Panasonic Digital Fiber Optic Sensor FX-550 Cable Type Amplifier

Panasonic Digital Fiber Optic Sensor FX-550 Cable Type Amplifier, Cable Type Amplifier, typically consumes less than 960 mW (40 mA or less at 24 V supply voltage), made of polycarbonate, polyoxymethylene resin

Panasonic Digital Fiber Optic Sensor FX-550

project	content
Order product number	FX-551P-C2
Model	FX-551P-C2
Supply voltage	12V DC~24V DC+10-15% pulsation P-P10% or less
Power consumption	Typical : 960 mW or less (40 mA or less at 24 V supply voltage)
Power consumption	ECO mode: 680 mW or less (28 mA or less at 24 V supply voltage)
output	<PNP输出型>
	PNP open-collector transistors
	・Maximum outflow current : 100mA
	・Applied voltage : 30V DC or less (between output and +V)
	・Residual voltage : 2 V or less (maximum outflow current)
Output: Outputs the action	L/D mode can be used to switch between ON when light is in or ON when light is not in light
Output: Short-circuit protection	equip
Reaction time	FAST: 60 μs or less, STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less Switchable
How to set the sensitivity	2-point teaching/limited teaching/automatic teaching/manual adjustment
Light sensitivity setting	Equipped, 4 levels
The amount of light entering the display range	FAST/STD : 0～4,000、LONG : 0～8,000、U-LG/HYPR : 0～9,999
Timer function	OFF Delay Timer/ON Delay Timer/One-Touch Timer, Active/Invalid Switching, Timer Time Variable
Timer function: Timer time	Timer range "ms" : Approx. 1~9,999ms, approx. 1ms increments / Timer range "sec." : Approx. 1~32s, approx. 1s increments/
	Timer range "1/10ms": Approx. 0.1~999.9ms, approx. 0.1ms increments
	Note: When "LONG", "U-LG", "HYPR", "IP-F", and "IP-R" are set, the timer range cannot be set to "1/10ms".
Anti-jamming function	Equipped (up to 4 units). The response time varies depending on the setting.
	F-1: 0.8ms or less / F-2: 0.9ms or less / F-3: 1.0ms or less / F-4: 1.7ms or less
	Note: The strain becomes larger. Please confirm the test conditions before using the test.
Protective structures	IP40(IEC)
Use ambient temperature	-10~+55°C (-10~+50°C for 4~7 units, -10~+45°C for 8~16 units)
Use ambient temperature	(but no condensation and freezing), storage: -20~+70°C
Projection Element (Modulated)	Red LED (Peak wavelength: 660nm)
Material	Body shell, protective cover: Polycarbonate, button: Polyoxymethylene resin
cable	0.2mm2 3-core rubber cable, 2m long
Cable extension	The total length of the cable of 0.3mm2 or more can be extended to 100m
Cable extension	(The power supply voltage is 12V DC or more)
weight	Body weight: about 55g, package weight: about 90g
remark	When there is no specification, the measurement condition is the ambient temperature = +23°C.

Panasonic Digital Fiber Optic Sensor FX-550 Cable Type Amplifier, Cable Type Amplifier, typically consumes less than 960 mW (40 mA or less at 24 V supply voltage), made of polycarbonate, polyoxymethylene resin. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic Digital Fiber Optic Sensor FX-550 Cable Type Amplifier

Sections viewed

Contact

working hours