Introduction: The MELSEC iQ-R series features a wide range of programmable automatic controllers to meet all aspects of automatic control. The multi-CPU architecture further accelerates data exchange on the backplane (main baseboard). The CPU includes a variety of embedded functions to perform a variety of control tasks, as well as built-in USB and Ethernet ports.
Product Details
【Input power supply voltage】AC100——240V(AC85——264V)
【Input Frequency】50/60Hz ±5%
[Input voltage error rate] within 5%.
[Maximum input skin phase power] 130VA
【Inrush current】20A within 8ms
[DC5V rated output current] 6.5A
[DC5V overcurrent protection] 7.1A or more
[DC5V overvoltage protection] 5.5-6.5V
[Efficiency] 76% or more
[Allowable instantaneous power failure time] within 20ms
【Withstand voltage】AC2300Vrms/1min (altitude 0-2000m)
【Fuse】Built-in (cannot be changed)
【Contact Output】
Usage: ERR contact
Rated opening and closing voltage/current: DC24V 0.5A
Minimum opening and closing load: DC5V 1mA
Response time: OFF->ON 10ms or less, ON->OFF 12ms or less
Surge Suppressor: None
Fuse: None
[Dimensions: H*W*D[mm]] 106*54.6*110
[Weight] 0.41kg
This article introduces Mitsubishi Electric Power Module R61P Weight 0.41kg product, if you are interested in Mitsubishi Electric Power Module, please also contact our module, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
FX3U-64DP-M Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-64DP-M Introduction: Mitsubishi PLC input/output module, 8 x I/O, 24 V DC, 90 x 43 x 87 mm two network communication modules for FX3U PLC. These special function modules are mounted on the right side of the basic unit and occupy 8 input/output points FX3U- ...
|
|
FX2N-1HC Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX2N-1HC Introduction: Mitsubishi FX2N Series Counting Module, 8/2 x I/O, 500 mA, 5 → 24 V DC, 90 x 55 x 87 mmThis provides an ideal method for establishing a connection between the shaft encoder and the FX2N PLC. It counts up to 50kHz 1 or 2 phases ( ...
|
|
Mitsubishi Module FX5-C16EX/D 65mA(DC24V)
Introduction: Mitsubishi module FX5-C16EX/D rated voltage DC24V (external power supply), DC5V (internal unit power supply), current consumption 65mA (DC24V), 100mA (DC5V), input sensitive current of 3.0mA or more at ON, 1.5mA or less at OFF.
...
|
|
QY10 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QY10 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 16 x I/O, 24 V DC, 250 V AC, 98 x 27.4 x 90 mm pocket-sized, allows 8 (QY18A) or 16 (QY10) outputs in a single Q Series slot AC or DC ...
|
|
FX3U-4AD Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-4AD Introduction: Mitsubishi MELSEC FX Series PLC I/O Module, 4 x I/O, 5 V DC, 24 V DC, 90 x 55 x 87 mm analog I/O module with 4 channels, 12-bit resolution and direct addressing. Only available if connected to ...
|
|
QJ71C24N-R2 Japan Mitsubishi/Mitsubishi Electric PLC Expansion Module
Introducing the QJ71C24N-R2: Mitsubishi PLC Interface Module This module provides fast communication (up to 115kbaud) between Q Series PLC systems and personal computers. This module is ideal for applications that require integration with a PC as well as other devices such as barcode readers, weighing systems, and boots.
|
|
FX3U-ENET Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX3U-ENET Introduction: Mitsubishi PLC input/output module, 8 x I/O, 24 V DC, 90 x 55 x 87 mm two network communication modules for FX3U PLC. These special function modules are mounted on the right side of the base unit and occupy 8 input/output points FX3U-64 ...
|
|
FX2N-8EX-ES/UL Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX2N-8EX-ES/UL Introduction: Mitsubishi PLC Power Module, 8 Inputs, 8 → 64 outputs are available in 8 or 16 input or output point sizes. They are connected directly to the front right of the base unit or extension unit (see digital extension unit below) and are connected by these installations.
