Panasonic has a built-in amplifier for the ultra-compact photoelectric sensor EX-Z11FB-P

Panasonic built-in amplifier Ultra-compact photoelectric sensor EX-Z11FB-P, front detection, output operation, ON when shading, repeatability (perpendicular to the detection axis), 0.02 mm or less
Panasonic has a built-in amplifier for the ultra-compact photoelectric sensor EX-Z11FB-P

Panasonic has a built-in amplifier for the ultra-compact photoelectric sensor EX-Z11FB-P

project	content
Order product number	EX-Z11FB-P
Model	EX-Z11FB-P
CE marking indicates the applicable directives	EMC Directive, RoHS Directive
Output actions	ON when shading
Detection distance	50mm
Minimal detection of objects	ø0.3mm opaque (completely shading object) (50mm setting distance for projection and light receiver)
Repeatability (perpendicular to the detection axis)	0.02mm or less
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	Beamer: 10mA or less
Current consumption	Photoreceptor: 10mA or less
output	PNP open-collector transistors
	• Maximum outflow current: 20mA
	• Applied voltage: 30V DC or less (between output and +V)
	• Residual voltage: 1.5V or less (outflow current 20mA)
Output: Short-circuit protection	Equipped with
Reaction time	0.5ms or less
Working status indicator	Orange LED (lights up when ON is output)
Stability indicator	Green LED (lights up when light is stable and not in light)
Environmental resistance: Protective structure	IP67(IEC)
Environmental resistance: The ambient temperature at which it is used	-10~+55°C (note no condensation, freezing), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, storage: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 5,000lx or less on the receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute Between all charging parts and the case
Environmental resistance: insulation resistance	Between all charging parts and the housing, 20MΩ or more, based on a high impedance meter of 250V DC250V
Environmental resistance: Vibration resistance	Frequency: 10~500Hz, double amplitude: 3mm(MAX.20G), 2 hours each in X, Y and Z directions
Environmental resistance: impact resistance	Frequency: 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Red LED (Peak wavelength: 650nm, pitch shift)
Grounding method	float
Material	Body shell: PBT
	Lens: Polycarbonate
	Bracket: SUS304 (Front detection type, back SUS301)
cable	With 0.1mm 23 cores (2 cores of projector) rubber insulated cable 2m
Cable extension	For cables of 0.3 mm2 or more, the total length of each light projector and light receiver can be extended to up to 50 meters
weight	Body weight: Approximately 15 g each for light projection and light receiver
weight	Package weight: about 35g
annex	M2 Mounting Screws: 1 set (Front detection type: length 6 mm, Side inspection type: Length 10 mm)
remark	The unspecified measurement conditions are ambient temperature = +23°C.

Panasonic built-in amplifier Ultra-compact photoelectric sensor EX-Z11FB-P, front detection, output operation, ON when shading, repeatability (perpendicular to the detection axis), 0.02 mm or less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic has a built-in amplifier for the ultra-compact photoelectric sensor EX-Z11FB-P

Sections viewed

Contact

working hours