|
EATON/伊顿 热过载继电器 XTRE10B22T 控制电压24 V
XTRE10B22T 的产品简介：合用于轻型负载，例如吊装、封装、加热、照明和自动化系统。经济且环保 紧凑设计 相位故障灵敏度 直接安装到 XTMC 微型接触器 跳闸 10 类。
伊顿继电器：
产品技术参数 ...
|
|
EATON/伊顿 7A 交流接触器式继电器DILM7-10C(220-230V50HZ)
DILM7-10C的产品简介：32A及以下规格的接触器可由PLC直接控制,从而减少了中间继电器的数量所有直流操作产品及交流操作115A、150A、170A产品内置抑制器,简化了工程设计伊顿穆勒 7A 交流接触器式 ...
|
|
EATON Thermal Overload Relay 8TT93RS contacts are rated at 13 A
Product Brief for 8TT93RS: FLC Motor Rating 10 → 13 A Contact Rated Current 13 A Contact Rated Voltage 415 V ac Mounting Style Direct Contactor Series ADS8 Normal State Configuration Normally Open/Normally Closed Number of Auxiliary Contacts 1 Rated Power 5.5 kW Reset Square
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
8TT91SDRS的产品简介：正常状态配置 常开/常闭 辅助触点数目 1 额定功率 5.5 kW 复位方法 自动 **高工作温度 +60°C 工作温度范围 -40 → +60 °C **低工作温度 -40°C。
伊顿继电器：
...
|
|
EATON Contactor Miniature Relay DILER-31-G 3**NC, 24V
Product Brief for DILER-31-G: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W X D 58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above is EATON/Eaton contact ...
|
|
EATON/伊顿 德国穆勒MOELLER 继电器 ZB12-4
ZB12-4的产品简介：具有缺相敏感和温度补偿功能*可以手动或自动复位*具有测试按钮 热过载继电器ZB还可用来保护增安型电机。
EATON/伊顿 继电器 ：
详细
Start系列热过载继电器ZB可 ...
|
|
EATON/伊顿 继电器 过载 热敏电阻 EMT6 24- 240V交流,故障LED
EMT6的产品简介：无论这些继电器在机器本身、轴承、齿轮和冷却液上是否接收相应的信号和跳闸。尽管 MT6 型号可防止过热、但该系列中有多种型号能够防止电压损失、监控短路、 Ability （手动）和 ...
|
|
EATON/伊顿 接触器及热过载继电器 XTOMP40AC1 触点额定电流10 A
XTOMP40AC1的产品简介：Eaton 的 Cutler-Hammer XT 微型过载继电器具有非反向和反向微型接触器、微型过载继电器和扣入式附件。 XT 系列微型过载继电器具有紧凑型设计，经济且环保 紧凑设计 相位 ...
|
|
EATON/伊顿 接触器及热过载继电器 DILA-40 4闭合触点
DILA-40的产品简介：正常状态配置 4 常开 辅助触点数目 0 接端类型 螺钉 长度 45mm。
伊顿继电器：
产品技术参数
以上是产品EATON/伊顿 接触器及热过载继电器 DILA-40 ...
|
|
Eaton Relay Control DILER-40 230V 4 NO
Product Brief for DILER-40: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W X D58 x 45 x 52 mm.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton Relay Control Type D ...
|
|
EATON/伊顿 继电器 ETR4-11-W 尺寸小巧，可**节约控制柜内的体积
ETR4-11-W的产品简介：功能齐全，**多可提供9种功能和10种时间设定范围 安装和设定简单，精度**高可达百分之一秒 尺寸小巧，可**节约控制柜内的体积
EATON/伊顿 继电器：
特点与功能：
...
|
|
EATON Contactor Miniature Relay DILER-40-G 4NO 24V DC Operation
Product Brief for DILER-40-G: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W x D58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above are EATON/Eaton Contactor Miniature Relays ...
|
|
EATON/伊顿 接触器及热过载继电器 8TT94SD 触点额定电流 31 A
8TT94SD的产品简介：FLC 电动机额定值 22.5 → 31 A 触点额定电流 31 A 安装样式 直接接触器 系列 ADS8 正常状态配置 常开/常闭 辅助触点数目 1 额定功率 15 kW。
伊顿继电器：
产品技术参数 ...
|
|
Eaton relay overload ZB32 control voltage 500 V AC
Product Brief for ZB32: Protects the motor from phase errors or overloads Short-circuit protection when connected directly to contacts Suitable for protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple connectors are used...
|
|
EATON/伊顿 热过载继电器 XTRG10B30DT 额定值95A
XTRG10B30DT的产品简介：体积小巧，**利用空间技术**的触点设计**多可加装6个辅助触点模块DIN导轨或面板安装选项 400V工作电压可达660VAC690V绝缘额定值
EATON/伊顿 热过载继电器： ...
|
|
Eaton Contactor Relay DILA-31 110V AC 3 Closed with 1 Open Contact
Product Brief of DILA-31: Contact Rated Current 4 A Range xStart Contact Rated Voltage 415 V ac Series DILA Normal State Configuration 3 NO / 1 NC Number of Auxiliary Contacts 0 Terminal Type Screw Length 45mm Depth 125.2mm Width 68mm.
...
|
|
Eaton relay overload, ZB65 16-24A, trip class 10A
Product Brief for ZB65: These relays are suitable for use with DILM contactors DILM40 to DILM65 Installed under DILM 40 to DILM65 contactors to provide short circuit protection for the motor When installing an overload relay away from the contactor or when using multiple overload relays ...
|
|
EATON relay overload ZB12 control voltage 500 V AC
Product brief for ZB12: Protects motors from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not directly mounted on the contactor or when multiple connectors are used...
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
Product Brief for the 8TT91SDRS: This series of overload relays is suitable for use with MEM Eaton package starters. FLC Motor Rating 6.9 → 10.4 A Contact Current Rating 10.4 A Mounting Style Direct Contactor Series ADS8 Normal ...
|
|
EATON Contactor & Thermal Overload Relay EMT6 relay w/auto reset, 230Vac
EMT6 Product Introduction: While the MT6 model is protected against overheating, there are several models in the family that provide the ultimate in control by preventing voltage loss, monitoring short circuits, and switching between Ability and Automatic off.
Eaton Relays:
...
|
Contact
working hours
