Fluke/Fluke 772 mAh Process Clamp Meter

Perform 4-20 mA signal measurements without disconnecting the loop and save time.

Are you wasting valuable time?

The mA measurement is performed by disassembling the line and disconnecting the loop

Call the control room to isolate the loop

Test the analog inputs/outputs on the console

Troubleshoot devices with mA inputs and outputs

Troubleshoot 4-20 mA circuits that have intermittent problems or instability

Return to the shop floor for additional tools

If you're always on the go and never run out of time, give the Fluke 772 mAh Clamp Meter a try. These clamp meters eliminate the need to perform some time-wasting activities, which can greatly save time and money. Now you don't have to disconnect the circuit or shut down the system to diagnose and repair the 4-20 mA circuit.

Here are some of the things the Fluke 772 Clamp Meter can do for you:

Milliampere clamp meter characteristics	apply	How to save time and money
The mA signal of the analog I/O of the PLC and control system can be measured without disconnecting the loop	Measure weak direct current	Correlate process instructions with real-world physical values
The output signal of the conveyor can be measured without disconnecting the loop	Processes and automation equipment can be maintained and diagnosed without disconnecting circuits	No disruption to the process
Detachable clamp meter with extension cord	Measurements can be performed in confined spaces	Allows measurements to be carried out in a variety of difficult situations
Measure the spotlight	Illuminate hard-to-find lines in a dark chassis	The measurement process is easier and faster
A maximum current of 99.9 mA can be measured non-contact	Wide measuring range	Measure 10 to 50 mA signals in the old control system
Automatic power off	Automatically turn off the backlight and spotlight after 15 minutes and 2 minutes	Extend battery life

Features of the Fluke 772 mA Clamp Meter:

Good 0.2% accuracy

0.01 mA resolution and sensitivity

There is no need to "disconnect the loop" to measure a 4 to 20 mA signal

Measure the mA signal of the analog I/O of the PLC and control system

Dual backlit displays for mA measurements and 4 to 20 mA percentage of range

Measurement spotlights illuminate hard-to-see lines inside dark enclosures

Detachable clamp meter with extension cord for measurement in tight spaces

The 10 to 50 mA signal in the old control system was measured using a 99.9 mA range

Automatically change the 4 to 20 mA output for remote testing

Power-saving features such as auto-shut-off, backlight timeout, and more extend battery life

"The hold function captures and displays changing measurements

Measure 4 to 20 mA signals via the "Pen Access Loop Measurement Function."

Synchronize the 24V loop power supply and measure the loop mA signal to power the transmitter and test it

Output 4 to 20 mA signal sources to test control system I/O or I/P

mA output linear gradient or 25% step-by-step output

Automatically change the 4 to 20 mA output for remote testing

We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

This article introduces the Fluke/Fluke 772 mAh process clamp meter products, if you are interested in Fluke/Fluke products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

Fluke/Fluke 772 mAh Process Clamp Meter

Sections viewed

Contact

working hours