INVT inverter GD350-13-037G-6 protection grade IP20

Introduction: INVT inverter GD350-13-037G-6, GD350-13 series inverter realizes the integration of synchronous motor drive and asynchronous motor drive, integrates the control of different types of pumping units such as tower, beam and direct drive screw pump, and strengthens the reliability of the product and the adaptability of the environment, as well as the customized and industrialized design, with the characteristics of more optimized functions, better control performance and more flexible application.

INVT inverter GD350-13-037G-6 protection grade IP20

Features:

All-round adaptation: integrated beam type, tower type, direct drive screw pump and other types of pumping unit special control functions.

Energy saving and efficiency increase: reduce reactive power according to load changes in real time, saving more than 20% of electric energy compared with the previous generation of products. The up/down speed can be set separately to make more strokes in the same time.

Mine monitoring: Added special functions for pumping units, such as pumping balance rate detection and dynamic fluid level detection, to monitor the status of the well and mine in real time and make automatic adjustments.

Automatic drainage: It can enter the sleep and wake-up state through external signals or time settings, and can perform low-power swing actions in the best balance position.

Strong expansion capability: support 3 expansion interfaces, support various types of expansion cards (IO expansion card, communication card, PG card, PLC card), support any card slot installation.

Standard braking unit: 380V voltage level products are equipped with built-in braking unit as standard, which reduces customer cost and installation volume.

Standard STO function: the application is more secure and reliable.

Built-in DC reactor: 380V 18.5-75kW is equipped with built-in DC reactor as standard, with high power factor and reduced interference to the grid environment.

Product parameters

Description of the function		Specifications
Power input	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V AC 3PH 520V(-15%)~690V(+10%) Rated voltage: 660V
	Input Current (A)	Please refer to "Product Ratings"
	Input Frequency (Hz)	50Hz or 60Hz, allowable range 47~63Hz
Power output	Output Voltage (V)	0~Input voltage
	Output Current(A)	Please refer to "Product Ratings"
	Output Power (kW)	Please refer to "Product Ratings"
	Output Frequency (Hz)	0~400Hz
Technical control performance	Control mode	Space Voltage Vector Control Mode, No PG Vector Control Mode (SVC), With PG Vector Control Mode (FVC)
	Motor type	Asynchronous motors, permanent magnet synchronous motors
	Speed ratio	Asynchronous machine 1:200 (SVC), synchronous machine 1:20 (SVC), 1:1000 (FVC)
	Speed control accuracy	±0.2%（SVC），±0.02%（FVC）
	Fluctuations in speed	± 0.3%（SVC）
	Torque response	<20ms（SVC），<10ms（FVC）
	Torque control accuracy	10%（SVC），5%（FVC）
	Starting torque	Asynchronous machine: 0.25Hz/150%(SVC) Synchronizer: 2.5 Hz/150% (SVC) 0Hz/200%（FVC）
	Overload capacity	150% rated current for 1 minute, 180% rated current for 10 seconds, 200% rated current for 1 second
Operational control performance	Frequency setting method	Digital setting, analog setting, pulse frequency setting, multi-speed operation setting, simple PLC setting, PID setting, Modbus communication setting, PROFIBUS communication setting, etc. It can realize the combination of settings and the switching of set channels
	Automatic voltage adjustment function	When the grid voltage changes, it can automatically keep the output voltage constant
	Fail-safe function	Provide more than 30 kinds of fault protection functions: over-current, over-voltage, under-voltage, over-temperature, phase loss, overload and other protection functions
	Speed tracking restart function	Shock-free smooth start of rotating motors Note: This function is available for 4kW or more
	Instantaneous stop function	When the power grid drops instantaneously, it operates without stopping by feeding back energy
	Switching function between two sets of motors	It supports two sets of motor parameters, which can realize motor switching control
Peripheral interfaces	Resolution of terminal analog input quantity	Not more than 20mV
	Resolution of terminal switching input quantity	Not more than 2ms
	Analog inputs	2 channels, AI1: 0~10V/0~20mA, AI2: -10~10V
	Analog output	1 channel, AO1: 0~10V/0~20mA
	Digital inputs	4 normal inputs, maximum frequency 1kHz, internal impedance: 3.3kΩ 2 high-speed inputs, maximum frequency 50kHz, support quadrature encoder input, with speed measurement function
	Digital output	1 high-speed pulse output, maximum frequency 50kHz 1 Y-terminal open collector output
	Relay output	Two programmable relay outputs RO1A is normally open, RO1B is normally closed, and RO1C is common RO2A is normally open, RO2B is normally closed, and RO2C is common Contact capacity: 3A/AC250V, 1A/DC30V
	Extended interfaces	Three expansion interfaces: SLOT1, SLOT2, SLOT3 (control board of 7.5KW and above) Expandable PG card, programmable expansion card, communication card, I/O card, etc
other	Installation:	It supports wall-mounted, floor-mounted, and flanged installation
	Operating ambient temperature	-10~50°C, derating above 40°C
	Ingress protection	IP20
	Pollution level	Level 2
	Cooling method	Forced air cooling
	Brake unit	380V 11kW~75kW (inclusive) built-in as standard 660V optional external
	EMC filters	The full range of 380V series of conducted emissions can meet the requirements of IEC/EN 61800-3 C3 level Optional external filter: Conducted emissions can meet the requirements of IEC/EN 61800-3 class C2 Note: In accordance with the EMC specifications required in the appendix of the manual, the motor and motor cables are selected in accordance with the technical requirements specified in the appendix of the manual.

Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.

This article introduces INVT/INVT inverter GD350-13-037G-6 products, if you are interested in INVT/INVT inverter, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience

INVT inverter GD350-13-037G-6 protection grade IP20

Sections viewed

Contact

working hours