Pro-face, the global human-machine interface specialist, will celebrate the 30th anniversary of its programmable HMI GP series in February 2019! The proface programmable HMI GP series products began to receive orders in November 1988, 198 ...

A simple repair method for the Profis touch screen. The touch screen is not allowed Solution: This phenomenon may be that after the maintenance and use of the Profis touch screen for a period of time, the reflective stripes around the screen are covered with dust, which can be wiped with a dry soft cloth, and then cut off the power and restart ...

Profis touch screen instruction manual operation Do not disassemble or correct the GP as this may cause fire or electric shock. Do not operate the GP in an environment where flammable gases are present, as this may cause an explosion. connection To prevent electric shock or damage to the equipment, before installing the GP or connecting the GP wires...

Profis Touch Screen Programming Software is a very professional programming software. It is the screen and logic programming software developed by Pro-face for its human-machine interface contact screen, which supports dedicated human-machine interface and open human-machine interface (according to PC), which can be completed with data compatibility, ...

Judgment and elimination of common faults of touch screen 1. Analysis and treatment method of surface acoustic wave touch screen fault phenomenon Fault 1: Touch deviation Phenomenon: The position of the finger touch does not coincide with the mouse arrow. Analysis: After installing the driver, when correcting the position, there is no vertical touch ...

Pro-face Pro-face touch screen repair problems encountered and the specific process of solving. 1. The touch screen is not allowed. A surface acoustic touch screen, touching the part of the monitor screen with your finger cannot complete the corresponding operation normally. Solution: This phenomenon may be Pro-face ...

What should I do if the picture is stuck? cause A large number of parts on the front layer and painting make it possible to draw complex processes on the front layer, which can cause the HMI to be too slow to respond. When using the animation feature, the pre-layer and the base layer represent the configured domains. The preceding and basic layers are distinguished by a layer separator. Notes: As ...