FX2N-2DA Introduction: Mitsubishi PLC I/O Module, 2 x I/O, 4 → 20 mA, 5 V DC, 24 V DC, 90 x 55 x 87 mm with 4 analog output channels. A separate 24V DC power supply is required.
Mitsubishi/Mitsubishi Electric _FX2N-2DA
Model features introduced
The analog output module has 4 analog output channels. A separate 24V DC power supply is required. Mitsubishi Analog Output ModuleThe Mitsubishi Analog Output Module is designed for use with the FX2N, FX1N, and FX1Splcs. The module is equipped with 2 output channels for 0VC to 5VDC, 0VDC to 10VDC, and 4mA to 20mA analog outputs. The modules are mounted on the left side of the PLC base unit. Add an output module according to the size of the base device. Features and Benefits:
12-bit resolution, 8 input/output points, analog, relay, transistor type, output ambient operating temperature range from 0°C to 55°C
apply
Industrial automation, robotics, automotive industry
authentication
CEul/cul certification
Additional modules for the Mitsubishi FX1S, FX1N, and FX2NPLC All products in this series can be used with the FX1S, FX1N, and FX2NPLC, unless otherwise specified. All products are DIN rail mounted, 90mm high and 87mm deep. The width can be adjusted, as shown in the table below. All of the following products (except extension cables) can be connected directly to the right side of the previous unit, block or module using a short one-piece wire.
Model parameters are introduced| attribute | numeric value | | Manufacturer series | FX1N series, FX3G series, FX3U series | | Number of outputs | 2 | | Output type | mock | | Used in: | FX1N series, FX3G series, FX3U series | | Number of inputs/outputs | 2 | | Voltage category | 5V DC, 24V DC | | Output current | 4→20mA | | length | 90mm | | width | 55mm | | depth | 87mm | | size | 90x55x87mm | | Maximum operating temperature | 55°C | | Minimum operating temperature | 0°C |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
The above is the Japan brand Mitsubishi/Mitsubishi Electric model FX2N-2DA products, the introduction of this product is: Mitsubishi PLC input/output module, 2 x I/O, 4 → 20 mA, 5 V DC, 24 V DC, 90 x 55 x 87 mm, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
FX5-C16EX/DS Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-C16EX/DS Introduction: Mitsubishi FX5 Series Digital I/O Module, 16 x I/O, 24 V DC, 20.1 x 90 x 87 mmMitsubishi's iQ-F Series FX5UC expansion modules offer high performance in a compact, cost-effective package. These digital inputs/...
|
|
FX5-4DA-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-4DA-ADP Introduction: Mitsubishi PLC Analog Output Modules FX5 Series, The first model in the 4-output iQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues FX's tradition of total flexibility, offering a wide range of new and ...
|
|
Mitsubishi Electric power module R63P voltage DC24V weighs 0.41kg
Introduction: Mitsubishi PLC MELSEC iQ-R series (Mitsubishi iQ-R) is a revolutionary new generation of programmable controllers that open up a new era of automation. This series is another flagship PLC product after the MELSEC Q series.
...
|
|
FX5-16EYR/ES Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-16EYR/ES Introduction: Mitsubishi FX5 Series PLC I/O Module, 40 x 90 x 83 The first model in the mmiQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. Continuing the FX tradition of total flexibility, the FX5U offers a wide range of ...
|
|
FX2N-2AD Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX2N-2AD Introduction: Mitsubishi PLC Input and Output Module, 2 Inputs, 2 OutputFX2N-2xD Modules with Analog Inputs, which can be used to convert analog inputs into 12-bit digital values and forward this value to a PLC controller. The FX2N-xAD is compatible with the FX0N, FX2N, and F...
|
|
FX3G-2AD-BD Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3G-2AD-BD Introduction: Mitsubishi MELSEC Series FX1, FX2, FX3 Series PLC I/O Modules, 2 x I/O, 4 → 20 mA, 0 → 10 V DC
Mitsubishi/Mitsubishi Electric _FX3G-2AD-BD
Model features introduced
Analog inputs/outputs are suitable for ...
|
|
FX58AD Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX58AD Introduction: Mitsubishi FX5 Series Analog Input Module, 8 x I/O, 100 mA, 24 V DC, 50 x 102.2 x 90 mm
Mitsubishi/Mitsubishi Electric _FX58AD
Model features introduced
Model parameters are introduced
All suppliers of 76 Technology have gone through ...
