S188 Introduction: Traditional plate heat exchanger, with all connections at the top, you can inspect, clean or repair without disconnecting the heat exchanger from the pipes. SONDEX® heat exchangers for simple, fast and convenient installation and maintenance.
Danfoss/Danfoss_S188 conventional plate heat exchanger picture show:
Product Information:
Features and Benefits:
Experience the benefits of individually tailored solutions that perfectly meet your requirements and reduce energy consumption.
High performance with low pressure drop eliminates unnecessary burden on the system and optimizes the overall performance of the system.
The design enables a compact solution with a small footprint, simple installation, and easy maintenance.
apply
The HVAC industry – e.g., district cooling solutions that use seawater and groundwater as cooling sources – e.g., district heating solutions that use solar and geothermal energy as heat sources
Marine & Offshore – e.g. central cooling and lubricating oil cooling
Dairy/Food/Beverage Industry – e.g. pasteurization, heat recovery and applications requiring gentle handling
Sugar industry
Biogas industry
Pulp and paper industry
heavy industry
Mining industry
Petrochemical industry
Chemical industry – e.g. waste heat recovery from condensate
Technical Specifications:
Connection range from DN25 to DN600
(The frame design is performed in accordance with FEA and PED 2014/68/EU (EN13445) and ASME Chapter VIII Part 1 construction standards.) ）
Plates: AISI 304/316, titanium, SMO and Hastelloy. Other materials are available upon request
Gasket Material: EPDM-HT, NBR-HT, Viton. Other materials are available upon request
Plate height: up to 5.5 m (18 ft)
Flow rates up to 7,200 m3/h (31,700 gpm)
Operating pressure: up to 25 bar (363 psi)
The above is a product brief about Danfoss/Danfoss model S188, which reads: Conventional plate heat exchangers, with all the connections at the top, you can inspect, clean or repair the heat exchanger without disconnecting it from the pipes. SONDEX® heat exchangers for simple, fast and convenient installation and maintenance. If you still have questions, you can communicate with customer service at any time, 76 Technology guarantees that all finished products are genuine and honest transactions. You choose 76 Technology, 76 Technology reports on the purchase experience with high quality, excellent service and strict control.
|
More on that
|
Danfoss/Danfoss_BPHE brazed plate heat exchangers
About BPHE: Brazed plate heat exchangers, a modular design concept with fully customizable components, enable you to find the right solution for any air conditioning system. BPHE is a cost-effective solution that saves space, refrigerant, and energy.
...
|
|
Danfoss/Danfoss_1400 SONDEX® spiral heat exchangers
Introducing Danfoss/Danfoss_1400 SONDEX® spiral heat exchangers: Achieve ultra-high thermal performance without hindering the flow of media. Easy to maintain and clean, the revolving door that can be easily opened and closed without any special tools allows you to operate the entire plate and reel.
|
|
Danfoss/Danfoss_S37 sanitary plate heat exchangers
Danfoss/Danfoss_S37 Sanitary Plate Heat Exchangers Description: With extensive experience in designing hygienic, high-performance solutions, regenerative pasteurizers recover up to 95% of your energy consumption, resulting in significant energy savings.
Danfoss/Danfoss_S37 sanitary grade ...
|
|
Danfoss/Danfoss_SF160 free-flow plate heat exchangers
Introducing Danfoss/Danfoss_SF160 free-flow plate heat exchangers: Experience maximum equipment uptime. Contactless plate access reduces the risk of fouling and clogging, ensuring extended operating time. Sets a whole new standard for greater performance and reliability.
...
|
|
Danfoss/Danfoss_SPS1200 ® Plate & Shell heat exchangers
SPS1200 Introduction: Plate and shell heat exchanger, suitable for dealing with corrosive media and high pressure and high temperature conditions, the performance of compact heat exchanger far exceeds the performance of shell and tube heat exchanger, can achieve closer temperature close values, while its size is smaller, lighter weight.
Cinnabar...
|
|
Danfoss/Danfoss_SAW23 fully welded plate heat exchangers
Introducing the SAW23: Fully welded plate heat exchanger designed to handle corrosive, demanding media and achieve very close temperature proximity values with a true counterflow design. They are very small, compact and require all-welded products such as plate and shell or block heat exchangers.
|
|
Danfoss/Danfoss_MPHE miniature plate heat exchangers
Danfoss/Danfoss_MPHE miniature plate heat exchangers for heat pumps, chillers and closed circuit control systems provide cooling capacity of up to 400 kW/115 TR in single or double circuits. Its innovative plate design optimizes heat transfer with a high degree of reliability, so that no matter ...
|
|
Danfoss/Danfoss_SFD35 fresh water evaporators
About Danfoss/Danfoss_SFD35 freshwater evaporators: On ships, platforms and rigs, the need for production becomes apparent. The ability to produce fresh water on demand is critical in the marine and offshore industry. Freshwater evaporators are based on two or more evaporators that can be used as evaporators.
|
|
Danfoss/Danfoss_SBL5000 SondBlock heat exchangers
SBL5000 Introduction: Heat exchangers with better heat transfer performance and other obvious advantages. Through-block heat exchangers mark the beginning of a new era of efficient heat transfer, enabling efficient performance with a small surface area. The use of plates increases the heat transfer coefficient.
Danfoss/Danfoss_SBL ...
|
|
Danfoss/Danfoss_ MCHE microchannel heat exchangers
Introducing Danfoss/Danfoss_ MCHE Microchannel Heat Exchangers: Microchannel heat exchangers, clever and simple all-aluminum design, which are not only lightweight, but also unaffected by galvanic corrosion, high strength, hermetically sealed design and recyclable materials.
Danfoss/Danfoss_ MCHE microchannel ...
|
|
Danfoss/Danfoss_SW19-SW59 Semi-welded heat exchanger for industrial refrigeration ammonia applications
Introducing the Danfoss/Danfoss_SW19-SW59 semi-welded heat exchanger for industrial refrigeration ammonia applications: It can handle temperatures ranging from -40°C to 120°C (-40°F to 248°F) and pressures up to 25 bar (300 psi).
Danfoss/Danfoss_SW19 ...
|
|
Danfoss/Danfoss_SW59 semi-welded plate heat exchangers
Danfoss/Danfoss_SW59 Semi-Welded Plate Heat Exchangers Introduction: Semi-welded plate heat exchangers, the semi-welded product range use cassette technology instead of conventional plates to operate safely in hazardous media, high pressure levels or extreme temperatures not suitable for detachable heat exchangers.
Denver...
|
|
Danfoss/Danfoss_XB/SL brazed heat exchangers
INTRODUCTION TO XB / SL: DANFOSS AND SONDEX® BRAZING SOLUTIONS ARE COMBINED INTO A SINGLE PORTFOLIO OF COMBINED PLATE HEAT EXCHANGERS TO PROVIDE HIGH-QUALITY HEAT EXCHANGERS THAT ARE OPTIMIZED FOR EACH APPLICATION AND ARE AVAILABLE IN COPPER, COPPER ION OR STAINLESS STEEL BRAZING MATERIALS.
...
|
|
Contact
working hours
