Introduction: AIRTAC/AirTAC LRM series miniature linear slide rails LRM7N1X40AAAH stainless steel, high rigidity, corrosion resistance, different sliders share the same type of slide rail. Steel ball Japanese-made steel column, roundness and wear resistance, beautiful appearance, screws are not exposed, protective seals, and large dust is discharged. The mounting datum must be polished or finely ingot processed to ensure the accuracy of linear rail travel.
Product Advantages:
Common slide rail design: stainless steel, high rigidity, corrosion resistance, different sliders share the same type of slide rail
Steel ball protection design: the steel column does not fall, easy to install and replace
Steel balls: Japanese steel columns, roundness and wear resistance
The appearance is beautiful, the screws are not exposed, the sealing sheet is protected, and the large dust is discharged.
Installation baseline
• The mounting datum must be polished or finely ingot processed to ensure the accuracy of linear guideway walking.
• Slide rail, slider: both sides can be used as the installation datum.
• When using more than two sliders on a single track, it is recommended that the datum be installed on the same side to achieve better walking accuracy.
Slippery
When the linear slide rail is in a good lubricated state, it can greatly reduce the bottom wear and improve the service life. Lubricants have such as:
Lower effect: • Reduce the friction between the rolling element and its contact surface, so that the wear is reduced at least;
• Formation of an oil film between the contact surfaces, which can prolong the rolling fatigue life;
• Prevents rust.
Product parameters
Brand: AirTac/AirTAC
Model: LRM7N1X40AAAH
Weight: 0.5 g
Type: Miniature linear slide
Material: Stainless steel
Voltage regulation range: 0.15-0.9MPa
Operating temperature: -20-70
Applicable medium: air
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the AIRTAC LRM series miniature linear slide LRM7N1X40AAAH weighs 0.5g products, if you are interested in AIRTAC rail, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
AirTAC Fluid Control Valve 2WL050-10 cv value 1.4
Introduction: AirTAC Fluid Control Valve 2WL050-10
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of operating pressures, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L), extra-large flow type...
|
|
AirTAC Pneumatic Control Valve 3A120-06 Working medium air
Introduction: AirTAC Pneumatic Control Valve 3A120-06, the inner hole is processed by special technology, with low friction resistance, low starting air pressure and long service life
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function
Hole...
|
|
AirTAC Fluid Control Valve 2L150-15 Weight 675g
Introduction:AirTAC Fluid Control Valve 2L150-15, direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of operating pressures, high pressure type (H), standard ...
|
|
AirTAC HSV Series Hand Spool Valve Aluminum HSV06 Manual
Product introduction: a variety of internal and external threaded connection forms, suitable for different pipeline systems; Reversing and sliding Sun Chang, it feels good; The effective circulation area is up to; The surface of the spool is hard anodized, and the surface of the valve body is anodized, and the color is maintained for a long time.
Products...
|
|
AirTAC Solenoid Valve 3V210-08 Guaranteed pressure resistance of 1.2MPa
Introduction: Airtac solenoid valve 3V210-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The double-ended solenoid valve has a memory function:
The inner bore adopts a special ...
|
|
AirTAC 4M Series 2/5-Way Solenoid Valve 4M31008B Single Electronic Control
Introduction: Airtac 4M Series 2/5-way Solenoid Valve 4M31008B
Features:
Internally pilot-operated construction;
Sliding column structure, good sealing, sensitive response;
The double-head two-position solenoid valve has a memory function;
The inner bore adopts a special process ...
|
|
AirTAC Pneumatic Valve 4A130E-M5 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pneumatic Control Valve 4A130E-M5
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-headed two. Position air control has a memory function;
The inner bore adopts a special ...
|
|
AirTAC GA Series - Air Manifold GA200-06 Cross
Product introduction: Installed between the G series pressure regulator and the G series oil feeder, the air flow is branched, one way enters the feed for oil lubrication, and the other directly enters the use of equipment. A variety of brackets are connected with pressure regulators and oil feeds, and the brackets available for selection are: T-type, type, U-shape.
