FX2N-16EX-ES/UL Japan Mitsubishi/Mitsubishi Electric PLC I/O module

FX2N-16EX-ES/UL Introduction: Mitsubishi PLC input/output module, 24 V DC, 90 x 40 x 87 mm, available in 8 or 16 input or output point sizes. They are connected directly to and powered by the right front end of the base unit or extension unit (see digital extension unit below). The input block is opto-isolated, with an optional 24V DC sink or source current for NPN or PNP sensors, and an output block with relay or transistor output. The number of blocks can be increased depending on several factors. But as a wizard, you can add blocks with up to 32 inputs/outputs via the FX1N. Further expansion (for FX1N and FX2N) is achieved by adding an expansion (see 2 below), which in turn can be further expanded by adding more expansion blocks. The number of inputs/outputs can be added via the FX2N, depending on the size of the base unit. For FX2N base units with 16 and 32 inputs/outputs and expansion units with 32 inputs/outputs, you can add up to 32 inputs or 24 outputs, or (for example) 24 inputs and 8 outputs. For larger basic and expansion units, you can add up to 64 inputs or 48 outputs, or, for example, 32 inputs and 24 outputs. For details and limitations on the full configuration, see the FX1N and FX2N hardware manuals.

Mitsubishi/Mitsubishi Electric _FX2N-16EX-ES/UL

Mitsubishi/Mitsubishi Electric FX2N-16EX-ES/UL

Model features introduced

The digital expansion block is available in 8 or 16 input or output point sizes. They are connected directly to and powered by the right front end of the base unit or extension unit (see digital extension unit below). The input block is opto-isolated, the optional 24V DC sink current or source current is suitable for NPN or PNP sensors, and the output block has a relay or transistor output. The number of blocks can be increased depending on several factors. But as a wizard, the FX1N allows you to add blocks with up to 32 inputs/outputs. Further expansion (for FX1N and FX2N) is achieved by adding an expansion (see 2 below), which in turn can be further expanded by adding more expansion blocks. The number of inputs/outputs can be added via the FX2N, depending on the size of the base unit. For FX2N base units with 16 and 32 inputs/outputs and expansion units with 32 inputs/outputs, it is possible to add up to 32 inputs or 24 outputs, or (for example) 24 inputs and 8 outputs. For larger basic and expansion units, up to 64 inputs or 48 outputs can be added, or, for example, 32 inputs and 24 outputs. For details and limitations on the full configuration, see the FX1N and FX2N hardware manuals. Mitsubishi Digital Expansion ModuleThe Mitsubishi FX2N series of digital expansion modules has 16 digital inputs (24VDC sink/source current optional). They can be connected directly to the right end of the pedestal unit or expansion unit and can also provide power. The input points are configurable in sink and source currents and are selectable to fit PNP or PNP devices. When using the FX2N, the number of inputs/outputs is added according to the size of the base device. apply
Industrial automation, robotics, automotive industry
authentication
UL/cul certification, CE certification
Additional modules for the Mitsubishi FX1S, FX1N, and FX2NPLC All products in this series can be used with the FX1S, FX1N, and FX2NPLC, unless otherwise specified. All products are DIN rail mounted, 90mm high and 87mm deep. The width can be adjusted, as shown in the table below. All of the following products (except extension cables) can be connected directly to the right side of the previous unit, block or module using a short one-piece wire.

Model parameters are introduced

attribute	numeric value
Manufacturer series	FX2N series
Enter the number	16
Enter the type	digit
Used in:	FX2N series
Voltage category	24V DC
Module type	Input module
length	90mm
width	40mm
depth	87mm
size	90x40x87mm

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

The above is the Japan brand Mitsubishi / Mitsubishi Electric model FX2N-16EX-ES / UL products, the introduction of this product is: Mitsubishi PLC input/output module, 24 V DC, 90 x 40 x 87 mm, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.

FX2N-16EX-ES/UL Japan Mitsubishi/Mitsubishi Electric PLC I/O module

Sections viewed

Contact

working hours