Product introduction: The DENSO/DENSO horizontal articulated robot HSR048A1-N/S achieves the highest level of high-speed operation. By increasing the CPM (revolutions per minute), it is possible to operate at high speeds for a long time. New design, high rigidity, lightweight robotic arm. It combines high rigidity and light weight to achieve a high carrying weight (8 kg) and high-speed operation. It can be reversed by reversing the shaft and setting the direction. Ground installation and hoisting can be selected. +
specification
| | HSR048A1-N/S* | HSR055A1-N/S* | HSR065A1-N/S* | | The full length of the robotic arm | 205 (J1: 1st arm) + 275 (J2: 2nd arm) = 480mm | 275 (J1: 1st arm) + 275 (J2: 2nd arm) = 550mm | 375 (J1: 1st arm) + 275 (J2: 2nd arm) = 650mm | | Angle of action and stroke | J1 (1st axis) | ±130° | | J2 (2nd axis) | ±143.5° | ±150° | | Z (3rd axis) (*) | *＝10：100mm | *＝10：100mm | *＝10：100mm | | *＝20：200mm | *＝20：200mm | *＝20：200mm | | *＝32：320mm | *＝32：320mm | *＝32：320mm | | *＝51：510mm | *＝51：510mm | *＝51：510mm | | T (4th axis) | ±360° | | Axis combinations | J1 (1st axis) + J2 (2nd axis) + Z (3rd axis) + T (4th axis) | | Maximum loadable mass | 8kg | | Crafting maximum speed | The front end of the robotic arm | 7,540mm/s | 8,000mm/s | 8,850mm/s | | Z and T | Z (3rd axis): | Z (3rd axis): | Z (3rd axis): | | 100mm：1,700mm/s | 100mm：1,700mm/s | 100mm：1,700mm/s | | 200mm：2,300mm/s | 200mm：2,300mm/s | 200mm：2,300mm/s | | 320mm：2,475mm/s | 320mm：2,475mm/s | 320mm：2.475mm/s | | T (4th axis): 2,500°/s | T (4th axis): 2,500°/s | T (4th axis): 2,500°/s | | Repeatability (constant ambient temperature) | J1+J2 | ±0.01mm | ±0.012mm | | Z | ±0.01mm | | T | ±0.004° | | Maximum pressure input (down) | 98N (less than 1 second) | | Maximum allowable moment of inertia | 0.12kgm2 | | Location detection method | Absolute encoders | | Drive motors and brakes | With full-axis AC servo motor Z-axis, T-axis: with brake | | Brake release operation | Outside of UL standards | 1. Lift the brake by turning on the brake release switch only in direct mode | | 2. Remove the brake by TP or MP operation | | UL standard | 1. When the controller power supply is on, release the brake by turning on the brake release switch | | 2. The brake cannot be removed by TP or MP operation | | Pneumatic piping for users | 4 systems (φ4×2, φ6×2) | | Signal line for the user | ・19 cores (signal line for proximity sensors, etc.) | | · Ethernet | | Air source | Commonly used pressure | 0.05～0.35MPa | | Maximum allowable pressure | 0.59MPa | | Airborne Noise (A-weighted Equivalent Continuous Sound Pressure Level) | 80dB or less | | quality | approx. 31 kg (approx. 68.4 lb) | Approx. 31.5 kg (Approx. 69.5 lb) | Approx. 32 kg (approx. 70.6 lb.) |
The company respects the enterprise spirit of practicality, struggle and responsibility, creates a good corporate environment with integrity, win-win and creates business philosophy, and takes new management mode, perfect technology, thoughtful service and excellent quality as the basis for survival. We always adhere to the customer first, serve customers, and impress customers with their own services. Always adhering to the business philosophy of honesty and win-win, we have won the trust of many customers with preferential prices, strict quality, fast product deadlines and pre-sales consultation and after-sales service.
This article introduces the DENSO/DENSO horizontal articulated robot HSR048A1-N/S products, if you are interested in DENSO/DENSO horizontal articulated robot, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
DENSO/DENSO VS-6556 Vertical Articulated Robot with an arm span of 653mm
Introduction: The DENSO/DENSO VS-6556 is compact and compact, with high speed and high handling performance. The operating field is 653 mm, the carrying weight is 7 kg, and the standard cycle time is 0.49 seconds.
Give birth...
|
|
DENSO/DENSO VS-060 is high-speed, compact and easy to use
Product introduction:DENSO/DENSO VS-060 VS-060 has a significantly reduced arm size, which can work in tight spaces. In addition, although the size is reduced, the speed is increased and the cycle time is shortened. At the same time, the communication cable flange, harsh resistant ring ...
|
|
DENSO/DENSO Vertical Articulated Robot VM1800 1804mm
Introduction: The DENSO/DENSO Vertical Articulated Robot VM1800 is suitable for handling and palletizing large items, and can reduce the burden on workers handling heavy loads. The operating field is 1804mm, and the carrying weight is 25kg.
Products...
|
|
DENSO/DENSO Vertical Articulated Robot VM-60B1 130mm
Introduction: DENSO/DENSO The VM-60B1 vertical articulated robot has a long arm distance and a large handling mass in the vertical articulated manipulator. The operating field is 1298mm, the carrying mass is 13kg, and the standard cycle time is 0.95 seconds.
