1. The larger the object, the more light is reflected and the farther the sensing interval is. 2. For visible red light sensors, light colors can be detected at a greater scale than dark colors. The color of the target object has a much smaller effect on the infrared light sensor. Compared to a flat or matte appearance, a highly reflective ...

1. Inspection interval Detect the stop, start and orientation of elevators and lifting equipment; Detect the orientation of the vehicle to prevent two objects from colliding; Detect the setting orientation of the operating machinery and the limit orientation of the moving machine or components; Detect the abort azimuth of the rotary body, the opening or closing of the valve; Detection of pneumatic or hydraulic cylinders ...

ifm pressure sensors of type PN are used in industrial applications: One is robust: an ideal measuring element for all types of pressure scales; Second, red-green scale: according to the color of the display, you can quickly identify the "outstanding scale" or switching state; The third quick setting: by pressing the ...

The first is pressure, and the transmitter cannot afford to lose it. In this case, check if the pressure connector is leaking or clogged, if not, check the wiring method and see if the power supply is normal, simple pressure to confirm if the output has been changed, or if there is an output at the zero point of the sensor ...

1. Encoder own problem: It refers to the problem of the encoder's own components, resulting in its inability to generate and output correct waveforms. In this case, the encoder needs to be replaced or its internal components repaired. 2. Encoder connection cable problem: the probability of this problem is high, and the maintenance is under repair.

1) Urban construction the use of interferometric screws and optical pressure sensors for bridges, dams, oil fields, etc.; embedding fiber optic sensors or reinforced fiber agglomerates in concrete; Traffic is monitored at airports using an interferometric fiber-optic vibration sensor system. 2) Civil Engineering and Environmental Supervision

The maintenance of the sensor is an important step to ensure its normal operation and extend its service life. Here are some claims for caring for your sensors: 1. Regular cleaning: Sensors may be affected due to the accumulation of dust, grime, or chemicals. It is necessary to clean the sensor regularly, ...

The S-type sensor is actually a deformation of the parallel beam structure, so it is not only highly accurate but also easy to use, and has many applications, such as the modification of hopper scales and weighbridges. S-type sensors are now widely used in industrial manipulation and inspection sites. Because of its high-frequency dynamic response, it is mainly used for ...

Pressure sensors are one of the more common sensors. Conventional pressure sensors are primarily mechanical devices, and the deformation of elastic parts indicates pressure. However, due to their size and weight, they are unable to generate electricity. The development of semiconductor skills has also led to the emergence of semiconductor pressure sensors.

Ultrasonic sensors are sensors that convert ultrasonic signals into other energy signals, usually electrical signals. Ultrasonic waves are mechanical waves that oscillate at frequencies higher than 20KHz. It has high frequency, short wavelength, small diffraction phenomenon, especially good directionality, can become a ray and directional propagation, etc.

Any sensor made by using magnetic properties and magnetic flux changes is called a magnetic sensor. There are two common types of magnetic sensors: piezomagnetic sensors and magnetoelectric sensors. The two types of sensors are quite different in terms of operating principle and range of use. ...

1. When measuring the liquid pressure, in order to prevent the sensor from being damaged by overpressure, the device position of the sensor should prevent the impact of the liquid. 2. When measuring steam or other high-temperature media, it is necessary to connect a condenser such as a buffer pipe. 3. The impulse pipe should be installed in a place where the temperature fluctuation is small. ...

ifm flow sensor solutions. IFM Flow Sensor SV5200, Vortex Flow Sensor with User Friendly Display, Circuit Connection Can Be Rotated for Optimal Arrangement, With Switching Output or Frequency Output, and IO-Link for Reliable Flow Detection ...

The primary function of a sensor is to detect and measure physical quantities or phenomena in the environment and convert them into usable electrical signals or other means of output signals. The functions of sensors can be summarized in the following aspects: 1. Detection: ...

Easy-to-install sensor with long-service life electronic GMR unit – flush unit This sensor can be conveniently installed in a C-slot Fixed at the end of the housing for stable elastic stress relief A variety of ...