Introduction: Panasonic/Panasonic Welding Machine 500GP5 Advanced Multi-functional Welding Machine, welding power supply has a built-in welding expert library of a variety of materials, with different wire feeding devices, welding guns and shielding gases, suitable for welding carbon steel, stainless steel and aluminum. The standard built-in IoT module and analog communication interface, which can be expanded with digital interface, can be used as a power supply for automatic welding machines and robots.
Features:
Main welding methods: CO2, MAG, MAG pulse, MIG, MIG pulse.
Main welding materials: carbon steel, stainless steel, aluminum.
Construction process:
Arc starting, burnback control IBC
Pulse fixed arc length controls ALC
Root
High and low pulses HL-Pulse
Stainless steel pulse S-Pulse
Hybrid pulse MUP
Welding process software
Degree of protection: IP23S
Dimensions (L×W×H): 1080×570×1040 mm (including cooling system and cylinder trolley)
Weight: 133 kg
Product parameters
Input voltage: AC three-phase 380 V
Rated input capacity: 29.9 kVA
Rated input power: 23.9 kW
Input power frequency: 50/60 Hz
Output Characteristics: CV (Constant Voltage Characteristics)
Rated output current
Pulse None: DC 500
The pulses are: DC 400
Rated output voltage: 39 V
No-load voltage: DC 80 V
Output current range
Pulse none: DC 60 - 500 A
Pulses are: DC 60-400 A (resistive load output capability)
Output voltage range
Pulse None: 17-39
Pulses: 17 – 34 V (resistive load output capability)
Rated load duration: 60%
Control mode: IGBT inverter control
Welding condition storage: 100 channels can be called welding specification storage
Cooling method: forced air cooling
Applicable wire type: flux cored/solid core
Normative Regulation: Separate/Unified
Welding method: CO2/MAG/pulsed MAG/pulsed MIG
Applicable wire diameter
Soft aluminum/duralumin: 1.2/1.6 mm
Flux cored carbon steel: 1.2/1.4/1.6 mm
Flux cored stainless steel: 1.2 mm
Solid: 0.8/1.0/1.2/1.4/1.6 mm
Timing: welding/welding—arc closing/initial stage—welding—arc closing/spot welding
Shielding gas
CO2 welding: CO2: 100 %
MAG welding Ar: 80 %, CO2: 20 %
MIG welding Ar:98 % , O2:2%
MIG Aluminum Welding Ar: 100%
Gas inspection time: 60 s (maximum gas inspection time)
Advance aeration time: 0–5.0 s continuous adjustment (0.1 s increments)
Lag downtime time: 0–5.0 s continuous adjustment (0.1 s increments)
Spot welding time: 0.3–10.0 s Continuous adjustment (in 0.1 s increments)
Insulation class: 155 °C for main transformer (200 °C for reactor)
This article introduces the Panasonic/Panasonic Welding Pole 500GP5 product, if you are interested in Panasonic/Panasonic Welding Machine, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy. Safety relay products, if you are interested in Panasonic/Panasonic welding machine, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Panasonic/Panasonic tungsten TIG welding machine 300BP4 rated input power 10 kW
Introduction: Panasonic/Panasonic tungsten TIG welding machine 300BP4 AC output frequency from 30Hz to 400Hz stepless adjustment. The higher the frequency, the higher the arc stiffness, the easier it is to add wire, and the smoother the weld. It can obtain an arc with high energy density, and the weld seam is fused quickly, which improves the welding speed. At the same time make ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 400TX3 Power 95%
Introduction: Panasonic tungsten argon arc welding machine 400TX3 current and voltage digital display, preset parameters accurate and convenient. There are three functions of DC TIG welding/DC pulse TIG welding/DC manual welding, which are widely used. There are two types of settings: low frequency (0.5-30Hz) and medium frequency (10-500Hz).
|
|
Panasonic/Panasonic Welding Machine 500FD2 has a rated output voltage of 39V
Introduction: Panasonic/Panasonic Welding Machine 500FD2 adopts a quad-core processor and integrates a unique software control algorithm to achieve the best pulse waveform control welding arc is more stable. Built-in expert data for wire diameters of 1.2 and 1.6 adapts to aluminum welding from thin to thick plates. ...
|
|
Panasonic/Panasonic tungsten TIG welding machine 300WP5 rated input voltage single phase 380 V
Introduction: DC pulse TIG welding (also available DC TIG welding), AC pulse TIG welding (also available AC TIG welding), DC manual welding / AC manual welding, advanced swing reactor control, can achieve stable AC square wave output, effectively reduce the current noise during work, according to the material, ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 400TX4 Load Cycle 60%
Introduction: Panasonic tungsten argon arc welding machine 400TX4 has DC TIG, DC pulse TIG and electrode arc welding functions, when electrode arc welding, acid and alkaline electrodes can be used; Adjustable arc strike current and thrust current. In repetitive mode, the welding can be stopped by double-pressing the torch switch.
|
|
Panasonic/Panasonic tungsten TIG welding machine 400BW power supply frequency 50/60 Hz
Introduction: Panasonic Tungsten TIG Welding Machine 400BW is an all-digital pulsed DC TIG arc welding machine with adjustable arc stiffness and pulse arc, new appearance, visual intelligent design, intelligent navigation, high scalability and other special functions. Chinese and English operation interface, equipped with online ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 350GL5 has a rated input capacity of 17.6kVA
Introduction: Panasonic tungsten argon arc welding machine 350GL5 has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, standard root welding function, suitable for bottom and large gap welding. Expandable Deepen deep arc transmission function for thick ...
