INVT inverter GD20-09-0R7G-4-B protection grade IP20

Introduction:INVT Inverter GD20-09-0R7G-4-B, GD20-09 series hoisting inverter for electric hoist, European crane, small tonnage gantry or overhead crane load characteristics and control requirements research and development of special open-loop vector inverter for lifting, in line with lifting industry standards, integrated lifting special functions, compact structure, excellent performance, a full range of built-in braking units, through the overall design of electromagnetic compatibility and strict reliability testing, It meets the user's environmental requirements for low noise and low electromagnetic interference in the application site, and greatly improves the reliability of the product.

INVT inverter GD20-09-0R7G-4-B protection grade IP20

Features:

All models are equipped with a built-in braking unit as standard

Dedicated terminal design, more diverse choices

Special brake logic: brake logic control fusion torque verification, brake release control after torque establishment is completed, safety does not slip;

The logic control of the brake supports the selection function of starting direction and forward and reverse switching, which meets various starting requirements and has good adaptability.

Application macro: Integrate a variety of lifting application macro modes and support user-defined macros, one-click debugging, and simpler application.

Conical rotor motor control: The magnetic flux is adjusted according to the characteristics of the conical rotor motor, which realizes fast brake release and brake holding control, simplifies the commissioning steps, and ensures safety.

Product parameters

Description of the function		Specifications
Power input	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V
	Input Current (A)	Please refer to "Product Ratings"
	Input Frequency (Hz)	50Hz or 60Hz, allowable range 47~63Hz
Power output	Output Voltage (V)	0~Input voltage
	Output Current(A)	Please refer to "Product Ratings"
	Output Power (kW)	Please refer to "Product Ratings"
	Output Frequency (Hz)	0~150Hz
Technical control performance	Control mode	Space voltage vector control mode, no PG vector control mode
	Motor type	Asynchronous motors
	Speed ratio	Asynchronous machine 1:200 (SVC)
	Speed control accuracy	±0.2% (without PG vector control)
	Fluctuations in speed	± 0.3% (without PG vector control)
	Torque response	<20ms (no PG vector control)
	Torque control accuracy	10% (no PG vector control)
	Starting torque	Asynchronous machine: 0.25Hz/150% (no PG vector control)
	Overload capacity	Meet the requirements of the working system S3 load
	Braking capacity	100% braking power for long-term operation, 120% braking power for 1 minute, 170% braking power for 10 seconds
Operational control performance	Frequency setting method	Digital setting, analog setting, multi-speed operation setting, MODBUS communication setting, etc Realize the combination of settings and the switching of setting channels
	Automatic voltage adjustment function	When the grid voltage changes, it can automatically keep the output voltage constant
	Fail-safe function	Provide more than 30 kinds of fault protection functions: over-current, over-voltage, under-voltage, over-temperature, phase loss, underload, overload and other protection functions
Peripheral interfaces	Terminal analogue input resolution	Not more than 20mV
	Terminal switching input resolution	Not more than 2ms
	Analog inputs	1 channel, AI2: 0~10V/0~20mA Models of 5.5kW (inclusive) and above are compatible with PT100 resistor input, which can be set by AI or PT100 by DIP switch;
	Digital inputs	8 normal inputs, two of which support PTC input, PTC operation at 2.5kΩ Internal impedance: 6.6kΩ; Maximum input frequency: 1kHz; Support internal power supply 24V; Support external power supply (-20%), 24~48VDC(+10%), (-10%), 24~48VAC (+10%) voltage input; Bidirectional input terminals, supporting both NPN and PNP connections
	Relay output	Three programmable relay outputs R01A normally open, R01B normally closed, R01C common end R02A is normally open, R02C is common R03A normally open, R03C common end Contact capacity: 3A/AC 250V, 1A/DC 30V
other	Operating ambient temperature	-10~50°C, derating above 40°C
	Ingress protection	IP20
	Pollution level	Level 2
	Cooling method	Forced air cooling
	Brake unit	Built-in for the whole series
	elevation	Below 1000 meters, derating above 1000 meters, derating 1% for every 100 meters
	DC reactors	Models of 18.5kW (inclusive) or more are equipped with a built-in DC reactor as standard
	EMC filters	Three-phase 380V 5.5kW (inclusive) or above products can meet the requirements of IEC61800-3 C3 level, can be connected to the jumper J10 by themselves, and the rest of the products can be equipped with external filters to meet the requirements of IEC61800-3 C3 level, and the whole series of products can be equipped with external filters to meet the requirements of IEC61800-3 C2 level

Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.

This article introduces INVT inverter GD20-09-0R7G-4-B products, if you are interested in INVT inverter, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience

INVT inverter GD20-09-0R7G-4-B protection grade IP20

Sections viewed

Contact

working hours