|
|
FX3U-2HC Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3U-2HC Introduction: Mitsubishi PLC High-Speed Counter Module FX3U Series, 4 inputs, 4 outputsMitsubishi FX3U Series High-Speed Counter Modules. These high-speed counter blocks are available as ultra-high-speed counters or counters that can be connected to the main FX unit. FX3U Series ...
|
|
QY80 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QY80 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 12 → 24 V DC, 98 x 27.4 x 90 mm16 bit transistor output channel, rated at 24V DC, located in a single Q series slot Equipped with screw terminal blocks for direct connection to the transmission ...
|
|
QX80 Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QX80 Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 16 x I/O, 24 V DC, 98 x 27.4 x 90 mm, 16-bit input channel, rated at 24 V DC, in a single Q Series slot Equipped with screw terminal blocks for direct connection to input ...
|
|
FX5-16ET/ESS-H Japan Mitsubishi/Mitsubishi Electric PLC I/O module
FX5-16ET/ESS-H Introduction: Mitsubishi FX5 Series PLC I/O Module, 16 x I/O, 1.6 A, 24 V DC, 40 x 90 x 83 The first model in the mmiQ-F series is the FX5U, which offers high performance in a compact, cost-effective package. The FX5U continues the ...
|
|
FX3U-16CCL-M Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3U-16CCL-M Introduction: Mitsubishi Mitsubishi PLC Smart Function Module FX3U Series, 32 inputs, 8 outputsMitsubishi's FX3U series network CC-Link blocks. These two CC-Link V2 units, the FX3U-16CCL-M main block and the FX3U-64CCL interface block are available ...
|
|
FX3G-CNV-ADP Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX3G-CNV-ADP Introduction: The Mitsubishi PLC Expansion Adapter Module accessory can be used with all FX3G Series PLCs.
Mitsubishi/Mitsubishi Electric _FX3G-CNV-ADP
Model features introduced
FX3GPLCs accessory accessories can be integrated with all FX3G series PLCs.
|
|
QY81P Japan Mitsubishi/Mitsubishi Electric PLC I/O module
QY81P Introduction: Mitsubishi MELSEC Q Series PLC I/O Module, 32 x I/O, 12 → 24 V DC, 98 x 27.4 x 90 mm32 bit transistor output channel, rated at 24V DC, located in a single Q series slot QY81P uses connectors and plug-in ...
|
|
FX5-1PSU-5V Japan Mitsubishi/Mitsubishi Electric PLC power supply
FX5-1PSU-5V Introduction: Mitsubishi FX5 Series PLC Power Supply, For Use With FX5U CPU Module, FX5UC CPU Module, 100 → 240 V AC Line Voltage, 24 V dc, 5 V dc Output Power Supply, 1.2 A @ 5 The first model in the ViQ-F series is the FX5U, ...
|
|
Mitsubishi/Mitsubishi Electric Module FX5-80SSC-S 4 output/input
FX5-80SSC-S Introduction: Mitsubishi PLC Simple Motion Module FX5 Series, 4 Inputs, 4 Outputs The first model in the iQ-F series is the FX5U, which offers high performance in a compact and economical package. The FX5U carries on the F...
|
|
Mitsubishi Electric Logic Module FX3G-60MR-ES 36 input
FX3G-60MR-ES Introduction: Mitsubishi Logic Module, Relay Output, 36 x Input, 24 x Output, 100 → 240V (AC), 175 x 90 x 86 mm, Logic Control Module
Model features introduced
FX3GCPU base device FX3G is considered to be FX1N's ...
|
|
FX2N-8EYT-ESS/UL Japan Mitsubishi/Mitsubishi Electric PLC expansion module
FX2N-8EYT-ESS/UL Introduction: Mitsubishi PLC power module, 8 → 64 inputs, 8 → 64 outputs are available in 8 or 16 input or output point sizes. They connect directly to the front right of the base unit or extension unit (see digital extension unit below) and ...
|
|
Q63P Japan Mitsubishi/Mitsubishi Electric PLC power supply
Q63P Introduction: Mitsubishi Q63 Series PLC Power Supply, For Use With MELSEC Q Series, 24 V DC Line Voltage, 5V DC Output Power Supply, 6 A Output, 55.2 x 98 x 90 mm This DC input power supply unit is designed to provide the 5V DC required by Q Series modules. ...
|
|
Contact
working hours
