 500GL5HV weighs 110 kg
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 500GL5HV has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, and is equipped with root welding function as standard, suitable for foundation laying and large gap welding. The GL5 welder is also available in a wide range of process software packages for ...
|
|
Panasonic/Panasonic Welding Machine 630FR Overvoltage and Under Voltage Protection
Introduction: Panasonic/Panasonic Welding Machine 630FR Standard Mode (Default Mode at the Factory) This mode is suitable for the usual welding needs, in this mode, the welding parameters can be set freely and finely according to the welding process and operation habits; Adopt a unified adjustment method, ...
|
|
Contact
working hours
