Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of 26PC pressure sensors, 24PC SMT pressure sensors offer SMT functionality in a small size. The smaller size reduces the sensor's footprint on the PCB, thus reducing the size of the PCB. The 24PC SMT works in conjunction with other SMT components on the PCB to help reduce installation costs and avoid secondary operations. The sensor features a Wheatstone bridge structure, piezoresistive technology, and proportional output, which makes it simple in design, flexible in application, and easy to manufacture.
Features:
Aligned pins improve positioning accuracy
Small package size (less than half the size of a 26PC) and low profile surface mount
3,18 mm [0.125 in] diameter, pick-up function for automatic placement machines
Maximum peak reflow temperature: 260°C [500°F]
Functions such as gauge, vacuum, differential pressure, and wet/wet differential pressure sensing are all in the same package
True wet/wet differential pressure sensing
The 20PC Series features application-proven resilient connectivity
Temperature compensation
Endpoint calibration
The sensor consists of only five components
Elastomer construction
Wide operating temperature range: 40°C to 85°C [-40°F to 185°F]
Product parameters
Series Name: 24PC
Signal conditioning: non-amplified
Pressure Range: ±1 psi
Output: Analog
Response time: 1 ms maximum
Package Type: SMT
Full scale range: 45 mV typical
Input resistance: 4.5 kOhm min., 5.0 kOhm typical, 5.5 kOhm max
Shock: Tested for 150 g certification
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Media compatibility: Limited to media that do not cause damage to polyetherimide, silicone, fluorosilicone, silicone, EPDM, and neoprene seals.
Measurement Type: Wet/Wet Differential Pressure
Temperature Compensation: None
Supply voltage: 10 Vdc typical
Output calibration: None
Interface Type: Straight
Sensitivity: 45 mV typical
Linearity: 0.15% typical range, 0.4% maximum volume
Output resistance: 4.5 kOhm min, 5.0 kOhm typical, 5.5 kOhm max
Vibration: MIL-STD-202 Method 213 (150 g half sine 11 ms)
Storage temperature: -55°C to 100°C [-67°F to 212°F]
This article introduces the Honeywell/Honeywell pressure sensor 24PC01SMT pressure ±1psi products, if you are interested in Honeywell/Honeywell sensor, also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Honeywell Sensor DPT5000U1-B
HONYWELL DPT5000U1-B Sensors DPT Series Air Differential Pressure Sensors
Measuring range: 0-5000
Output signal: 0-10V
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover ...
|
|
Honeywell JSM802ED3C2 Cylindrical Sensors JSM8 Series
honeywell Honeywell Sensors JSM802ED3C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: ...
|
|
Honeywell/Honeywell pressure sensor RSCDRRI002NDSE3
Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. Through a 24-bit analog-to-digital converter equipped with integrated EEPROM, it is possible to control sensor offset, sensitivity, temperature, etc.
|
|
Honeywell DPT0500U2-B DPT Series Air Differential Pressure Sensors
Honeywell Sensors DPT0500U2-B DPT Series Air Differential Pressure Sensors
Accuracy: ±1.0%FS
Supply voltage: 12---30Vac/Vdc
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy ...
|
|
Honeywell Industrial Pressure Sensors 19 mm Series
Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals
Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...
|
|
Honeywell/Honeywell RTD sensors
Platinum or silicon, thick film and laser-trimmed sensors provide accurate, stable and fast linear output. Wide temperature range.
Platinum-based RTDs are laser-fine-tuned for accuracy and flexibility. It is used to provide stable and fast linear output. RTD temperature sensors are accurate and interchangeable ...
|
|
Honeywell/Honeywell pressure sensor HSCDAND001BASA3
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell Industrial Gas Sensors AQ3 Series
High resolution, low lower detection limit. Customized low-noise circuit boards achieve high accuracy in ppb levels.
Reliable gas sensor to detect a wide range of gases: carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2) are mainly used for environmental monitoring, ...
|
|
Honeywell/Honeywell pressure sensor ABPDANN005PG2A3
Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...
|
|
Honeywell/Honeywell pressure sensor TSCDJJN001PDUCV
Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...
|
|
Honeywell Industrial Gas Sensor 3 Series
The Series 3 is City Technology's oldest family of gas sensors. A wide range of sensors have evolved from this series and are available with 4mA to 20mA and mV transmission boards. The Series 7 is an upgrade to the series.
This article introduces the Honeywell/Honeywell ...
|
|
Honeywell/Honeywell flow sensor AWM3100V weight 10.8g
Description: AWM3000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +200 SCCM; Straight port type. Like the AWM2000 Series, the Whiston Twin Bridge controls gas flow measurement. AWM3000 series is enlarged; Therefore, the series can be used to increase the ...
|
|
Honeywell/Honeywell pressure sensor NBPDPNS001PGUNV
Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...
|
|
Honeywell/Honeywell flow sensors AWM43300V manifolds
Introduction: AWM40000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +1000 SCCM; Interface Type: Manifold. The AWM40000 series of air flow sensors is based on proven micro-bridge technology, including unamplified sensor-only devices and amplified signal designs.
|
|
Honeywell Humidity Sensor HIH6021-021-001
Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel.
Give birth...
|
|
Honeywell Sensor DPT0500U1-B
Honeywell Sensors DPT0500U1-B DPT Series Air Differential Pressure Sensors
Measuring range: 0-500
Output signal: 0-10V
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use
|
|
Honeywell/Honeywell Pressure Sensor 24PCAFA2G Analog
Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...
|
|
Honeywell/Honeywell Humidity Sensor HIH-5030-001 3.3Vdc
Description: The HIH-5030/5031 series of low-voltage humidity sensors can operate in low-voltage environments as low as 2.7 V DC and are ideal for battery-powered systems with a typical voltage of 3 V DC. The 5030/5031 complements our existing 5 V DC SMD (Surface Mount ...
|
|
Honeywell Industrial Pressure Sensors BPS Series
By detecting the pressure change in the battery pack, it can determine whether the battery pack has thermal runaway and output an early warning signal.
Honeywell's battery safety early warning sensor developed by unique technology can monitor the abnormal state of the battery in the system at the first time, effectively improve the safety of the whole vehicle, and maximize the safety of the whole vehicle.
|
|
Honeywell/Honeywell pressure sensor PX3AF1BH010BSAAX
Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...
|
|
Contact
working hours
