FX3U-232ADP-MB Introduction: Mitsubishi Mitsubishi PLC RS232C Interface Adapter Module Six communication modules for FX3U PLC. The ADP module is mounted on the left side of the base unit, while the BD module snaps into the left front corner of the base unit. The RS232 interface can be used for a variety of applications, such as communicating with a PC, printer, or barcode reader, while the RS422 interface provides another programming port that allows simultaneous connection of the operator panel (HMI) and programming PC. The RS 485 interface allows for the formation of FX PLC networks and provides a simple connection to a Mitsubishi inverter drive using built-in protocol commands. The USB BD module can be connected to a PC via USB for programming.
Mitsubishi/Mitsubishi Electric _FX3U-232ADP-MB
Model features introduced
Communication Modules Six communication modules for FX3UPLC. The ADP module is mounted on the left side of the base unit, while the BD module snaps into the left front corner of the base unit. The RS232 interface can be used for a variety of applications, such as communicating with a PC, printer, or barcode reader, while the RS422 interface provides another programming port that allows simultaneous connection of the operator panel (HMI) and programming PC. The RS485 interface allows for the formation of FXPLC networks and provides a simple connection to a Mitsubishi inverter driver using built-in protocol commands. The USBBD module can be connected to a PC via USB for programming. concentrate
The ADP module is mounted on the left side of the FX3U base unit and requires one of the following modules to connect to the PLC: FX3U-232-BD (539-0869), FX3U-422-BD (539-0875), FX3U-485-BD (539-0881), FX3U-USB-BD (539-0897), FX3U-CNV-BD (539-0904) Up to two ADP communication modules or one ADP and one BD communication module can be installed to the base unit at the same time. The PLC base unit provides the supply voltage. The Mitsubishi FX3UFX3UCPU is compatible with existing FX2N expansion modules and new FX3UADP expansion modules, and can be used as a replacement for FX2NPLC.
Model parameters are introduced| attribute | numeric value | | Used in: | FX3U series | | Module type | RS232C interface adapter | | Voltage category | 5V DC | | length | 106mm | | width | 17.6mm | | depth | 81.5mm | | size | 106x17.6x81.5mm |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
The above is the Japan brand Mitsubishi / Mitsubishi Electric model FX3U-232ADP-MB products, the introduction of this product is: Mitsubishi Mitsubishi PLC RS232C interface adapter module, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
FX5-C32ET/DSS Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-C32ET/DSS Introduction: Mitsubishi FX5 Series Digital I/O Module, 32 x I/O, 800mA, 24 V DC, 20.1 x 90 x 87 mmMitsubishi's iQ-F Series FX5UC expansion modules offer high performance in a compact, cost-effective package. These...
|
|
FX5-4AD-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-4AD-ADP Introduction: Mitsubishi Mitsubishi PLC Analog Input Modules FX5 Series, the first model of the 4-input iQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues FX's tradition of total flexibility, offering a wide range of new and ...
|
|
FX3U-64DP-M Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-64DP-M Introduction: Mitsubishi PLC input/output module, 8 x I/O, 24 V DC, 90 x 43 x 87 mm two network communication modules for FX3U PLC. These special function modules are mounted on the right side of the basic unit and occupy 8 input/output points FX3U- ...
|
|
Q63P Japan Mitsubishi/Mitsubishi Electric PLC power supply
Q63P Introduction: Mitsubishi Q63 Series PLC Power Supply, For Use With MELSEC Q Series, 24 V DC Line Voltage, 5V DC Output Power Supply, 6 A Output, 55.2 x 98 x 90 mm This DC input power supply unit is designed to provide the 5V DC required by Q Series modules. ...
|
|
QJ71C24N-R2 Japan Mitsubishi/Mitsubishi Electric PLC Expansion Module
Introducing the QJ71C24N-R2: Mitsubishi PLC Interface Module This module provides fast communication (up to 115kbaud) between Q Series PLC systems and personal computers. This module is ideal for applications that require integration with a PC as well as other devices such as barcode readers, weighing systems, and boots.
|
|
FX3U-4AD-ADP Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-4AD-ADP Introduction: Mitsubishi PLC I/O Module, 5 V DC, 24 V DC, 106 x 17.6 x 89.5 mm Analog I/O Module with 4 Channels, 12-Bit Resolution, and Direct Addressing. Applies only to connecting to an FX3U PLC. 4 ...
