INVT inverter GD300-02-7R5G-4 protection grade IP20

Introduction:INVT Inverter GD300-02-7R5G-4, GD300-02 series through-wall inverter is a wall-penetrating special machine, designed and developed for the secondary pollution of inverters by foreign bodies such as cotton wool, dust, oil, etc., which improves the reliability of the product and the adaptability of the environment. The product adopts high-performance vector control technology, has good dynamic characteristics, and has built-in power-off synchronization, fault synchronization and other controls for the characteristics of the textile industry, which can realize safe shutdown under abnormal working conditions.

INVT inverter GD300-02-7R5G-4 protection grade IP20

Features:

The heat dissipation system and the electrical system are relatively separated, and the cotton wool, oil stains, etc. are effectively dealt with

Long-term, reliable operation at an ambient temperature of 50°C

Powerful drive performance, compatible with synchronous and asynchronous motors

The full series supports common bus schemes

Product parameters

Description of the function		Specifications
Power input	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V
	Input Current (A)	Please refer to "Ratings"
	Input Frequency (Hz)	50Hz or 60Hz, allowable range 47~63Hz
Power output	Output Voltage (V)	0~Input voltage
	Output Current(A)	Please refer to "Ratings"
	Output Power (kW)	Please refer to "Ratings"
	Output Frequency (Hz)	0~400Hz
Technical control performance	Control mode	Space voltage vector control mode, no PG vector control mode
	Motor type	Asynchronous motors, permanent magnet synchronous motors
	Speed ratio	Asynchronous machine 1:200 (SVC), synchronous machine 1:20 (SVC)
	Speed control accuracy	±0.2% (without PG vector control)
	Fluctuations in speed	± 0.3% (without PG vector control)
	Torque response	<20ms (no PG vector control)
	Torque control accuracy	10% (no PG vector control)
	Starting torque	Asynchronous machine: 0.25Hz/150% (no PG vector control) Synchronizer: 2.5 Hz/150% (without PG vector control)
	Overload capacity	150% rated current for 1 minute, 180% rated current for 10 seconds, 200% rated current for 1 second
Operational control performance	Frequency setting method	Digital setting, analog setting, pulse frequency setting, multi-speed operation setting, simple PLC setting, PID setting, MODBUS communication setting, PROFIBUS communication setting, etc. Realize the combination of settings and the switching of setting channels.
	Automatic voltage adjustment function	When the grid voltage changes, it can automatically keep the output voltage constant
	Fail-safe function	Provide more than 30 kinds of fault protection functions: over-current, over-voltage, under-voltage, over-temperature, phase loss, overload and other protection functions
	Speed tracking restart function	Shock-free smooth start of rotating motors Note: This function is available for 4kW or more.
Peripheral interfaces	Resolution of terminal analog input quantity	Not more than 20mV
	Resolution of terminal switching input quantity	Not more than 2ms
	Analog inputs	2 channels (AI1, AI2) 0~10V/0~20mA, 1 channel (AI3) -10~10V
	Analog output	2 channels (AO1, AO2) 0~10V /0~20mA
	Digital inputs	8 normal inputs, maximum frequency 1kHz, internal impedance: 3.3kΩ; 1 high-speed input, maximum frequency 50kHz
	Digital output	1 high-speed pulse output, maximum frequency 50kHz; 1 Y-terminal open collector output
	Relay output	Two programmable relay outputs RO1A is normally open, RO1B is normally closed, and RO1C is common RO2A is normally open, RO2B is normally closed, and RO2C is common Contact capacity: 3A/AC250V, 1A/DC30V
other	Installation:	Support through-wall (flange) installation
	Operating ambient temperature	-10~50°C, derating above 40°C
	Mean time between failures	2 years (25°C ambient temperature)
	Ingress protection	IP20
	Cooling method	Forced air cooling (external air duct cooling, wind speed greater than 2m/s)
	Brake unit	Built-in below 18.5kW (inclusive), external configuration is optional for 22kW (inclusive) or more
	EMC filters	380V built-in C3 filter: meets the requirements of IEC61800-3 C3 level Optional external filter: meets the requirements of IEC61800-3 C2 class

Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.

This article introduces INVT/INVT inverter GD300-02-7R5G-4 products, if you are interested in INVT/INVT inverter, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience

INVT inverter GD300-02-7R5G-4 protection grade IP20

Sections viewed

Contact

working hours