Give birth...
|
|
DENSO/DENSO horizontal articulated robot HSR065 Payload 8Kg
Product introduction: DENSO/DENSO horizontal articulated robot HSR065 achieves high-level high-speed operation. By increasing the CPM (revolutions per minute), it is possible to operate at high speeds for a long time. New design, high rigidity, lightweight robotic arm. High rigidity and light weight to achieve high transportable mass (8 ...
|
|
The DENSO/DENSO collaborative robot COBOTTA has an arm length of 342.5 mm
Product Introduction: DENSO/DENSO Collaborative Robot COBOTTA is a collaborative robot that does not require a safety barrier. Unique robotic arm structure to prevent pinching, design without sharp parts. It has a weight of about 4 kg and a weight of 500 g. Support direct ...
|
|
DENSO/DENSO horizontal articulated robot XR series 5kg
Introduction: The XR series direct-acting shaft and rotary shaft adopt a hoisting structure, and the manipulator runs directly below, which can be embedded in small equipment. Combined operation of direct axis and rotary axis improves productivity by 17% compared to Cartesian coordinate robot (P-P operation)
...
|
|
DENSO/DENSO 4-axis horizontal articulated robot HS series with a payload of 5Kg
Description: Models are divided into: HS-45352 (arm length 350mm, load 5Kg, Z-axis travel optional 200mm and 320mm) HS-45452 (arm length 450mm, load 5Kg, Z-axis travel optional 200mm and 320mm) HS-45552 (arm length 550mm, load 5Kg, Z-axis travel optional 200mm and 320 mm...
|
|
DENSO/DENSO Robot LSSN Load 3kg Arm span 12000mm
Introduction: DENSO/DENSO Robot LSSN Load 3 kg Working range of 12,000 mmThe compact design of the individual structure makes it possible to create equipment suitable for handling workpieces between various processes and install them on the floor.
Product parameters
...
|
|
DENSO/DENSO Robot XR-4373 Robotic arm 300mm weighs 47kg
Introduction: The DENSO/DENSO Robot XR-4373 has a lifting structure with a straight-acting axis and a rotary axis, which realizes the operation directly under the robot and can be combined with a compact device.
Features:
The slim structure allows the design to ...
|
|
DENSO/DENSO Robot LZSS Load 3kg Arm span 12000mm
Introduction: With a maximum load capacity of 3 kg and a maximum working area of 12,000 mm, the compact design of the DENSO robot LZSS makes it possible to create equipment suitable for handling workpieces between various processes.
Product parameters
...
|
|
DENSO/DENSO Robot LSNN 3-axis Body weight 9 kg
Introduction: With a maximum load capacity of up to 3 kg and a maximum working distance of 12,000 mm, the compact design of the DENSO LSNN robot makes it possible to create equipment suitable for handling workpieces between various processes.
Specifications ...
|
|
DENSO/DENSO Robot LYZZ Weight: 12g
Description: DENSO/DENSO Robot LYZZ With a compact design with a separate structure, it is possible to create equipment suitable for handling workpieces between various processes. It can be easily used anytime, anywhere. Robots that work with everyone. Human-friendly form, as well as easy ...
|
|
DENSO/DENSO Vertical Articulated Robot VLA-4025 Payload 40kg
Introduction: The VLA-4025 vertical articulated robot from DENSO can be used for handling large items and palletizing work, reducing the burden on workers handling heavy loads.
Product parameters
High grip and long reach
...
|
|
DENSO/DENSO VS-087 Vertical Articulated Robot with a permissible torque of 16.2 Nm
Introduction: The DENSO/DENSO VS-087 vertical articulated robot has a high level of high-speed performance in its class, which can achieve a significant increase in productivity. The operating field is 905 mm, the carrying weight is 7 kg, and the standard cycle time is 0.34 seconds.
...
|
|
DENSO/DENSO Built-in Robot XR-4341 4-axis Arm length 200mm Load 5Kg
Product introduction:The DENSO/DENSO built-in robot XR-4341 adopts a combination of a direct-acting axis and a rotary axis, which improves productivity by 17% (P-P operation) compared to our Cartesian axis robot, and adopts a hoist-mounted structure.
specification
Firm...
|
|
DENSO/DENSO Vertical Articulated Robot VMB-2518 IP40/IP67 protection
Introduction: The DENSO/DENSO vertical articulated robot VMB-2518 is suitable for handling large items and palletizing work, reducing the burden on workers handling heavy loads. Features:
Get rid of external wiring/piping
By improving user wiring, pipelines, and solenoid valves, we can increase the number of users.
|
|
DENSO/DENSO Robot HM-4A85 Load 20kg Reach 850mm
Introduction: The DENSO/DENSO robot uses a high-power AC servo motor to improve control performance, and the cycle time has reached the highest level in its class. At the same time, the repeatability of positioning is ±0.02mm——, which can quickly complete precise and meticulous operations. Outstanding high speed and precision of work, in ...
|
|
DENSO/DENSO Vertical PON VM Series 5-6 axes
Introduction: The slender body of the DENSO/DENSO VT VM series achieves high speed, high precision, and high efficiency, and is equipped with standard stops on each axis to ensure safety when the robot arm body is prevented from falling when the power is very stopped or when the power is off.
...
|
|
DENSO/DENSO Vertical Articulated Robot VS-6577 has an arm span of 854mm
Introduction: DENSO/DENSO VS-6577 is compact and compact, with high speed and high handling performance. The operating field is 854 mm, the carrying mass is 7 kg, and the standard cycle time is 0.59 seconds.
...
|
|
Contact
working hours
