Pressures up to 7MPa are automatically generated and regulated
• Replaceable pressure control module
• Rugged and portable, weighing < 5kg
• Built-in test template, one-click calibration
• HART communication
• Pressure leak test
• Automatic fine-tuning of pressure, automatic pressure replenishment and stabilization
• Lithium batteries can be quickly replaced
• Quick pressure relief valve with silencer
• Optional quick-connect portable manifold
•Adapt to 750P series pressure module to extend the pressure measurement range
• The 720RTD probe measures temperature
• Bright dual/triple-channel color graphical display (pressure/current or voltage/external module/720RTD)
• Rugged, portable design with a 3-year standard warranty
Pressures up to 7MPa (70 bar, 1000psi) are automatically generated and controlled. Enter the pressure and the 729Pro will automatically pump up to the desired pressure. Fill out the test template and the 729Pro will automatically pump up and record multi-point pressure calibration tests.
Use defined templates to easily document the calibration process of transmitters and switches. Type the start and end test pressures and the number of test points. The 729Pro can perform additional operations based on the recorded pressure applied at each test point, the measured mA current, and the error % error. The bright, color-coded graphical display highlights out-of-tolerance test results in red.
Pluggable replaceable pressure control module. The pressure output range can be switched freely to achieve range matching at a small economic cost.
Quick replacement of lithium batteries. On-site calibration often delays the progress of work due to insufficient power, and a calibrator that can replace the battery can solve the problem. The 729Pro lithium battery can be charged alone or with the main unit, and it also has a power display function, which can confirm the power level before installation. At the same time, the knob cover is easy to remove and can be replaced without any tools.
The HART communication enables mA output adjustment to the applied value and pressure zero correction of the HART pressure transmitter. You can also easily perform configuration tasks, such as changing the transmitter label, unit of measurement, and range. Other supported HART commands include setting a fixed mA output for troubleshooting, reading device configuration parameters, and reading device diagnostic data.
With a rugged portable design and a 3-year warranty, the 7MPa pressure output capacity weighs only 4.9kg. The large-range pressure calibration no longer needs to be limited by size and space, and you can go to the site as you like.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the FLUKE 729Pro4M automatic pressure calibrator product, if you are interested in Fluke/Fluke products, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Fluke/Fluke 393 FC CAT III 1500 V True RMS Clamp Meter with iFlex Probe
The 393 FC CAT III 1500V True RMS Clamp Meter with iFlex Probe is designed for technicians working in high-voltage DC environments (solar arrays, wind energy, electrified railways, uninterruptible data center battery packs). The clamp gauge can measure the most ...
|
|
Fluke/Fluke BT500 Series Battery Internal Resistance Analyzer
Reduced test complexity, streamlined workflows, and an intuitive user interface make battery testing easier than ever.
It is an ideal test tool for maintenance, troubleshooting, and performance testing of individual batteries and batteries for backup battery applications
Intuitive user horizons ...
|
|
Fluke/Fluke insulated pump clamps
Fluke's quick-adjustment insulated carp pliers or water pump pliers have a higher grip and are more comfortable than conventional pump pliers of the same length. Compared to other designs, the 27 jaw adjustment steps allow for more accurate clamping of the workpiece and is less prone to slipping. The slender head and fitting section allow for easy clamping of these pump clamps ...
|
|
Fluke/FLUKE TiS45 thermal imaging camera
United States Fluke Ti450 MultiSharp multi-point focus generates images that are in focus across the camera's entire field of view
Focusing is an important aspect of thermography*, and if the image is out of focus, the data provided may be inaccurate, leading to incorrect diagnoses and serious damage.
|
|
Fluke/Fluke MultiFiber Pro Optical Power Meter
The MultiFiber Pro Optical Power Meter and Source is the only fiber tester that can test MPO fiber trunks without the use of fan jumpers. This singlemode and multimode MPO fiber testing tool takes the complexity out of the equation and makes MPO cartridges more tolerant.
|
|
Fluke 923 Hot Wire Velocity Meter
The Fluke 923 hot wire anemometer is an anemometer that can separate the display screen, and the infrared communication mode is used when the display screen and sensor are integrated, and the wireless communication mode is used when the display screen and sensor are separated. The display can be as far as 30m away from the sensor and can still be accurately read, without affecting the real-time data and ...
|
|
Fluke/Fluke H80M Protective case with magnetic pendant
Now, 80 Series users can benefit from the Fluke Magnetic Pendant System. The easy-to-clean snap-on case absorbs vibrations and protects the digital multimeter, and is designed to hang on any metal surface.
