Panasonic transmissive type photoelectric sensor EX-33 with action transfer switch

Panasonic transmittive type photoelectric sensor EX-33 with action switch has a current consumption projector of 10 mA or less, a light receiver of 10 mA or less, and a repeatability of 0.05 mm or less
Panasonic transmissive type photoelectric sensor EX-33 with action transfer switch

Panasonic transmissive type photoelectric sensor EX-33 with action transfer switch

project	content
Order product number	EX-33
Model	EX-33
Detection distance	800mm
Detect objects	Opaque objects of 2 mm or more (completely shading objects)
Deviation ( Hysteresis )	-
Repeatability (perpendicular to the detection axis)	0.05mm or less
Supply voltage	12~24V DC±10% pulsating P-P 10% or less
Current consumption	Projector: 10mA or less
Current consumption	Light receiver: 10mA or less
output	NPN open-collector transistors
	・Maximum sink current: 50mA
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 2 V or less (at 50 mA inflow current), 1 V or less (at 16 mA inflow current)
Output: Outputs the action	ON when light is in/ON when shading
Output: Outputs the action	It can be selected with a toggle switch
Output: Short-circuit protection	Equipped with
Reaction time	0.5ms or less
Working status indicator	Orange LED (lights up when ON is output)
Working status indicator	(located on the light receiver)
Stability indicator	The green LED (lights up when light is stable and lights up when light is shading) is located on the light receiver
Sensitivity regulator	Equipped with a continuously variable regulator (located on the beam)
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type (JIS)
Environmental resistance: The ambient temperature at which it is used	-25~+55°C (note no condensation and freezing), -30~+70°C when storing
Environmental resistance: Ambient humidity is used	35~85RH, 35~85RH when stored
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 Lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more
Environmental resistance: Vibration resistance	Endurance 10~500Hz Double amplitude 3mm (MAX.20G) 2 hours each in X, Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Red LED (modulated)
Material	Housing: Zinc die-cast (nickel plated)
	Lens: Polycarbonate
	Cover: Polycarbonate
cable	0.1mm2 3-core (beamer: 2-core) rubber cable, 2m long
Cable extension	The total length of the cable of 0.3 mm2 or more can be extended to 50 m (1 emitter and 1 light receiver)
weight	Body weight: Approximately 20 g of light emitters and light receivers each
weight	Package weight: about 65g
annex	Nuts: 2 pcs
annex	Tooth lock washers: 2 pcs

Panasonic transmittive type photoelectric sensor EX-33 with action switch has a current consumption projector of 10 mA or less, a light receiver of 10 mA or less, and a repeatability of 0.05 mm or less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic transmissive type photoelectric sensor EX-33 with action transfer switch

Sections viewed

Contact

working hours