Introduction: AirTAC GR Series Pressure Regulator GR600-25
Features:
Built-in square pressure gauge is used to save installation space (external round pressure gauge can also be used);
Press-in self-locking mechanism can prevent abnormal pressure adjustment due to external interference;
The pressure adjustment mechanism adopts the design of balance, the pressure adjustment is stable, the drift is small, and the pressure characteristics are good;
In addition to panel installation, optional fixed bracket installation;
In addition to the standard form, there is also a low-pressure type (up to adjustable pressure 0.4MPa);
Product parameters
Working medium: air
Pipe caliber: PT1
Voltage regulation range: 0.05-0.9MPa
Maximum operating pressure: 1.0MPa
Guaranteed pressure resistance: 1.5MPa
Weight: 1700g
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
If you are interested in AIRTAC GR Series Regulator GR600-25, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
AirTAC Fluid Control Valve 2KSH050-15 cv value 0.34
Introduction: AirTAC Fluid Control Valve 2KSH050-15
Features:
Direct-acting normally open two-port two-position solenoid valve, fast and sensitive reversing;
The pressure range is wide, and there are ultra-high pressure type (X), high pressure type (H), standard type, and large flow type (L) to choose from;
...
|
|
AirTAC Fluid Control Valve 2V025-08
Introduction: AIRTAC/AirTAC Fluid Control Valve 2V025-08
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The structure is light and compact;
Product parameters
Working medium: air, water, oil
Actuation: ...
|
|
AirTAC Solenoid Valve 4V330C-08 Guaranteed pressure resistance of 1.2MPa
Introduction: AirTAC solenoid valve 4V330C-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve is available with three central functions;
...
|
|
AIRTAC 4M Series Solenoid Valve G3/8mm
Introduction: AIRTAC/AirTAC 4M series solenoid valve sliding column structure, good sealing, sensitive response; The double-head solenoid valve has a memory function; The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life; Side-mounted face mounting, direct connection to actuators ...
|
|
AirTAC Pneumatic Control Valve 5A220-06 actuation frequency 3 seconds/time
Introduction: AirTAC Pneumatic Control Valve 5A220-06, sliding column structure, good sealing, sensitive response; The three-position pneumatic valve is available with three intermediate functions; Double-head two-position air control with memory function;
Features:
Strut structure, good sealing, sensitive response ...
|
|
AirTAC Pneumatic Valve 4A130E-M5 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pneumatic Control Valve 4A130E-M5
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-headed two. Position air control has a memory function;
The inner bore adopts a special ...
|
|
AirTAC Solenoid Valve 3V220-08 Guaranteed pressure resistance of 1.2MPa
Introduction: Airtac Solenoid Solenoid Valve Solenoid Valve 3V220-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The double-ended solenoid valve has a memory function:
The bore is made of ...
|
|
AirTAC Pneumatic Valve 4A210-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A210-08
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC solenoid valve base 7V300M
Introduction: AirTAC solenoid valve base 7V300M
Features:
The same series of directional control valves can be integrated into the valve group, saving space and cost;
Unified intake, exhaust, unified wiring, easy to find when there is a fault;
Flexible combination, expandable ...
|
|
AirTAC Fluid Control Valve 2KL030-08 Flow orifice diameter 3mm
Introduction: AirTAC Fluid Control Valve 2KL030-08 has a wide range of pressures, and is available in high-pressure type (H) and standard type
Features:
Direct-acting normally open two-port two-position solenoid valve, fast and sensitive reversing;
Wide range of operating pressures, including high-pressure type (H) ...
|
|
AirTAC Fluid Control Valve 2W150-15 has a maximum pressure resistance of 1.5MPa
Introduction: AirTAC fluid control valve 2W150-15 has compact structure, small size, light weight, easy assembly and disassembly;
Features:
Piston pilot normally closed two-port two-position solenoid valve, rapid reversing and large flow rate:
Compact structure, small size, light weight, assembly and disassembly ...
|
|
AIRTAC/AirTAC 3A100 Series Pneumatic Control Valve Slide column structure
Introduction: AIRTAC 3A100 series pneumatic control valve slide column structure, good sealing, sensitive response; The inner hole is processed by special technology, with low friction resistance, low starting air pressure and long service life; Multi-position installation, easy to install and use; Manifold can be integrated with the base to save installation space ...
|
|
AirTAC Solenoid Valve 3V206 guarantees pressure resistance of 1.2MPa
Introduction: AIRTAC solenoid valve 3V206, coaxial cut-off structure, good sealing, large flow rate
Features:
Direct-acting structure, sensitive reversing;
Normally closed and normally open are available;
Coaxial cut-off structure, good sealing, large flow rate;
...
|
|
AIRTAC CM3 Series Mechanical Valve CM3-05 External control
Product introduction: CM3 series is manual operation, a variety of structure and shape control heads, convenient for use under different conditions; Cut-off structure, good sealing, flexible reversing, no need for oil lubrication; Multi-position installation, easy to install and use; The control head is made of metal, which has a long service life and is more reliable and stable;
...
|
|
AIRTAC Micro Linear Slide LRM7N1X40AAAH 0.5g
Introduction: AIRTAC/AirTAC LRM series miniature linear slide rails LRM7N1X40AAAH stainless steel, high rigidity, corrosion resistance, different sliders share the same type of slide rail. Steel ball Japanese-made steel column, roundness and wear resistance, beautiful appearance, screws are not exposed, protective seals, and large dust is discharged. ...
|
|
AirTAC 4V Series 2/5-Way Solenoid Valve 4V110M5B Rated Voltage DC24V
Introduction: AirTAC 4V Series 2/5-way Solenoid Valve 4V110M5B
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve has three central functions for ...
|
|
AirTAC Pneumatic Valve 4A210-06 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A320-10
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC Pneumatic Valve 6A0530 is made of aluminum
Introduction: AirTAC Pneumatic Control Valve 6A0530, body material aluminum alloy, body aluminum alloy extrusion, inner hole with special process processing, ** increase the flow rate, can be integrated with the base valve group, save installation space.
Features:
Body aluminum alloy extrusion, inner hole ...
|
|
AirTAC Pneumatic Valve 4A420-15 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A420-15
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-head two-position air control with memory function;
The inner bore adopts a special ...
|
|
Airtac LSH Series Standard Linear Slide 25 Standard Hole Margin 20mm
Introduction: AIRTAC LSH series standard linear slide rail 25, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the installation surface, it can be maintained by the internal absorption well of the slider smooth and stable linear motion.
...
|
|
Contact
working hours
