FLUKE 719 Portable Automatic Pressure Calibrator Weight 912g

Summary: The Fluke 719 Portable Automatic Pressure Calibrator makes pressure calibration easy with a new built-in electric air pump! You can now use one-handed operation to calibrate and test your pressure equipment quickly and easily, saving valuable time. The Fluke 719 avoids over-pressurization with programmable pump limit settings that can be set to a "pressure value." The unique cleaning port design reduces the probability of air pump failure, which is easier to clean and does not require maintenance.
Fluke/FLUKE719

Product Advantages:

Portable pressure calibrator with electric air pump for pressure calibration with one hand

Pressure measurement uncertainty of only 0.025%

Up to 0.015% accuracy of mA-level signal measurements and signal sources

High-precision pressure adjustment vernier

Exhaust valve with adjustable deflation speed for easy pressure adjustment

The pressure calibrator has ideal performance for high-precision transmitter calibration

207KPa (30 PSI) and 689KPa (100 PSI) pressure ranges

Programmable air pump limit settings:

Prevent excessive stress

The target pressure pumped can be programmed by the user

The pressure calibrator expands the pressure range with any of the 29 700Pxx pressure modules

Source mA at the same time as the pressure measurement to test the valve and I/P transmitter

Simulate mA signals to troubleshoot 4-20 mA loops

Pressure switches can be tested with a built-in switch test function

A 24V loop power supply is used to power the transmitter during the measurement

Equipped with a cleaning port, it reduces the chance of the air pump failing

Product parameters

Storage temperature: -30 °C to 60 °C

Operating temperature: -10 °C to 55 °C

Relative humidity:

95% (-10 °C to 30 °C)

75% (30 °C to 40 °C)

45% (40 °C to 50 °C)

35% (50 °C to 55 °C)

Impact: 1 meter drop test

Safety level: CAN/CSA C22.2 No.1010.1:1992

Electromagnetic compatibility (EMC): EN50082-1:1992 and EN55022:1994 Class B

Dimensions (H x W x D): 60 x 87 x 210 mm

　　（2.19 x 3.41 x 8.28 in）

Weight: 912 g (2 lb)

Batteries : Two 9 V alkaline batteries

Battery life: 12 hours (12 mA inflow to 500 Ω load) for 200 pump cycles at 100 psi and 500 pump cycles at 30 psi

Technical Specifications:

　　Fluke-719 30G

Ranges: -12 to 36 psi, -850 mbar to 2.4 bar

Resolution: 0.001 psi, 0.1 mbar

Precision:

0.025 % of the range, 6 months

0.035 % of the range, 1 year

　　Fluke-719 100G

Ranges: -12 to 120 psi, -850 mbar to 8 bar

Resolution: 0.01 psi, 1 mbar

Precision:

0.025 % of the range, 6 months

0.035 % of the range, 1 year

　　mA

Range: 0 to 24 mA

Resolution: 0.001 mA

Accuracy: 0.015% of reading + 2 counts

Maximum load: 1000 Ω, 750 Ω ohm in HART mode

Loop powered

Range: 24 VDC

Resolution: N/A

Accuracy: ±10%

Pump parameters

MAXIMUM BUILD PRESSURE: 120 PSI (8 BAR) (100 psi TYPE)

Pumping :

Less than 15 seconds at -30psi¹

Less than 45 seconds at -100psi¹

1. With 1 m 1/8 in test hose

Number of pump cycles between overhauls: 5000

Total pump life: 20,000 calibration cycles

This article introduces the Fluke/Fluke 719 portable automatic pressure calibrator products, if you are interested in the Fluke 719 portable automatic pressure calibrator, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

FLUKE 719 Portable Automatic Pressure Calibrator Weight 912g

Sections viewed

Contact

working hours