Fluke/Fluke 561 Infrared & Contact Thermometer Single-point laser

Introduction: Fluke 561 infrared and contact thermometer integrates the temperature measurement functions required by technicians in industrial, electric power, HVAC industries, and has both infrared and contact temperature measurement methods, and one can be used for more than one piece. It's fast, efficient, and easy to use, saving you valuable time and effort. At the same time, you have the flexibility to choose between contact testing and infrared temperature measurement if you need it. The infrared thermometer can measure heat, motion, live, and inaccessible objects in an instant, and can be used to inspect motors, insulation, circuit breakers, radiant heat, pipes, connection point corrosion, line faults, and to scan HVAC and other hard-to-reach objects without the need for a ladder. When measuring pipes, you can use the handy Velcro® pipe probe or use the standard K-type mini-connector thermocouple probe you have in hand to measure overheating or internal temperature.
Fluke/Fluke561

Benefits:

Infrared thermometers can measure not only at close range, but also at a distance, without the use of a ladder at all.

The contact temperature measurement feature is compatible with all standard miniature connectors, Type K thermocouples, so you don't need to purchase a separate thermocouple for them, protecting your investment.

Velcro® pipe probes can be used for superheat, subcooling, and other contact and non-contact temperature measurements.

Single-point laser aiming measurements

The temperature measurement range is -40 °C to 550 °C (-40 °F to 1022 °F) and can be used in most industrial and residential applications.

The emitted energy can be easily adjusted (high, medium, low) for more accurate measurement of pipes and other materials with very smooth surfaces.

Lightweight (only 12oz/340g) makes it easy to carry

It's easy to use the fee

High efficiency – no need to turn off the device when performing infrared measurements.

The MIN, MAX, AND DIF functions help you quickly find problems

Fault scans are fast and efficient, no matter how big or small they are.

Product data

General Technical Specifications
temperature	-40 to 550 °C (-40 to 1022 °F)
Display resolution	0.1 °C (0.1 °F) of reading
D:S (Measurement Point Distance Ratio)	12:1
Quick emissivity selector	It can be adjusted between three settings:
	Low (0.3), Medium (0.7), High (0.95)
Display accuracy [Assuming an ambient operating temperature of 23°C (73°F) to 25°C (77°F)]	±1.0 % of reading ±1 % of reading or ±1 °C (±2 °F), whichever is greater, and ±1 °C (±2 °F) ± 0.1°/1° below 0 °C/32 °F
Response time	<500 mSec (95% of reading)
repeatability	± 0.5% of reading or ±1 °C (±2 °F), whichever is greater
Spectral response	8 μm to 14 μm
Laser aiming	Single-point laser
Laser off	The laser is turned off when the ambient temperature exceeds 40 °C (104 °F).
Laser power	Class 2 (II) Operations; Output <1mW with a wavelength of 630-670 nm
relative humidity	10% to 90% RH, non-condensing, < 30 °C (86 °F)
Power supply as well as battery life	2 AA type batteries (alkaline or nickel-chromium)
Battery life	12 hours
The data shows that it is maintained	7 seconds
Backlit display	Yes, dual-temperature LCD (current temperature and MAX/MIN/DIF/KTC temperature), low battery indicator, F/C unit indicator, and scan/hold options
Operating temperature	0 °C to 50 °C (32 °F to 120 °F)
Storage temperature	-20 °C to 65 °C (-25 °F to 150 °F)
Maximum and minimum temperature and temperature difference	Yes
Mini connector type K thermocouple input	Yes, compatible with industry standard K-probes with miniature connectors. Displays the thermometer temperature range.
Type K thermocouple fabric hook-and-loop fastener tube probe	Yes, temperature range from 0 °C to 100 °C (32 °F to 212 °F) with an accuracy of ±2.2 °C (±4 °F)
A guide to heating, ventilation, air conditioning, and refrigeration (HVAC) measurements	Yes

This article introduces the Fluke 561 infrared and contact thermometer, if you are interested in the Fluke/Fluke thermometer, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

Fluke/Fluke 561 Infrared & Contact Thermometer Single-point laser

Sections viewed

Contact

working hours