INVT/INVT Vector Single Drive Inverter IPE300 Engineering Interface 3

Product introduction: MF10 series electromagnetic heater is a special product developed by INVT for electromagnetic heating applications, which realizes the conversion of three-phase power frequency mains into single-phase high-frequency power supply; The product adopts DSP digital control platform, develops new hardware and special software, and integrates resonant capacitors, with powerful functions and superior performance, and can be widely used in electromagnetic heating, metal processing, injection molding and other industries.

INVT/INVT IPE300

Specifications:

Description of the function		Specifications
Technical control performance	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V
	Input Voltage (V)	AC 3PH 520V(-15%)~690V(+10%) Rated voltage: 660V
	Output Frequency (Hz)	0~400Hz
	Carrier Frequency (kHz)	1.0～15kHZ
	Control mode	Space voltage vector control mode, no PG vector control mode, PG vector control mode
	Motor type	Asynchronous motors, permanent magnet synchronous motors
	Speed ratio	1:200 (no PG vector control)
	Speed ratio	1:1000 (with PG vector control)
	Speed control accuracy	±0.2% (without PG vector control),
	Speed control accuracy	±0.02% (with PG vector control)
	Fluctuations in speed	± 0.3% (without PG vector control)
	Fluctuations in speed	±0.02% (with PG vector control)
	Torque response	<20ms (no PG vector control)
	Torque response	<10ms (with PG vector control)
	Torque control accuracy	± 10% (without PG vector control)
	Torque control accuracy	± 5% (with PG vector control)
	Starting torque	0.25Hz/150% (asynchronous motor without PG vector control)
		2.5 Hz/150% (synchronous motor without PG vector control)
		0Hz/200% (with PG vector control)
	Overload capacity	Light overload application: 1 minute of overload is allowed every 5 minutes at a temperature of 40°C with an overload current of 110% Ild.
	Overload capacity	Heavy overload applications at a temperature of 40°C, an overload of 1 minute is allowed every 5 minutes, and the overload current is 150%Ihd.
Operational control performance	Frequency setting method	Digital setting, analog setting, pulse frequency setting, multi-speed operation setting, simple PLC setting, PID setting, Modbus communication setting, PROFIBUS-DP communication setting, PROFINET communication setting, ETHERCAT communication setting, etc
	Frequency setting method	Realize the combination of settings and the switching of setting channels
	Automatic voltage adjustment function	When the grid voltage changes, it can automatically keep the output voltage constant
	Dedicated features	Master-slave control, simple water supply, custom programming, motor temperature protection and other special functions for process control
	Protection features	There are more than 30 kinds of protection functions such as short circuit to ground, phase-to-phase short circuit, overcurrent, overvoltage, undervoltage, overtemperature, input phase loss, overload, overheating, output phase loss, communication failure, stall, encoder failure, etc
Peripheral interfaces	Analog inputs	2 channels, AI1: 0~10V/0~20mA, AI2: -10~10V
	Analog inputs	Resolution: no more than 20mV
	Analog output	1 channel, AO1: 0~10V /0~20mA
	Digital inputs	4 normal inputs, maximum frequency 1kHz, DC internal impedance: 10kΩ, AC internal impedance: 40kΩ
	Digital inputs	2 high-speed inputs, maximum frequency 50kHz, support quadrature encoder input, with speed measurement function
	Digital output	1 high-speed pulse output, maximum frequency 50kHz
	Digital output	1 Y-terminal open collector output
	Relay output	Two programmable relay outputs
		RO1A is normally open, RO1B is normally closed, and RO1C is common
		RO2A is normally open, RO2B is normally closed, and RO2C is common
		Contact capacity: 3A/AC250V, 1A/DC30V
	Extended interfaces	Three expansion interfaces: SLOT1, SLOT2, and SLOT3
	Extended interfaces	Expandable PG card, programmable expansion card, communication card, I/O card, etc
other	Installation:	It supports three modes: wall-mounted, flanged and floor-mounted
	Brake unit	380V 37kW (inclusive) or less standard built-in, 45~110kW optional built-in, 132kW (inclusive) and 660V full power optional external
	Operating ambient temperature	-10~50°C, derating above 40°C
	Ingress protection	IP20
	Pollution level	Level 3
	Cooling method	Forced air cooling

The company has been with the concept of "customer first", quality and service to win the market, hoping to cooperate with all sectors of society, mutual benefit and win-win, create brilliance, and work together to create a better tomorrow! In line with the concept of honest service, the company welcomes new and old customers to inquire, on-site inspection, and negotiation business.

INVT/INVT Vector Single Drive Inverter IPE300 Engineering Interface 3

Sections viewed

Contact

working hours