|
|
FX3G-2AD-BD Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3G-2AD-BD Introduction: Mitsubishi MELSEC Series FX1, FX2, FX3 Series PLC I/O Modules, 2 x I/O, 4 → 20 mA, 0 → 10 V DC
Mitsubishi/Mitsubishi Electric _FX3G-2AD-BD
Model features introduced
Analog inputs/outputs are suitable for ...
|
|
FX5-CNV-IF Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-CNV-IF Introduction: Mitsubishi FX5 Series PLC Expansion Module, 14.6 x 90 x 74 mm Mitsubishi FX5 Series Expansion Connector Conversion Module. These connector conversion modules are the communication between the FX5U expansion module and the expansion connector, so connecting the FX5U ...
|
|
FX58AD Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX58AD Introduction: Mitsubishi FX5 Series Analog Input Module, 8 x I/O, 100 mA, 24 V DC, 50 x 102.2 x 90 mm
Mitsubishi/Mitsubishi Electric _FX58AD
Model features introduced
Model parameters are introduced
All suppliers of 76 Technology have gone through ...
|
|
FX5-CNV-BUS Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-CNV-BUS Introduction: Mitsubishi Mitsubishi PLC Bus Conversion Module FX5 Series, 1 Input The first model in the iQ-F series is the FX5U, which offers high performance in a compact and economical package. The FX5U carries on the full range of FX products by offering a wide range of new and existing add-on options.
|
|
FX5-8EX/ES Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-8EX/ES Introduction: Mitsubishi FX5 Series PLC I/O Module, 40 x 90 x 83 The first model in the mmiQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues FX's tradition of total flexibility, offering a wide range of ...
|
|
QY81P Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QY81P Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 32 x I/O, 12 → 24 V DC, 98 x 27.4 x 90 mm32 bit transistor output channel, rated at 24V DC, located in a single Q series slot QY81P uses connectors and plug-in ...
|
|
FX5-16EYR/ES Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-16EYR/ES Introduction: Mitsubishi FX5 Series PLC I/O Module, 40 x 90 x 83 The first model in the mmiQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. Continuing the FX tradition of total flexibility, the FX5U offers a wide range of ...
|
|
Mitsubishi Q173HCPU(N)/Q172HCPU(N) series motion controllers
Introduction: Mitsubishi Q173HCPU/Q172HCPU series motion controller is a high-performance motion controller launched on the basis of the Q173CPU/Q172CPU series motion controller. Like the Q173CPU/Q172CPU series motion controllers, the Q173HCPU/Q172HCPU series motion controllers can...
|
|
Mitsubishi module QJ72LP25GE AC220V 50/60Hz
Introduction: The maximum number of links per station QJ72LP25GE Mitsubishi module is remote I/O station-> remote master (LY+LB)/8+ (2*LW)
|
|
Mitsubishi/Mitsubishi Electric Module FX5-80SSC-S 4 output/input
FX5-80SSC-S Introduction: Mitsubishi PLC Simple Motion Module FX5 Series, 4 Inputs, 4 Outputs The first model in the iQ-F series is the FX5U, which offers high performance in a compact and economical package. The FX5U carries on the F...
|
|
FX2N-16EX-ES/UL Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX2N-16EX-ES/UL Introduction: Mitsubishi PLC input/output module, 24 V DC, 90 x 40 x 87 mm, available in 8 or 16 input or output point sizes. They are connected directly to the right front end of the base unit or extension unit (see digital extension unit below), ...
|
|
FX5-4AD-PT-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-4AD-PT-ADP Introduction: Mitsubishi PLC Analog I/O Modules The first model in the FX5 Series, 4-Input, 4-Output iQ-F Series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues FX's tradition of total flexibility, ...
|
|
Mitsubishi Module FX5-C16EX/D 65mA(DC24V)
Introduction: Mitsubishi module FX5-C16EX/D rated voltage DC24V (external power supply), DC5V (internal unit power supply), current consumption 65mA (DC24V), 100mA (DC5V), input sensitive current of 3.0mA or more at ON, 1.5mA or less at OFF.
...
|
|
QX10 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QX10 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 16 x I/O, 100 → 120 V AC, 98 x 27.4 x 90 mm 16-bit digital input channel, rated at 110V AC, located in a single Q Series slot with screw ends for direct ...
|
|
Contact
working hours