Key features:
Yellow protective case for all 80 series ...
|
|
Fluke/Fluke PQ400 Electrical Measurement Window
Use the Fluke PQ400 Electrical Measurement Window to connect a three-phase measurement device to a live panel without opening the panel door or wearing assisted personal protective equipment (PPE)1.
Strictly abide by quality standards and meet the specified requirements. Thoughtfully designed to ensure safety ...
|
|
FLUKE/FLUKE 301D BLADE PLIERS METER
The meter body is small and easy to carry, with AC and DC voltage, clamp AC current, clamp DC current measurement work, basically a meter to solve the daily maintenance work.
Key features:
The body weighs only 154g and is 16mm thick, making it thin and portable enough to fit in your pocket
10mm fine-tipped jaws, light ...
|
|
Fluke/FLUKE AC Digital Clamp Meter High Precision Clamp Multimeter Multimeter 301B
A clamp meter that allows you to handle complex lines with ease
Accuracy is applicable for one year after calibration, with an operating temperature of 18°C to 28°C and a relative humidity of 0% to 75%.
The accuracy specification is in the form of: ([% of reading] + [least significant digit value).
The jaws are as thin as 10 mm for measurement
...
|
|
Fluke/Fluke 1663 Multifunction Installation Tester
The ideal tester for hard-working professionals.
The instrument is suitable for professional users – it is fully functional, has advanced measurement functions, and is easy to use. The operation is intuitive and can be easily mastered by field staff at all levels.
The Fluke 1663 Installation Tester allows you to comply with ...
|
|
Fluke 107 Pocket Digital Multimeter Weight 200g
INTRODUCTION: THE FLUKE/FLUKE 107 DIGITAL MULTIMETER IS DESIGNED TO MEET THE NEEDS OF YOUR WORK! This digital multimeter is designed to be operated in the palm of your hand, regardless of your workplace.
Features:
Devise...
|
|
FLUKE 601 Pro SeriesXL Electrical Safety Analyzer
A variety of enclosure leakage current test points
A wide range of patient-friendly component types
Power on/off delay
DC should only be used for patient and auxiliary leakage testing
User-programmable test sequences
Manual, automatic, single-step, and computer-controlled modes
ASCII code data transfer
Can store up to 1000 ...
|
|
Fluke/Fluke 772 mAh Process Clamp Meter
Perform 4-20 mA signal measurements without disconnecting the loop and save time.
Are you wasting valuable time?
The mA measurement is performed by disassembling the line and disconnecting the loop
Call the control room to isolate the loop
Test the analog inputs/outputs on the console
Exclude people with m...
|
|
Fluke/Fluke Ti9 thermal imaging camera
Optimized for harsh operating environments, this high-performance, all-radiometric imager is ideal for troubleshooting electrical installations, electromechanical equipment, process equipment, HVAC/R equipment, and more.
Features:
Optimized design for field applications in harsh environments
Work...
|
|
Fluke/Fluke 975 Multifunction Environmental Meter Indoor Air Quality Testing
One tool, many functions.
The Fluke 975 AirMeter measurement tool combines five powerful features in one rugged and easy-to-use tool to take indoor air monitoring to the next level. With the Fluke 975, HVAC ventilation settings can be adjusted to be more optimal, ASHRA compliant...
|
|
Fluke/Fluke AIRCHECK G2 Wireless Network Tester
Fluke AIRCHECK G2 wireless network tester wifi
Operating Temperature: 32F to 113oF (0oC to +45oC) Note: If the internal temperature of the tester is higher than 122oF (50oC), the battery will not be powered
Operating relative humidity (% RH non-condensing) 90% (50oF to 95oF; 1 ...
|
|
Fluke/FLUKE 451B Occupational Hygiene Radiation Detector
Fluke451B Occupational Health Radiation Detector Fluke, United States
Fluke 451B/451P main differences:
1. The range of 451B is larger;
2. The detectable rays of 451B include a ray higher than 4MeyV, a β-ray higher than 100MeyV, a Y-ray higher than 25MeyV, and a 451P detectable ...
|
|
Fluke/Fluke 369/CN and 369 FC/CN Microampere True RMS Leakage Current Clamp Meters
Reduce downtime - Find leakage currents without having to remove equipment from the production line
The Fluke 369 FC True RMS Leakage Current Clamp Meter helps users continuously detect, archive, record, and compare leakage current readings to prevent unplanned downtime and detect GFCI and RCD intermittent ...
|
|
Fluke/Fluke 773 mAh Process Clamp Meter
Perform 4-20 mA signal measurements without disconnecting the loop and save time.
Are you wasting valuable time?
The mA measurement is performed by disassembling the line and disconnecting the loop
Call the control room to isolate the loop
Test the analog inputs/outputs on the console
Exclude people with m...
|
|