...
|
|
AirTAC Fluid Control Valve 2KL400-40 cv value 31
Introduction: AirTAC Fluid Control Valve 2KL400-40
Features:
Piston pilot normally open two-port two-position solenoid valve, rapid reversing and large flow;
Compact structure, small size, light weight, easy to assemble and disassemble;
Coil protection class 1P65, power connection ...
|
|
AirTAC Solenoid Valve 4V230E-08 Guaranteed pressure resistance of 1.2MPa
Introduction: AirTAC solenoid valve 4V230E-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve is available with three central functions;
...
|
|
Airtac BFR Series Filter Regulator BFR40001
Introduction: AIRTAC BFR Series Filter Regulator BFR40001
Features:
The structure is light and compact, easy to install and use;
Press-in self-locking mechanism can prevent abnormal pressure adjustment due to external interference;
Low pressure loss and high water separation efficiency ...
|
|
AirTAC 3V100 Series 3-Way 2-position Solenoid Valve 3V11006NCB rated voltage DC24V
Introduction: AirTAC 3V100 Series Three-way Two-position Solenoid Valve 3V11006NCB
Features:
Pilot mode: internally guided or externally guided optional:
Junzhu structure, good sealing, sensitive response:
The double-ended solenoid valve has a memory function:
...
|
|
AirTAC Induction Check Valve PCV10 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Induction Check Valve PCV10
Features:
safety circuit for pressure holding;
The cylinder stops positioning instantaneously;
Special circuit design applications;
The new pilot port cannula type can effectively save safety space and improve safety efficiency
...
|
|
AirTAC Fluid Control Valve 2LH030-06 Weight 300g
Introduction: AIRTAC fluid control valve 2LH030-06 has a wide range of pressures, and high-pressure type (H) and standard type are available
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of pressure, high pressure type (H), standard ...
|
|
AirTAC Pneumatic Valve EVA200 Series Guaranteed pressure resistance of 1.5MPa
Introduction: AIRTAC Pneumatic Valve EVA200 series, the valve body needs to be installed with a base, the base is shared with the ESV solenoid valve, there are two forms: single and multi-linked, and the multi-link base can be easily combined into any number;
Features:
Simple appearance and compact structure;
Connecting Surfaces ...
|
|
AIRTAC 4V100 Series Solenoid Valve Pressure 0.05-0.85mpa
Introduction: AIRTAC/AirTAC 4V100 series solenoid valve sliding column structure, good sealing, sensitive response; The double-head solenoid valve has a memory function; The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life; The valve stage can be integrated with the base to save installation space. ...
|
|
AirTAC Fluid Control Valve 2KS030-06 Weight 305g
Introduction: AirTAC Fluid Control Valve 2KS030-06
Features:
Direct-acting normally open two-port two-position solenoid valve, fast and sensitive reversing;
The pressure range is wide, and there are ultra-high pressure type (X), high pressure type (H), standard type, and large flow type (L) to choose from;
...
|
|
AirTAC solenoid valve base 100M
Introduction: Airtac solenoid valve base 100M
Features:
The same series of directional control valves can be integrated into the valve group, saving space and cost;
Unified intake, exhaust, unified wiring, easy to find when there is a fault;
Flexible and expandable ...
|
|
AirTAC Fluid Control Valve 2V025-08
Introduction: AIRTAC/AirTAC Fluid Control Valve 2V025-08
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The structure is light and compact;
Product parameters
Working medium: air, water, oil
Actuation: ...
|
|
AirTAC Solenoid Valve 2SX050-10 has a flow orifice of 3mm
Introduction:AIRTAC Solenoid Valve 2SX050-10 has a wide range of pressures, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L) and extra-large flow type (T).
Features:
Direct-acting, normally closed, two-port, two-position solenoid valve, reversing ...
|
|
Contact
working hours
