|
EATON Contactors & Thermal Overload Relays ZB12-6 Contact Rated Current 6 A
Product brief for ZB12-6: Protects the motor from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple connectors are used...
|
|
EATON Thermal Overload Relay XTRE10B22T Control voltage 24 V
XTRE10B22T Product Description: Ideal for light loads such as lifting, encapsulation, heating, lighting, and automation systems. Economical and environmentally friendly Compact design Phase fault sensitivity Mounts directly to the XTMC Miniature Contactor Tripping Category 10.
Eaton Relays:
Technical Parameters ...
|
|
EATON Contactor & Thermal Overload Relay EMT6 relay w/auto reset, 230Vac
EMT6 Product Introduction: While the MT6 model is protected against overheating, there are several models in the family that provide the ultimate in control by preventing voltage loss, monitoring short circuits, and switching between Ability and Automatic off.
Eaton Relays:
...
|
|
Eaton Relay Control DILER-40 230V 4 NO
Product Brief for DILER-40: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W X D58 x 45 x 52 mm.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton Relay Control Type D ...
|
|
EATON Thermal Overload Relay 8TT93RS contacts are rated at 13 A
Product Brief for 8TT93RS: FLC Motor Rating 10 → 13 A Contact Rated Current 13 A Contact Rated Voltage 415 V ac Mounting Style Direct Contactor Series ADS8 Normal State Configuration Normally Open/Normally Closed Number of Auxiliary Contacts 1 Rated Power 5.5 kW Reset Square
|
|
EATON Contactor Miniature Relay DILER-40-G 4NO 24V DC Operation
Product Brief for DILER-40-G: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W x D58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above are EATON/Eaton Contactor Miniature Relays ...
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
Product Brief for 8TT91SDRS: Normal State Configuration Normally Open/Normally Closed Number of auxiliary contacts 1 Rated power 5.5 kW Reset method Automatic Maximum operating temperature +60°C Operating temperature range -40 → +60 °C Minimum operating temperature -40°C.
Eaton Relays:
...
|
|
EATON Relay Overload ZB65 6-10A Trip Rating 10A
ZB65 Product Introduction: These relays are suitable for use with DILM contactors DILM40 to DILM65 Installed under DILM 40 to DILM65 contactors Provide short circuit protection for electric motors When installing overload relays away from the contactor or when using multiple overload relays
|
|
EATON Relay Overload ZB32 16-24A Control Voltage 500 V AC
Product Brief for ZB32: Suitable for Protection of ATEX Motors Single-phase sensitivity according to IEC/EN 60947 Mounting brackets are required when the overload relay is not mounted directly on the contactor or when multiple contactors are used.
Eaton Relays:
Product technical parameters
The above is the EA...
|
|
EATON Thermal Overload Relay 8TT91RS Contact Current Rating 6 A,
Product Brief for the 8TT91RS: This series of overload relays is suitable for use with MEM Eaton package starters. Rated power 2.2 kW Reset method Automatic Width 105.8mm Depth 96.9mm Length 159.4mm Maximum operating temperature +60°C Operating temperature
|
|
EATON Contactor Relay DILA-31 24V DC 3 Closed with 1 Open Contact
Product brief introduction of DILA-31: Length 45mm, Depth 125.2mm, Width 68mm, Maximum Operating Temperature: +60°C, Minimum Operating Temperature: -25°C.
Eaton UPS:
Product technical parameters
The above is the product introduction of EATON Contactor Relay DILA-31 ...
|
|
EATON Overload Relay DILA-22 2 Closed & 2 Disconnect Contacts
Product Brief of DILA-22: Series DILA Normal State Configuration 2 NO / 2 NC Number of Auxiliary Contacts 0 End Type Screw Length 45mm Depth 125.2mm Width 68mm.
Eaton Relays:
Product technical parameters
Above...
|
|
EATON 7A AC Contactor Relay DILM7-10C(220-230V50HZ)
DILM7-10C Product Introduction: 32A and below specifications contactors can be directly controlled by PLC, thus reducing the number of intermediate relaysAll DC operated products and AC operated 115A, 150A, 170A products have built-in suppressors, simplifying engineering Eaton & Muller 7A AC Contactor Type ...
|
|
The ETR4-11-W relay is compact and saves volume in the control cabinet
Product introduction of ETR4-11-W: Fully functional, up to 9 functions and 10 time setting ranges Simple installation and set-up, accuracy up to one hundredth of a second Compact size saves volume in the control cabinet
EATON Relays:
Features & Functions:
...
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
Product Brief for the 8TT91SDRS: This series of overload relays is suitable for use with MEM Eaton package starters. FLC Motor Rating 6.9 → 10.4 A Contact Current Rating 10.4 A Mounting Style Direct Contactor Series ADS8 Normal ...
|
|
EATON Thermal Overload Relays XTOMP40AC1 Contacts rated at 10 A
XTOMP40AC1 Product Introduction: FLC Motor Rating 12 A Contact Current Rating 10 A Pole Configuration 3P Mounting Style Direct Mount Series XTOM Normal State Configuration Normally Open/Normally Closed Number of Auxiliary Contacts 2.
Eaton Relays:
Product technical parameters
Above...
|
|
EATON Contactor Relay DILA-40 24V DC 4 Closed Contacts
Product Brief of DILA-40: Contact Rated Current 4 A Range xStart Contact Rated Voltage 400 V ac Series DILA Normal State Configuration 4 NO Number of Auxiliary Contacts 0 Terminal Type Screw Length 68mm Depth 117mm Width 45mm.
Eaton Relays:
...
|
|
EATON Relay Overload ZB65 50-65A Trip Class 10A
Product Brief for ZB65: FLC Motor Rating 57 → 65 A Control Voltage 500 V ac Contact Current Rating 65 A Contact Voltage Rating 690 V AC Mounting Style Direct Contactor Series ZB65 Normal State Configuration NO/NC Number of Auxiliary Contacts 2 Rated ...
|
|
EATON relay, overload, ZB12, control voltage 500 V AC
Product Brief for ZB12: Suitable for Protection of Atex Motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple contactors are used, a mounting bracket is required (stock no. 493-0488- ZB32 only).
Eaton UPS:
...
|
|
EATON Contactors & Thermal Overload Relays DILA-40 4 Closed Contacts
Product Brief of DILA-40: Normal State Configuration 4 NO Number of Auxiliary Contacts 0 End Type Screw Length 45mm.
Eaton Relays:
Product technical parameters
The above products are EATON Contactors and Thermal Overload Relays DILA-40 ...
|
Contact
working hours
