Fluke/Fluke 773 mAh Process Clamp Meter

Perform 4-20 mA signal measurements without disconnecting the loop and save time.

Are you wasting valuable time?

The mA measurement is performed by disassembling the line and disconnecting the loop

Call the control room to isolate the loop

Test the analog inputs/outputs on the console

Troubleshoot devices with mA inputs and outputs

Troubleshoot 4-20 mA circuits that have intermittent problems or instability

Return to the shop floor for additional tools

If you're always on the go and you're never running out of time, give the Fluke 773 Milliampere Clamp Meter a try. These clamp meters eliminate the need to perform some time-wasting activities, which can greatly save time and money. Now you don't have to disconnect the circuit or shut down the system to diagnose and repair the 4-20 mA circuit.

Here are some of the things the Fluke 773 Clamp Meter can do for you:

Milliampere clamp meter characteristics	apply	How to save time and money
The mA signal of the analog I/O of the PLC and control system can be measured without disconnecting the loop.	Measure weak direct current	Correlate process instructions with real-world physical values
The output signal of the conveyor can be measured without disconnecting the loop	Processes and automation equipment can be maintained and diagnosed without disconnecting circuits	No disruption to the process
Detachable clamp meter with extension cord	Measurements can be performed in confined spaces	Allows measurements to be carried out in a variety of difficult situations
mA signals in output, analog, and measurement circuits (open loops)	Confirm non-contact measurements. Have a backup tool on hand to deal with failures (source simulation)	Once a bad signal has been found with non-contact measurement, there is no need to go back to the shop floor for a loop calibrator to troubleshoot
Output and measure VDC sources	Troubleshoot voltage input and output devices.	Measure the presence of a 24V loop power supply. Measure 1 to 5 or 0 to 10V process signals.
Output and measure VDC sources	Troubleshoot voltage input and output devices.	Test the chart recorder
4 to 20 mA input/output	Dual-channel mA source and measurement for troubleshooting	A 4 to 20 mA signal is transmitted to the valve and mA signal conditioner, and then the 4 to 20 mA position-controlled output signal is measured simultaneously.
4 to 20 mA proportional output	The proportional mA output provides an mA signal output that represents the measured mA value	There is no need to disconnect the loop to connect the Digital Multimeter (DMM) with recording/graphing function and record mA signals
Loop power is provided	Power the conveyor	Testing to replace an installed 24V loop power supply. Power the conveyor and measure its mA output signal for troubleshooting.
Dual backlit displays for mA measurements and 4-20 mA percentage of range	Clear measurement display	Allows for quick measurement evaluation
Measure the spotlight	Illuminate hard-to-find lines in a dark chassis	The measurement process is easier and faster
A maximum current of 99.9 mA can be measured non-contact	Wide measuring range	Measure 10 to 50 mA signals in the old control system
Automatic power off	Automatically turn off the backlight and spotlight after 15 minutes and 2 minutes	Extend battery life

We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

This article introduces the Fluke/Fluke 773 mAh Process Clamp Meter products, if you are interested in Fluke products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

Fluke/Fluke 773 mAh Process Clamp Meter

Sections viewed

Contact

working hours