|
|
FX5-232-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-232-ADP Introduction: Mitsubishi PLC Expansion Adapter Module FX5 Series, 1 Input The first model in the iQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues the full flexibility of FX's tradition with a wide range of new ...
|
|
FX3G-422-BD Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3G-422-BD Introduction: Mitsubishi PLC RS422 Interface Adapter Module, 1 input Mitsubishi Electric Professional Series FX3G Series Interface Adapter. These interface adapters provide an RS422 interface for connecting additional devices to the controller. Place...
|
|
QX80 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QX80 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 16 x I/O, 24 V DC, 98 x 27.4 x 90 mm, 16-bit input channel, rated at 24 V DC, in a single Q Series slot Equipped with screw terminal blocks for direct connection to input ...
|
|
FX5-485-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX5-485-ADP Introduction: Mitsubishi Mitsubishi PLC Expansion Adapter Module FX5 Series, 1 The first model in the iQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues the full flexibility of FX's tradition with a wide range of new ...
|
|
FX3U-USB-BD Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3U-USB-BD Introduction: Mitsubishi Mitsubishi six communication modules for FX3U PLC. The ADP module is mounted on the left side of the base unit, while the BD module snaps into the left front corner of the base unit. The RS232 interface can be used in a variety of applications, e.g. with PCs, printers or barcode reading ...
|
|
Mitsubishi/Mitsubishi Electric Module FX5-80SSC-S 4 output/input
FX5-80SSC-S Introduction: Mitsubishi PLC Simple Motion Module FX5 Series, 4 Inputs, 4 Outputs The first model in the iQ-F series is the FX5U, which offers high performance in a compact and economical package. The FX5U carries on the F...
|
|
QY80 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QY80 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 12 → 24 V DC, 98 x 27.4 x 90 mm16 bit transistor output channel, rated at 24V DC, located in a single Q series slot Equipped with screw terminal blocks for direct connection to the transmission ...
|
|
Mitsubishi Q173HCPU(N)/Q172HCPU(N) series motion controllers
Introduction: Mitsubishi Q173HCPU/Q172HCPU series motion controller is a high-performance motion controller launched on the basis of the Q173CPU/Q172CPU series motion controller. Like the Q173CPU/Q172CPU series motion controllers, the Q173HCPU/Q172HCPU series motion controllers can...
|
|
FX3U-4DA-ADP Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-4DA-ADP Introduction: Mitsubishi MELSEC FX Series PLC I/O Module, 4 x I/O, 5 → 24 V DC, 90 x 17.6 x 89.5 mm Analog I/O Module with 4 channels, 12-bit resolution, and direct addressing. Only suitable for ...
|
|
FX3U-485ADP-MB Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3U-485ADP-MB Introduction: Mitsubishi Mitsubishi PLC RS485 Interface Module Six communication modules for FX3U PLC. The ADP module is mounted on the left side of the base unit, while the BD module snaps into the left front corner of the base unit. The RS232 interface can be used in a variety of applications such as ...
|
|
QJ71C24N-R2 Japan Mitsubishi/Mitsubishi Electric PLC Expansion Module
Introducing the QJ71C24N-R2: Mitsubishi PLC Interface Module This module provides fast communication (up to 115kbaud) between Q Series PLC systems and personal computers. This module is ideal for applications that require integration with a PC as well as other devices such as barcode readers, weighing systems, and boots.
|
|
Mitsubishi Electric Power Module R61P Weight: 0.41kg
Introduction: The MELSEC iQ-R series features a wide range of programmable automatic controllers to meet all aspects of automatic control. The multi-CPU architecture further accelerates data exchange on the backplane (main baseboard). The CPU includes a variety of embedded functions to perform various control tasks, as well as a built-in USB port and ...
|
|
FX2N-8EX-ES/UL Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX2N-8EX-ES/UL Introduction: Mitsubishi PLC Power Module, 8 Inputs, 8 → 64 outputs are available in 8 or 16 input or output point sizes. They are connected directly to the front right of the base unit or extension unit (see digital extension unit below) and are connected by these installations.
|
|
Contact
working hours
