INVT/INVT Induction Heater Driver MF10 AC 3PH 380V

Product introduction: MF10 series electromagnetic heater is a special product developed by INVT for electromagnetic heating applications, which realizes the conversion of three-phase power frequency mains into single-phase high-frequency power supply; The product adopts DSP digital control platform, develops new hardware and special software, and integrates resonant capacitors, with powerful functions and superior performance, and can be widely used in electromagnetic heating, metal processing, injection molding and other industries.

INVT/INVT MF10

Specifications:

Description of the function		Specifications
Power input	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) 380V by default
Power input	Input Frequency (Hz)	50Hz or 60Hz, allowable range 47~63Hz;
Power output	Output Voltage (V)	AC 1PH 0~540V
	Output power	20~100kW
	Output Frequency (Hz)	10k~20kHz； Rated up to 16kHz, more than to be used to derate
Dedicated features	Frequency adaptation function	The output frequency is automatically detected and adjusted according to the load situation, so that the intermediate frequency power supply works at the resonant frequency point, which improves the efficiency of the equipment and reduces the manual debugging time
	Thermostat and temperature control function	It can realize the temperature control function of low temperature operation and high temperature shutdown, and can also make the temperature constant at the set temperature to achieve constant temperature control
	Constant power control	The stability of the heating effect is ensured by constant power control, so that the output power will not change with the fluctuation of the input voltage
	Over-temperature automatic derating function	When the temperature of the load coil remains high, the operating power is automatically reduced to protect the load coil
	Temperature control function	Products with a power of 18.5kW and above can be controlled by PT100 to collect temperature signals to control the start and stop of the equipment
Peripheral interfaces	10V power supply	1 x 10V reference power supply with a maximum output current of 50mA
	24V power supply	3 x 24V power supply, providing 24V ± 10% power The maximum output current of the 24V terminal is 200mA; The maximum output current of the 24V_1 terminal is 500mA; The maximum output current of the 24V_2 terminal is 200mA;
	Analog inputs	1 channel (AI2) 0~10V/0~20mA
	Analog output	1CH (AO1) 0~10V /0~20mA
	Digital inputs	3 digital inputs (S1, S2, S3), the maximum frequency is 1kHz, and 12~30V voltage input can be accepted;
	Relay output	3 programmable relay outputs, contact capacity: 3A/AC250V, 1A/DC30V RO1A is normally open, RO1B is normally closed, and RO1C is common RO2A is normally open, RO2B is normally closed, and RO2C is common RO3A normally open, RO3B normally closed, RO3C common end
	Temperature detection terminals	3-channel temperature detection (TA_1/TB_1, TA_2/TB_2, TA_3/TB_3), support PT100 and NTC temperature sensors; PT100: Range: -20°C~350°C; -20°C~120°C accuracy±1°C,121°C~350°C accuracy±2°C; NTC: range -20°C~120°C, accuracy ±1°C;
	485 communication terminals	2 independent 485 communication terminals (485+, 485-), 485 differential signal port
other	Installation:	Wall-mounted
	Operating ambient temperature	-10~50°C, above 40°C needs to be derated, derated 4% for every 1° increase
	Storage temperature	-40°C~+70°C, the air temperature change is less than 1°C/min
	altitude	Below 1000m; When the altitude exceeds 1000m, the rate of 1% derating will be reduced according to the 100m derating
	Ingress protection	IP20
	Cooling method	Forced air cooling
	EMC	Standard C3 filter: meets the requirements of IEC61800-3 C3 class

The company has been with the concept of "customer first", quality and service to win the market, hoping to cooperate with all sectors of society, mutual benefit and win-win, create brilliance, and work together to create a better tomorrow! In line with the concept of honest service, the company welcomes new and old customers to inquire, on-site inspection, and negotiation business.

INVT/INVT Induction Heater Driver MF10 AC 3PH 380V

Sections viewed

Contact

working hours