|
|
Panasonic/Panasonic electrode arc welder 630AT3 has a rated input capacity of 32.2kVA
Introduction: Panasonic/Panasonic electrode arc welding machine 630AT3 three-layer four-cavity structure design, the main power device, P board, switch, potentiometer, etc. are hidden in the closed cavity, which effectively avoids dust invasion. Optimized design for ambient temperatures of up to 50°C, even outdoors in direct sunlight ...
|
|
Panasonic/Panasonic Welding Machine 500FR2 Weight 60kg
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 500FR2, the analog interface can be used with the power supply of the special machine to achieve automatic welding. The expandable IoT module can be upgraded to an IoT welder, connected to the Panasonic iWeldCloud system, and the device can be managed through the App, and the remote service from Tangshan Panasonic can be obtained.
|
|
Panasonic/Panasonic Welding Machine 350GL5 No load current 80V
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 350GL5 has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, and is equipped with root welding function as standard, suitable for foundation laying and large gap welding. Expandable Deepen arc penetration, applied to ...
|
|
Panasonic/Panasonic tungsten TIG welding machine 200BL3 Rated input voltage Single-phase 220 V
Introduction: Panasonic tungsten argon arc welding machine 200BL3 through full digital control, can easily achieve precise welding condition setting, reproduction and management, portable design, all for the firm sheet metal body structure, weight only 10KG, can be carried like an ordinary briefcase, with ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 300TSP Thyristor Control
Introduction: Panasonic tungsten argon arc welding machine 300TSP DC pulse TIG welding / DC TIG welding / DC manual welding three operation methods. Constant current control, welding current can also be stable when external conditions change. Using IC and thyristor technology, the instantaneous arc striking rate is close to 100%. Even if the high ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 400TX3 Power Factor 0.95
Introduction: Panasonic tungsten argon arc welding machine 400TX3 current and voltage digital display, preset parameters accurate and convenient. It is equipped with two pulse functions: low frequency (0.5-30Hz) and medium frequency (10-500Hz). The low-frequency pulse is suitable for all positions of medium plates, thick plates, and tubular plates of various materials.
|
|
Panasonic/Panasonic Welding Machine 350GS5 IGBT Inverter Control
Introduction: Panasonic 350GS5 Ultra-low spatter is the main feature of the GS5 welder, and the use of CO2 gas can also achieve low spatter, making the GS5 welder have outstanding advantages in terms of high performance and cost power. The low spatter also allows the slag cleaning procedure to be omitted. Furthermore...
|
|
Panasonic/Panasonic Welding Gear/Polar Gas Shielding Machine 350GP5 Rated output current 350 A
Introduction: Panasonic/Panasonic Welding Pole 350GP5 is suitable for welding carbon steel, stainless steel and aluminum with different wire feeders, welding guns and shielding gases. Standard built-in IoT module and analog communication interface, expandable digital interface, as automatic welding machine and robot power supply ...
|
|
Panasonic/Panasonic Welding Machine 500GL5HV weighs 110 kg
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 500GL5HV has good welding performance for carbon steel and stainless steel materials, can achieve light spatter short circuit transition under low current, and is equipped with root welding function as standard, suitable for foundation laying and large gap welding. The GL5 welder is also available in a wide range of process software packages for ...
|
|
Panasonic/Panasonic Welding Machine 500GL5 has a rated output voltage of 39V
Introduction: Panasonic/Panasonic 500GL5 is equipped with root welding function as standard, which is suitable for foundation laying and large gap welding. Deepen deep arc penetration function can be extended, applied to thick plate large penetration penetration welding and thick plate root welding, GL5 welding machine also has a wealth of process software packages for purchase, very ...
|
|
Panasonic/Panasonic Welding Machine 400GE2 No-load voltage 72V
Introduction: Panasonic/Panasonic Melting Pole Gas Shielding Welding Machine 400GE2 Full digital technology, full digital power supply with digital wire feeder, to achieve high-quality welding in the full current range. The wire feeder adopts four-wheel dual drive, and the wire feeding is stable and powerful. 32 sets of welding specifications can be stored and called. With a robot ...
|
|
Panasonic/Panasonic Tungsten TIG Welding Machine 300BP4 DC Hand Welding Function
Introduction: Panasonic/Panasonic tungsten TIG welding machine 300BP4 AC output frequency from 30Hz to 400Hz stepless adjustment. The higher the frequency, the higher the arc stiffness, the easier it is to add wire, and the smoother the weld. At the same time, it is easy to control fillet welding, welding of different thicknesses, and circumferential welding. Tool...
|
|
Panasonic/Panasonic 315TXL3 Phase loss protection
Introduction: Panasonic/Panasonic tungsten argon arc welding machine has rich waveform control, which can adapt to a variety of welding needs. Stable welding is also possible even at an output current of 4A. Excellent manual welding performance, with automatic wire feeding device, built-in anti-electric shock function. Other Protection and Convenience Features: Anomaly Indicator ...
|
|
Contact
working hours
